Manufacturer:
(Category: 212)
Description: serial number: 81018 power: 3.67 kWApprox. Onsite Dimension. (l x w x h): 8,500 x 1,700 x 1,000 mm, weight approx.: 3,000 kg ... more information
Description: Length 4000 mm Roll width 600 mm Working height approx. 900 mm Mobile with 4 swivel castors  ,length: 4,000 mm, width: 600 mm, Approx. Onsite Dimension. (l x w x h): 4,000 x 650 x 1,000 mm, weight approx.: 150 kg ... more information
Code: 0265 Brand: ISVE Model: ESC JUNIOR/5 - CE Standard Vacuum dryer for wood with electric heating - CE Standard Capacity m/cubic 0,7 Electric heating Machine body in stainless steel N° 5 heating plates mm 480 x 5000 x 10 - 422W/each Wood pile size mm 5000 x 480 x 400 h Installed power: N° 1 oil vacuum pump with motor Kw 0,75 - Heating elements Kw 3,75 Door opening by means of N° 2 pneumatic cylinders Electric control panel Instruction manual Overall dimensions mm 5900 x 1000 x 1200 h Weight kg 1000
Drying container WISSMATEC Continuous dryer Drying system Year of construction 2024 Drying floor with slotted bridge sheets Hydraulic moving floor Outlet opening at the rear Filling and exhaust air opening at the top Drying capacity is dependent of material Material Material moisture
Description: Max. panel width 1300 mm Max. panel length 3500 mm Max. panel stack height from the ground 1600 mm Lifting capacity 70 Kg Work capacity 20 Cycles/min Movement system suction cupsApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg ... more information
21-32-..NH Lifting table HIW3000 (new) Type 8536730 Electric – hydraulic tables. Lifting capacity: 3000 kg. Min. height: 190 mm. Lifting height: 1020 mm. Table area: 1500 x 2800 mm. Lifting speed: 30 mm/s. Made in Denmark Transport dimensions 2800x1500x300 mm Weigth: 350 kg. Price 2300 Eur (EXW Jonava, Lithuania)
20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)
21-32- RBO Two-piece roller conveyor (refurbished) Dimensions 7300x1250mm Dimensions of table no. 1: 4500x1250 mm Engine power 0.75kw Dimensions of table no. 2: 2800x1200 mm Engine power 0.75kw Max. load: 200 kg Adjustable height: 800-1150 mm Made in Denmark Weight 650 kg Transport dimensions 4600x1650x2000 mm Price 4500Eur (EXW Jonava, Lithuania) Note: It is possible to integrate machines between the conveyors (for example grinding machines)
Suction nozzle diameter: 120 mm or 100 mm; Nominal flow rate: 1900 m³/h; Spahnsack volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.1 kW; Machine height: 1000 x 500 x 1800 mm (L x W x H); Weight: 39 kg; ... more information
Suction nozzle diameter: 150 mm or 2 x 120 mm; Nominal flow rate: 3000 m³/h; Chip bag volume: 2 x 1.3 m³; Filter cleaning: manual; Motor power: 1.5 kW; Dimensions: Weight: ... more information
SPECIFICATIONS Inlet opening mm: 1000 x 720 Installed capacity KW: 18.5 Voltage: 380 volts Hourly output: 300 kg Screen diameter mm: 10 Hydraulic pump 13 cm3 - 1000 rpm Complete with control cabinet and cover ... more information
Shredding chippers for scrap wood Low-speed with moving floor Rotor width 9th 600 mm 18.5kw motor ... more information
curved conveyor beltbend 90?width carpet 500 mmtotal width 700 mmmin/max height 890/990 mmlength inner size 2800 mmengine 0.55 kW ... more information
hydraulische lifting tabledimensions of the table (single): 1100 x 1450 mmheight min/max: 400 mm / 2000 mmmaximum charge: 1000 kg ... more information
Workpiece dimensions up to approx. 5 m. length, 250 mm widthSliding blocks for possible loading with singulatorTransverse transport with 5 parallel driven belts, approx. 1.5 m in length, motor 0.37 kW Intermediate distance x 1m25 x 0m80 x 0m80 x 1m00 x4 perpendicular stop rollers4 non-driven feed rollers1 Interroll driven feed roller, built-in motor 0.37 kW, speed 0.20 m/sWorking height 70 cmElectrical cabinet not included
SPECIFICATIONS: Flow rate m3/h: 3,500 Number of bags: 3 - Ø 470 mm Number of filter bags: 24 - Ø 230 mm, height 2000 mm Installed capacity: KW 4.0 ... more information
Extraction system Venti-Oelde Year: 1995 Filter flow rate 42000 m3/h Ventilators: 1 x 30 KW / 24,000 m3/h 1 x 15 KW / 5000 m3/h Trough Conveyor + Fan Return air ... more information
Suction nozzle diameter: 200mm; Nominal flow rate: 2780 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 1580 pa; Filter area: 13 m²; Filter cleaning: pneumatic; Motor power: 3 kW; Machine length: 2000 mm; Machine width: 800 mm; Machine height: 2200 mm; Weight: 240; The dust extractor is suitable for vacuuming dry wood dust and dry wood chips at individual dust sources. This also appliesfor oak and beech wood dust. Furthermore, metallic, ceramic, organic dusts of dust explosion class St1 and St2can be extracted.If the dust extractor is properly connected to a woodworking machine with a dust source (e.g. circular saw, milling machine, planer, belt sander) and operated in accordance with the regulations", the necessary extraction performance and separation qualityâ is always guaranteed.When vacuuming a “dust-tested†woodworking mach ...
Gebr. 1-Bag Suction FIELDS F3B YOC 1993 Motor power 2.2 kW (380V) Rated current: 4.3 A mobile Extraction connection: 120 + 80 mm (ideal for sliding table saw) The suction was tightly clamped. There is no on/off switch Dimensions: L 115 cm W: 55 cm H: 210 cm Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.