other machinery for waste disposal and recycling used for sale

Used conveyor belt, built in 2020, few operating hours Very heavy design for recycling With very strong neodymium magnet in the upper deflection drum Reducing gear for slow conveying speed With concealed wavy edge and crossbars on the harness Large inlet hopper with adjustable slider for material height on the belt 4 m long, discharge height approx. 2.2 m (variable) Ideal, for example, for feeding material into a cable recycling plant At call

ROXON feed hopper with vibrating chute Brand: ROXON Type: MTS30/1040 Dim. Bunker : 4500 x 2000 x 1000/1800 mm. Feeding trough: length 4000 mm - width 1000 mm. Propulsion: 2 vibration motors of 1.8 kW each  ... more information

Stationary crane with pulverizer Brand pulverizer: KRUPP Electric water propulsion  ... more information

Goose neck shaped conveyor belt Blueprint 3.541 mm. on floor mm. 2.150 in horizontal + 1.350 mm. diagonal Angle 45° 1.166 mm discharging point Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end Discharging outlet on bottom for material Separate discharging outlet for extracted ferrous material, The machine is as new, 200 worked hours

Manufacturer LINDNER Type Chain Extraction Belt 9.600 mm long With central chain transport and paddles Flat type on supports Constructed in sturdy steel 5 kw motor + gearbox Construction year 2013 500 mm.outer width 400 mm.inside width ... more information

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination), The water can be mechanically filtered with a water screening system (available separately), electric cabinet, Users manuals , drawings, CE compliance

Conveyor belt Kleemann Brand: Kleemann A.A length = 50,000 mm. Strap width: 1200 mm. Drive: 30 kW slip-on gearbox.  ... more information

Steinert Electric Magnet Strap Brand: Steinert 2 pieces: length frame A.A.= 1800 mm Strap width : 800 mm Drive: 1.5 kW clip-on gearbox Block : 1000 x 750 x 400mm Inclusive rectifiers. 1 piece: length frame A.A.= 2200 mm Belt width : 1000 mm Drive: 2.2 kW slip-on gearbox Block : 1400 x 950 x 450mm Inclusive rectifiers. 1 piece: length frame A.A.= 3300 mm Belt width : 1900 mm Drive: 4 kW slip-on gearbox Block : 2400 x 1800 x 600mm Inclusive rectifiers.

Conveyor belt Kleemann Brand: Kleemann A.A length = 7200 mm. Strap width: 1200 mm. Drive: 5.5 kW 2 pieces in stock.  ... more information

Conveyor belt Kleemann Brand: Kleemann A.A length = 18000 mm. Strap width: 800 mm. Drive: 11 kW slip-on gearbox.  ... more information

Conveyor belt Kleemann Brand: Kleemann A.A length = 6000 mm. Belt width: 1600 mm. Drive: 11 kW slip-on gearbox.  ... more information

Conveyor belt Kleemann Brand: Kleemann A.A length = 30,500 mm. Strap width: 1200 mm. Drive: 2 slip-on gearboxes of 22 kW each.  ... more information

Dosing conveyor belt Kleemann Brand: Kleemann A.A length = 8000 mm. Strap width: 800 mm. Drive: 7.5 kW slip-on gearbox.  ... more information

Conveyor belt Kleemann Brand: Kleemann 2 pieces in stock: A.A length = 14500 mm. Belt width: 1800 mm. Drive: 11 kW slip-on gearbox. A.A length = 14500 mm. Strap width: 1200 mm. Propulsion: 22 kW slip-on gearbox.  ... more information

Conveyor belt Kleemann Brand: Kleemann A.A length = 8000 mm. Strap width: 800 mm. Drive: 7.5 kW slip-on gearbox.  ... more information

Windshifter Westeria Brand: Westeria Type: WSD 2000 Roll width: 2000mm Available on stock: 2 pieces. Incl.: discharge belt with length 11600mm A.A., Belt width 1600mm, Drive: 7.5 kW Available on stock: 2 pieces.  ... more information

Made in Germany Electrostatic Suction capacity: max 1800 m³/h, Fan power free suction 2400 m³/h, Engine power: 0.75 kW, (Siemens), Dimensions: L 1,765 x W 670 x H 700 mm Weight: 130 kg, Operating voltage: 400 VAC, 50 Hz, Power consumption, 1.85 Va  ... more information

Kleemann feed hopper with vibrating chute Brand: Kleemann Dim. bunker : 5800 x 2900 x 900 mm Feed trough: length 4200 mm - width 1500/1300 mm Propulsion: 18.5 kW electric motor.  ... more information

Goudsmit Electric Magnet Strap Dim. conveyor belt: A.A.= 2700 mm Belt width : 900 mm Drive: 2.2 kW slip-on gearbox Dim. Block : 1700 x 800 x 400mm Power requirement: 3 kW  ... more information

Recycling machine trade AGICOM- Pedergnana OG, Technical data of the alligator shears S 900: Knife length: 900 mm Max. knife opening: approx. 510 mm Main drive: 22 kW Overall dimensions: L 4.2 x W 1.2 x H 1.7 m Total weight: 7.5 tons Manafacture: Lefort Overhauled used machine; Machine ready for use! On hand