Manufacturer:
(Category: 1406)
Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm Ziruu8vxy Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm 25 pcs T-40 cleats - 396mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm ONLY AS LONG AS STOCKS LAST All our prices are net prices plus VAT. - can a ...
Aluminium angled conveyor belt incl. substructure horizontal area 1,500mm Rising area 2,100mm Angle in bend 35° Feed height: 200mm Discharge height 1,500mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm Centrally welded T-40 cleats - approx. 400mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm Accessories: Design for the suspension of the overbelt magnetic separator Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ă150x300 ...
Aluminium angular conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling horizontal area: 2,500mm Rising Area: 800mm Angle of inclination in bend: 40° Conveyor belt total length: 3,100mm Discharge height: 700mm Height of horizontal: 320mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Propulsion: Motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive etc. ready for connection, motor 2 pcs. scalloped edges 80x45mm 2-ply particularly transversely stable Usable width 370mm
Sliding belt conveyor Paal, type W GUH-1200, built in 2004, usable width 1200 mm, total length approx. 10,500 mm Specifications: Manufacturer: Paal Type W GUH-1200 Year of construction: 2004 Drive power: 4 kW Overall length: 10,500 mm Sidewall height: 550 mm Overall width: 1,630 mm Belt width: 1,200 mm Gradient: variable Total height: 1,600 mm Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
Drive drum FAM (unused) Belt width: 2000 mm RollsLength: 2200 mm, Ă 830 mm Incl.: bearing and rubber coating ... more information
Drive and deflection drums in different diameters and lengths ... more information
Stainless steel execution Infeed height: 400 mm Spout height: 1700 mm With drive motor With plastic mats chain Mobile on castors ... more information
approx. 15 pieces Transnorm conveyor curve 45 degrees - used - : Price per piece: 950.-€ (net), dismantled and loaded! Manufacturer: Transnorm Year of construction: 2010 Type: 1600-105 Nominal angle: 45 degrees Nominal briete / belt width: 800mm Belt type: KT 96 Nominal radius: 900mm SEW Engine Condition: good Available: now Location: Camp Frankenberg
Stockpile conveyor 21 m Belt width 650 mm troughed Manufacturer: Polxmair Frame made of square tubing Drive 2.2 KW Can be dismantled, everything is screwed Camp Saxony-Anhalt Price ex farm ... more information
ID3275 Shore Belt Plant/Conveyor System year approx. 1995-2000? Approx. 470 m conveyor belt system, with covers, off-road, ascending with roadway crossing, fully hot-dip galvanized, year of construction unknown - probably 1995-2000. Estimated active working time approx. 10 years. Length approx.: 470 m, intended belt width 500 mm, discharge and drive-through height approx. 5.7 m, without conveyor belt, dismantled in transportable units, discharge station with railing and walkway, drive power 18.5kW approx. 470 m land conveyor system, with covers, following the terrain, ascending with road crossing, fully hot-dip galvanized, year of construction unknown - probably 1995-2000. Estimated active service life approx. 10 years. Length approx.: 470 m, intended belt width 500 mm, discharge and drive-through height approx. 5.7 m, without conveyor belt, dismantled in transportable units, dischar ...
Webbing, conveyor belt with frequency converter Webbing No. 1 for 800,- € net Belt width : 350 mm Lifting height: 750 mm Belt lengths: 1300 mm In total we have 3 webbing straps with different lengths Webbing speed adjustable with frequency converter, Belts have been electrically tested for function. No. 1) 1 piece approx. 13000 mm length 800,- € net No. 2) 1 piece approx. 15000 mm length Price VB No. 3) 1 piece approx. 20000 mm length Price VB We are clearing our warehouse in 51688 Wipperfürth. Price reduction due to stock clearance. If all 3 belts are accepted, we can make a favorable overall offer.
Wheelbase = 9875 mm ; Belt width = 1600 mm ; Conveying speed = 0.2 m/s ; suitable for bales 1200 x 1200 x 1200 mm Drive SEW - bevel gear motor 4 kW , 3660 Nm , speed = 1464 / 10 / min Conveyor belt type EP400/3 ; Bushing conveyor chain M112 approx. 44 m ; Equipped with PE sliding strips, pull-wire emergency switches, drip oilers and speed monitors; Documentation complete
4000 m container conveyor technology Dematic, driven Used goods built in 2019, very good condition, see pictures Conveyor width: from 49 to 88 cm Roll diameter: from 5 to 8 cm Conveyor belt width: 70 cm Belt conveyors and curved conveyors in various designs. Module lengths from 100 to 450 cm available. Various inclination heights from 40 cm to 200 cm. Negotiation price: from € 90,- net ex location Depending on the purchase quantity and design Dismantling will take place from April to June 2024. Location: Northern Italy. Viewing possible by appointment. Further information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVERYTHING HAS to go! - from location to max. End of June 2024 The followi ...
500 m belt conveyor Dematic, driven Used goods built in 2019, very good condition, see pictures Conveying width: from 49 to 60 cm Lifting heights: from 80 and 150 cm Partly with sensor technology Module lengths from 100 cm to 350 cm available. Various designs and curved conveyors available. Negotiation price: from € 180,- / rm net ex location depending on the purchase quantity and design Dismantling will take place from April to June 2024. Location: Northern Italy. Viewing possible by appointment. Further information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVERYTHING HAS to go! - from location to max. End of June 2024 The following products of the plant are also available for sale: 30 ...
Transnorm conveyor belt curve not quite 180 degrees - used - : Belt curve: Price (net): 1.750.-€ Manufacturer: Transnorm Special degree number Type: 1600 – 105 Year: 2008 Outer diameter approx. 3,30m Further information can be obtained BC 074 ... more information
approx. 2 pieces Transnorm inschleuser / inclined belt conveyor - used - : Price per piece: 950.-€ (net), dismantled and loaded! Manufacturer: Transnorm Year of construction: 2010 Type: 6200-00 Nominal briete / belt width: 800mm SEW Motor Condition: good Available: as of now Location: Frankenberg Sachsen warehouse These are the two lower parts on the pallet – unfortunately there are currently no better photos.
New magnetic tape, E-or hydraulic drive, if you have questions 0049016044 44300 ... more information
currently in stock: 1 pcs. 500 mm x 6m 1 pcs. 500 mm x 10 m 1 pcs. 500 mm x 12 m it is subject to prior sale! ... more information
Belt width: approx. 600 mm Length: 7,500 mm 2.2 kW drive Inlet plates in the inlet area V-support leg Speed: 1 m/s ... more information
used conveyor belt in sturdy lattice construction Belt width 800 mm smooth belt EP630 6:3 Wheelbase approx. 38 m 22 kW electric drive Siemens Feed and discharge hoppers with stable V-support Discharge height approx. 12 m ... more information