- A. ELECTRICA (1)
- A. MEIER (1)
- ABAKUS (1)
- ABAWERK (1)
- ABSOLUTE (1)
- ABUS (1)
- AC-MOTOREN (1)
- Adixen (2)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIR TOOLS (3)
- AIRFLEX (1)
- AIRMEX (1)
- AIRPEL (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALPHA LAVAL (1)
- ALTRONIC (1)
- AMADA (3)
- AME (1)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- AMP (4)
- AMPEREX (1)
- ANEST IWATA (1)
- ANGELANTONI (1)
- ANGELO VECCHIO (2)
- ANNOVI REVERBERI (1)
- ANYCUBIC (1)
- APV (1)
- ARI (1)
- ARP (1)
- ARZUFFI (1)
- ASSFALG (1)
- AT (2)
- ATEC (1)
- ATLAS COPCO (2)
- ATOM (1)
- AVK (1)
- AVOCENT (1)
- AZEA (1)
- BACHER (1)
- BAKA (2)
- BANK (1)
- BAUER (6)
- BAXTRAN (1)
- BAYERN TOOLS (3)
- BBC (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BETTER PACKAGES (1)
- BIG (7)
- BINDER (1)
- Bito (2)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BORG WARNER (1)
- BOSCH (6)
- BOSCH REXROTH (1)
- BOSCHE (1)
- BOSCHERT (2)
- BOSTITCH (1)
- BOY (1)
- BRADY (1)
- BRAZILIAN SHIPYARDS (1)
- BRINKMANN PUMPS (4)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BRÃœHL (1)
- BUDERUS (1)
- BUHLER (1)
- BURKHARDT LÖFFLER (1)
- BUSCH (1)
- BÖLLHOF (1)
- BÖSSINGER (1)
- CA-02 (1)
- CABELTE (1)
- CALAMIT (1)
- CAME (1)
- Capstone (2)
- CARL SCHENCK (1)
- CARL STAHL (2)
- CASALS (1)
- CASE TECH (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CFM (1)
- CLEAN FORCE (2)
- CLENA (4)
- CODEMA SYSTEMS (1)
- COLD JET (1)
- CONCEPT LASER (1)
- CONTEC (1)
- COYNCO (5)
- ... more
Manufacturer:
(Category: 2500)
New in: 2013
used
29.900 € Description: For the production of steel fibers for concrete Operating voltage: 3 x 480 V Frequency: 50 Hz Total connected load: 2160 kVA Total current: 2600 A Control system: SIEMENS SIMATIC HMI Incl. manual operation Incl. 15 work stations and a belt infeed device The machine has 16 high-quality drive motors from the manufacturer SIEMENS and 2 filter extraction units from the manufacturer AFSApprox. Onsite Dimension. (l x w x h): 22,000 x 6,000 x 2,700 mm, weight approx.: 30,000 kg
New in: 2013
used
Description: Serial number : UA1M482H048269740 Registration E 5301 BGW ENGINE group vag 1.9 TDI 4 cylinders turbo 100 hp 40 Km/h Contains pressure guns (see photo) Tank capacity 2000 L Sweeping width from 1300mm up to 2500m with boom Contains CE Change of ownership at buyer's expense Capacity for 2 occupants Rear camera Total / working hours according to the counter: 4082 / 1873 Mileage according to the counter: 22362 IMPORTANT: Surplex will deliver this vehicle to the buyer with a Sale Notification in DGT (Spanish traffic authorities)Approx. Onsite Dimension. (l x w x h): 6,000 x 12,700 x 2,000 mm, weight approx.: 2,690 kg
New in: 2013
used
250 € Description: Serial number MA 0186 Voltage 380 V Without further accessories and documentationApprox. Onsite Dimension. (l x w x h): 1,200 x 900 x 1,100 mm, weight approx.: 240 kg ... more information
New in: 2013
used
120 € Description: Carrying capacity: 45 kg Incl. vacuum pump from the manufacturer SCHMALZApprox. Onsite Dimension. (l x w x h): 1,500 x 500 x 500 mm, weight approx.: 80 kg ... more information
New in: 2013
used
50 € Description: Outreach approx. 1500 mm Carrying capacity 250 to 1000 kgApprox. Onsite Dimension. (l x w x h): 600 x 400 x 1,600 mm, weight approx.: 115 kg ... more information
New in: 2014
used
320 € Description: Load capacity 3200 kg, surcharge 3350 kg, each 1250 x 1250 x 1000 mmApprox. Onsite Dimension. (l x w x h): 6,500 x 2,400 x 2,500 mm, weight approx.: 1,400 kg ... more information
New in: 2014
used
1.800 € Description: Load capacity 2000 kg, load 2150 kg, each 1250 x 850 x 1000 mmApprox. Onsite Dimension. (l x w x h): 8,000 x 2,500 x 4,500 mm, weight approx.: 7,800 kg ... more information
