boring mills, machining centers used for sale

Manufacturer: Biesse , Type: Insider FT 2, Year: 2001, Control: Biesse NC 100, Software: Biesseworks, Maschinensteuerung: CNI, Online connection: möglich, Machining stations: 2, Working range X: 3500, Working range Y-axis: 1300, Working range Z: 60, Vertical drilling station from above: 2, Automatic setting up: yes, Drilling supprt from bottom: 4, Milling spindles vertical: 2, Power kW 2: ca.5,5, RPM min-max 2: 24000, Horizontal drills-X: 24, Drill horizontal Y: 8, Continuous flow system: yes, Lochraster: 32, Working range max mm: 60, Machining stations: 2, Year :2001

Used Hole Row Drilling Machine Int. Art. Ref. k0919 Manufacturer: Ganner Type 204 Red Baron Year of construction 2001 Power 0.75 kW Right and left hinge Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and leg ...

SECOND-HAND 5 AXIS CNC WORKING CENTER BACCI MOD. SMART – CE RULES - strokes: longitudinal axis x 1500mm transversal axis y 1800 mm vertical axis z 1000 mm. axis b unlimited axis c 400° - cn osai - type head 2+2 - rpm 0-24.000 - vacuum pump - cabin - volt. 380/50 - sn 120 - year 2001

Biesse Italy, Rover 22 CNC Machining Center Built in 2001 SN 07498 Workspace 4 axes X-axis 3060 mm Y-axis 1080 mm Z-axis 155 mm 6 consoles with 18 vaccum suction holder 4 pneumatic bakelite rods for lifting the plate Vertical electric spindle 7.5 kW with automatic tool change, ISO 30 cone Automatic tool change 7 positions on the working head Drill head with 20 spindles arranged as follows: 7 vertical in X-axis 7 permeable to Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Groove saw 120mm Safety tread mats 110 m3 / h vacuum pump CE marked Weight 3500 Kg Technical information subject to reservation

SCM machining center model RECORD 130TV: - axis travel X=4330 - Y=1720 - Z=300mm - useful working range 3830 x 1245mm - piece passage 280mm - worktop with 6 TV bars - laser for positioning aid - supplied with 12 suction cups and 12 clamps for TV bars - 3 loading aids - rubbish drain mat - 100 mc/h vacuum pump - automatic lubrication - optimized and centralized suction - electronic control with PC-OFFICE, in Windows system and XILOG PLUS interface - dimensions installed with protections mt 8,4 x 5,9 Operator groups: - vertical spindle type POWER2000 liquid cooled, motor KW 11 with inverter, HSK63F connection, with 4th vector rotating axis, served by: Dual RAPID tool changer at 12 + 12 positions rear tool room with 12 + 12 positions - UNIVERSAL K horizontal milling unit with 2 outputs (tip + blade), adjustable 0-90° , KW 3 motor Machine according to CE standards No ...

Servo motor vector axis scm Record complete Tamagawa TRE TS3351N16E196, Encoders EH38M500Z5L6X3PR Tested used part  ... more information

Table height manually adaptable: 0 - 20 cmmax oscillation of the table: 20 cmmax drilling depth: 13 cmtable: 53 x 23 cmmotor: 1,5kW ... more information

Manufacturer: Biesse , Type: Rover 24, Year: 2002, Software: Compass kann mit gekauft werden, B-axis: 100/50/20, Maschinensteuerung: 6170, Programming station office: 1380, Work piece width min-max mm: 150, Min.-max. workpiece length in mm: yes, Aluminium processing: 1, Throuh running machine: HSK F-63, Feeding speed max m/min: 7.5, Pendulum processing: 1800-24000, Number of milling spindles vertical: 1, Tool adaption system: 24, Milling engine 1 hours power: 8, rpm 1): 7, Milling engine 2 hours power: 4, rpm 2): 2, Working widht max mm: 2, Vertical drills-X: 10, Drill vertical Y: yes, Horizontal drills-X: yes, Drill horizontal Y: 100, Aluminium sleeking table: yes, 4 station allocation: yes, Rigging support table: yes, Edgeband hight mm: yes, Radial arm machine: 1 Winkelgetriebe, machine ready for demonstration: Deckenlaser und Hubschwingen, Year :2002

Manufacturer: HomagTürenfertigung mit mit Verleimteil und KUKA Roboter, Type: BOF / BAZ20/50/18/2/D, Year: 2002, Control: Homatic PC 83, Software: Woodwop, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Working range X: 5800, Working range Y-axis: 1600, Working range Z: 160, C axis: 2, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Number of milling spindles vertical: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 14,5, rpm 1): 1500 - 18.000, Milling engine 2 hours power: 14,5, rpm 2): 1500 - 18.000, Kettenwechsler: 70, Pickup Wechlser: 6, Number of tools per tool-magazine: 6 + 70+ 20, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 66, Rigging sup ...

