peripheral equipment (e.g. heating, conveying, drying) used for sale

compressor + dryer TC 36Motor 15 kW, 3000 rpmPressure: 10 barcapacity: 2.18 m?/min ... more information

Strip stacking KUKA industrial robot with device / gripper arm for stacking strips Model robot: KUKA KR 150-2 Construction date: 2007  ... more information

Suction nozzle diameter: 1 x 200, 3 x 100mm; Nominal flow rate: 1760 m³/h; Residual dust content: 0.1 mg/m³; Chip collection volume: 240l; Filter cleaning: motoric; Motor power: 3 kW; Noise level: 78dB(A); Machine length: 1340 mm; Machine width: 900 mm; Machine height: 2170 mm; Weight: 178 kg; Clean exhaust air by separating the dust in the cyclone separator and cartridge filter Effective cartridge filter with large filter area, easy to remove for cleaning or changing Automatic filter cleaning for consistently high extraction performance Includes remote control and timer function to switch the suction on and off sight glass for checking the fill level in the container Easy emptying of the mobile filling tank

Suction nozzle diameter: 260mm; Nominal flow rate: 7700 m³/h; Bag volume: 2 x 290 l; Filter cleaning: manual; Engine power: 4.8 kW; Dimensions: 1900 x 670 x 2800 mm (L x W x H); Weight: 88 kg; For milling, planing and sawdust (not suitable for dust)180Â rotatable extraction unit allows extraction from below or aboveStable fan wheel made of metalStandard with high-quality chassis for better stability and easy manoeuvringquick-release locks for filter and chip bagfine filter bag double-woven

Suction nozzle diameter: 200 mm / 2 x 100 mm; Nominal flow rate: 1900 m³/h; Spahnsack volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.5 kW; Machine height: 1000 x 500 x 2100 mm (L x W x H); Weight: 39 kg; For milling, planing and sawdust (not suitable for dust)180Â rotatable extraction unit allows extraction from below or aboveStable fan wheel made of metalStandard with high-quality chassis for better stability and easy manoeuvringquick-release fasteners for filter and chip bagfine filter bag double-woven

Suction nozzle diameter: 160mm; Nominal flow rate: 1300 m³/h; Bucket bag volume: 2 x 175 l; Filter cleaning: manual; Motor power: 2.2 kW; Dimensions: 1817 x 578 x 2115 mm (L x W x H); Weight: 74 kg; Universally applicable also for plastic, metal, glass, polystyrene, paper and the likeParticularly robust constructionhousing made of galvanized sheet steelchip barrels are powder-coatedpaddle wheel fan for increased suction powerSignificantly reduced dust content due to double-woven fine filter bag extractors correspond to dust class LBasic units are pre-assembled in modular designOnly short installation times for large systemsTop price-performance ratioShort installation times due to modular designSCOPE OF DELIVERYSystem body with mounted fan unit1 - 6 chip bagsASA 11 - ASA 21 Extraction unit with plastic impellerASA 31 - ASA 61 Extraction unit with metal impellerstar-delta switch  ...

Demag Traverse Total length: 5.5 meters Gauge: 5.0 Meter Stroke: 250 KG  ... more information

Traverse 3 meters Stroke: 350 KG  ... more information

Forderband - Wood waste disposal Stainless steel strap, with carrier Horizontal strip: 1,500 mm Total length 3,200 mm Climbing belt: 2,600 mm at 1,600m elevation  ... more information

intake connection: 180mm; volume flow: 4200 m³/h; chip bag volume: 2 x 175 l; filter regeneration: manuell; motor power: 3,8 kW; machine diamensions: 1700 x 600 x 2400 mm (L x B x H); weight: 69 kg; The exhaust system FT 302 N impresses with its enormous suction power, high economy and the favorable price-performance ratio. Due to the possibility of connecting four machines at the same time, this model is also suitable for smaller workshops.propertiesHigh air output due to aerodynamically shaped fan made of sheet steelIdeal tool for extracting sawing, milling and wood shavingsSimultaneous connection of four machines possibleHigher ease of use thanks to generous chip bag volumeUncomplicated, fast chip bag change through tension beltIncreased mobility through standard suspensiondeliveryfilter bagchip bagdrive system

Suction nozzle diameter: 200 mm / 2 x 100 mm; Nominal flow rate: 2000 m³/h; Spahnsack volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.5 kW; Machine height: 1000 x 500 x 2100 mm (L x W x H); Weight: 39 kg; The powerful and mobile extraction unit FT 200 N improves the performance of your woodworking machines and helps you to keep the workplace free of chips and dust.During continuous operation, the powerful drive motor ensures a constant extraction performanceHigh ease of use thanks to the quick-change system of the chip bagsScratch-resistant surface thanks to high-quality powder coatingSteel fan impeller insensitive to the suction of small pieces of woodModern design and optimal price-performance ratiofilter bagchip bagdriving device

Filter ceiling Walther Year of construction: 2005 consisting of 2 parts each L 2000 mm x W 1950 mm x H 400 mm with 1 fan NZ 400 Fabr.-No. 421242.3 Year of construction. 20055 Volume flow 1100 – 7150 m³/h 230/400 V, 5.4/3.1 A, 50 Hz, 1.35 kW  ... more information

Mogentale Luigic 37KW extraction system Power 37kw Number of bags: 96 Bag diameter fi200 Dimensions 550x245x580cmH Installation dismantled and prepared for transport  ... more information

Length 6.04 m.Roll width 40 cmRoller diameter 75 mmBelt driveCenter distance of the rollers approx. 50 cmWorking height adjustable 85 - 95 cmElectrical cabinet not included ... more information

Load per column: . 0Load per cantilever: . 0Cantilever lenght: 600-1000 mmRack height: 1500 mmwidth: 4000 mmCantilever rack 4 levelsThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.about usmore than 500 machines in stockover 8500 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MOGENTALE aspirator filter model LA: - faired and galvanized type - with 3 collection bags - with internal filter bags - with engine kW 5,5 (hp 7,5) - to CE standards  ... more information

Vibrating screen, motor approx. 5kW  ... more information

ASA 4303 Aspirator Nominal volume flow: 4300m³/h Filter area 2x 2.4 m² Chip collection volume 2x 215l Suction nozzle outlet: 2x 100mm, 2x 120mm Input power 3,8kW Motor 400V 50Hz LxWxH 1700 x 600 x 2400mm Weight 69kg G&STÜ-5128433  ... more information

SAA 3001/3003 Suction sturdy construction made of solid sheet steel lower static charge compared to plastic constructions Easy to drive thanks to swivel castors Air capacity 3910m³/h Diameter on the device: 150mm Diameter at distributor: 3x 100mm 50Hz 2200W Weight 59kg G&STÜ-5922301 230 volts G&STÜ-5922303 400 volts

Conveyor belt / waste conveyor belt Length 8100mm (without climbing conveyor) The vertical conveyor is 1900mm long and conveys to a height of 1050mm. Total width 900mm Belt width approx. 520mm  ... more information