New in: 2014
used
Hoist arm of 2,500 kg. Brand: Konecranes. Year: 2014. ... more information
New in: 2014
used
As good as new measuring frame with X-ray radiation for basis weight measurement on web fabrics up to a maximum width of 1000 mm. YOC 2014, approx. 2 Ì100 operating hours, fully functional X-Ray-Gauge in good condition, for meassuring coatings or material weights up to max. 1000 mm widht. YOC 2014, about 2 Ì100 running hours, fully functionable
New in: 2014
used
Embalming machine Embalming plant Embalming device Individual contract production for a Dutch university by the (fluid) mechanical engineering company Hellebrekers Technieken. Year of construction: 2014 Device for automatic embalming with very high quality components. Electronics from Siemens: - Sirius motor circuit breaker - Sirius Sagittarius - Sirius safety relay - Simatic S7-1200 with Simatic Touch Panel Electronics from Weidmüller: - RJ45 hub -Power supply Sensors from ifm: - electronic pressure sensor PI003A - Switching amplifier N05.. A - SM6000 electromagnetic flow sensor Pressure retaining valve from Stübbe: - DHV 718 Versa Matic tank filling pump: -E8PP5BPP9 pneumatic fluid pump Heukelom embalming pump: - TS057G. (EX version) Eldon stainless steel enclosures: - MCSS18085 - ASR0604021 - ASR0504021 ...
New in: 2014
used
GÜNTNER Heat Exchanger S-GFH with 4 fans of 900 mm each Manufacturer: Güntner Device name: S-GFH 090.2B/2x2-N(D)-F6/2P Year of Make: 2014 Number of fans: 4 pcs. Fan size: 900 mm Fan type: VT03083U Pressure Equipment Type: F/6/45/2.40/4600/A/X/S/1 Location: Erlangen ... more information
New in: 2014
used
30 € Description: Fabrication number 728 , Motor power twice 1.1 kW 230 V, 50 HzApprox. Onsite Dimension. (l x w x h): 800 x 600 x 900 mm, weight approx.: 30 kg ... more information
New in: 2014
used
50 € Description: Part number: 1716-947 Serial number: SOM27767 Load capacity: 2000 kgApprox. Onsite Dimension. (l x w x h): 1,400 x 660 x 900 mm, weight approx.: 260 kg ... more information
New in: 2014
used
This Euromac MTX Flex 6 Punching Machine was manufactured in 2014 in Italy. It has been working for only 3094 hours. It is equipped with a Euromac TopPunch control unit. This machine can operate with a punching force of 300 kN. It includes as additional equipment some drop tooling and safety light barriers, everything is brand new, never used. Also software is included. This machine like a new one.
New in: 2015
used
750 € Description: Load capacity 5000 kg, tare 131 kg, each 1680 x 1650 x 1080 mm and 1850 x 1850 x 1000 mm, mostly with plastic matsApprox. Onsite Dimension. (l x w x h): 9,000 x 1,500 x 4,000 mm, weight approx.: 3,400 kg ... more information
New in: 2015
used
950 € Description: Load capacity 3200 kg, payload 3350 kg, tare 119 kg, each 1250 x 1250 x 1000 mmApprox. Onsite Dimension. (l x w x h): 8,000 x 2,200 x 4,000 mm, weight approx.: 4,700 kg ... more information
New in: 2015
used
1.450 € Description: Load capacity 2000 kg, load 2150 kg, tare 136 kg, each 1250 x 1050 x 1000 mmApprox. Onsite Dimension. (l x w x h): 8,000 x 2,000 x 4,500 mm, weight approx.: 6,200 kg ... more information
New in: 2015
used
400 € Description: PILZ PSEN SG2 Actuator Access Control no. ,SA005775180Approx. Onsite Dimension. (l x w x h): 600 x 75 x 100 mm, weight approx.: 5 kg ... more information
New in: 2015
used
400 € Description: PILZ PSEN SG2 Actuator Access Control no. SA002924153 ,Approx. Onsite Dimension. (l x w x h): 600 x 75 x 100 mm, weight approx.: 5 kg ... more information
New in: 2015
used
50 € Description: Serial number 633302 , Nominal load 450 kgApprox. Onsite Dimension. (l x w x h): 1,100 x 1,000 x 1,000 mm, weight approx.: 140 kg ... more information