Description: Serial Number: 22319 Working area:  , X = 6000 mm Y = 1200 mm , Vertical boring spindles: , in X:16 , in Y:11 Horizontal boring spindles: , in X: 2 in Y:1 NUM control, IMAWOP Softawre on windows Installed power: 17kw Vacum pump included , serial number: 22,319, Approx. Onsite Dimension. (l x w x h): 10,000 x 4,680 x 2,600 mm, weight approx.: 6,000 kg

SPECIFICATIONS: 5-axis joinery system Cross-sectional sawing unit Maximum working width in mm: 6,250 Load from mm: 11,000 Discharge from mm: 6,500 Vertical/Universal Milling Machine - Vertical Drilling Unit Horizontal Drilling Unit/Horizontal Milling Machine mm 600 Beam turning station

Description: Table: Length: 3250 mm Width: 1300 mm Pneumatics: Connection: R ½' Minimum pressure in feed: 7 Bar Air consumption: approx. 300-500 L/min Extraction: Extraction connection: O 250 mm, Height: approx. 2370 mm Total extraction capacity: min 4950 m3/H Air velocity: min 25 m/sec Pressure drop: min 2200 PA Electricity: Protection: IP53 Operating voltage: 3 400 Volt Frequency: 50/60 Hz Rated current: 31A Total connected load: 17.5 kW x-motion: 4,000 mm, y-motion: 1,670 mm, z-motion: 370 mm, path-feed rate max. X-axis: 80 m/min, path-feed rate max. Y-axis: 60 m/min, path-feed rate max. Z-axis: 20 m/min, software: Woodwop 4.5, Approx. Onsite Dimension. (l x w x h): 6450mm x2500mm x2800mm mm, weight approx.: 4,500 kg

Description: • 4-axis CNC machining centre • Serial number 471/0-502 5001956 • Total installed power approx. 18 KW • Useful working area approx. 2600 x 1150 mm • Maximum workpiece thickness approx. 100 mm • Maximum travel speed in the axes direction x-y-z-c: 75-75-30-60 m/min • C-Axis • Tool magazine with 12 positions •  ,Electrospindle: power 6 KW-max. 18000 rpm, automatic tool change, for HSK F63 tool holder • Swiveling saw unit with 1.50 KW motor • Vertical drilling spindles in X-axis direction: 10 • Vertical drilling spindles in Y-axis direction: 5 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • SIEMENS SINUMERIK numerical control • Remote control panel • 6 consoles with 14 vacuum suction in total • 6 lifting modules for heavy workpieces • BECKER HOLZHER VP100 vacuum pumpAp ...

Description: • CNC machining centre • Serial number 02030006 • Total installed power approx. 28 KW • Useful working area approx. 3000 x 1300 mm • Panel passage height 110 mm • Travelling way X-axis: 3555 mm, Y-axis: 1735 mm, Z-axis: 270 mm • Maximum travel speed in the axes direction x-y-z: 60-50-18 m/min • Tool magazine with 8 positions •  ,HSD ES919 electrospindle: power 8 KW-max. 24000 rpm, automatic tool change, for ISO 30 tool holder • 0°-90° swiveling saw unit with 1.10 KW motor, saw blade diameter 115 mm • Vertical drilling spindles in X-axis direction: 10 • Vertical drilling spindles in Y-axis direction: 10 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • Saw unit to groove in X direction • CN 12 numerical control on PC • 6 consoles with approx. 35 vacuum suction cups in t ...

Description: X= 2500 mm Y= 360 mm Z= 180 mm (depending on tool length)Approx. Onsite Dimension. (l x w x h): 2,800 x 800 x 1,400 mm, weight approx.: 750 kg ... more information

SECOND-HAND 5 AXIS CNC WORKING CENTER BACCI MOD. DOUBLE - X= 2400mm ; Y=650mm ; Z=1000 - N.2 heads type T2 - Spindle power 7.5Kw - rpm 0 - 18.000 - Max/min pieces length 150/2400mm - Loader type CSF2 - Year 2002 - s/n AB004 - Complete with manual and CE declaration  ... more information

Facilities: -Console machine with cantilever -Pneum.. Workpiece stops with double-acting cylinders -Pneum.. Assembly AIDS -additional editing fields front (4-field machining) -Handheld -C axis -Swivel sawing unit to the grooves in the X - and Y-direction -Horizontal milling unit for lock box -Plate tool changer driving with - laser positioning aid for the cleaner -autom. Central lubrication system Technical data: -Traverse path Max X: 3.259 mm -Traverse path Max Y: 1,483 mm -Maximum Z: travel 325 mm -Speed Max x: 75 m / min -Speed Max Y: 75 m / min -Maximum Z: speed 30 m / min -Workpiece thickness max: 100 mm -Spindle motor power: 7,5 kW -Main spindle speed: 1000-18000 RPM -Recording of main spindle: HSK 63F -Recording spindles: M10 with 11 mm fit -Number of vertical spindles: 14 pieces -Number of horizontal twin spindles in the X direction: 1 piece in the Y-d ...

Manufacturer: Biesse, Type: Arrow ATS BAZ 3, Year: 2003, Control: Biesse, Working range X: 3000, Working range Y-axis: 1500, C axis: no, Pendulum processing: yes, Number of milling spindles: 0, Number of tool changers: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 20, Drill vertical Y: 15, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Year :2003

Manufacturer: Weeke, Type: BHC 600 Profiline, Year: 2003, Control: Weeke, Working range X: 9.000, Working range Y-axis: 1.790, Working range Z: 370, C axis: yes, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 7.250, Min.-max. workpiece height in mm: 100, Feeding speed max m/min: 80, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, Number of tool changers: 2, Tellerwechseler: 2, Number of tools per tool-magazine: 8 + 18, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 3, Drill horizontal Y: 3, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Laser positioning: yes, Year :2003

Description: Nesting table with table size 4,750 x 1,200 mm, electrospindle with HSK63F tool holder, 12-place tool magazine TOMASSINI Automatic panel magazine with suction cup loader, storage space 8,800 x 4,000 mmserial number: AA1/013639, Approx. Onsite Dimension. (l x w x h): 13,800 x 8,000 x 4,800 mm, weight approx.: 10,000 kg