Manufacturer:
(Category: 505)
The JMC 407 is the top seller among our alligator claws. It is cost-effective, has sufficient knife length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, piping, motors, gearbox housings. The scissors are also often used for cleaning scrap metals or cutting vehicle radiators. The machine is equipped with a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. By means of a foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted by means of simple clamping screws. The scissors are from our demonstration pool and can be viewed or tested.
The cable peeling machine "MASTER 140" is suitable for peeling XLPE cables, underground cables, cables with steel armouring, cables with aluminium and lead armouring, but also for processing PVC and rubber cables. In contrast to other underground cable machines, which usually only have one blade, the "Master 140" cuts with two blades at the same time – this saves you an additional pass if necessary. To push the cable halves apart, expansion wedges can be screwed on. Both blades can be individually adjusted to the desired cutting depth. Due to concave tension rollers, the cables are less compressed at the cut surfaces, cores from (lead) sheathed cables can be removed more easily. Specifications: Working range/cable diameter: 30 mm to 150 mm Pulling speed: max. 12 m/min Motor: 2x 3.0 kW - 400 Volt Dimensions (LxWxH): 1.8 x 1.0 x 1.2 m Weight: approx. 660 kg
For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.
Small floor filter, which can be used, for example, for extracted air from separators in cable recycling. The filter is without its own fan, so it works purely passively. The filter and the collection bags have a diameter of 500 mm. ... more information
Small dosing accumulator with screw conveyor for cable recycling plants, wood chips, etc. Capacity approx. 650 litres or 400 - 500 kg of pre-shredded old cable Adjustable conveying speed with frequency converter/inverter 0 - 16 rpm Drive only 0.55 kW with reduction gear Discharge height approx. 750 mm Dimensions (LxWxH): 2,200 mm x 800 mm x 1,800 mm Mobile via large heavy-duty castors with brakes
Simple unit for transporting plastic granules, such as PVC from cable recycling. Suction through hopper and 100 mm flex tube. Forwarding by fan/fan in rotary valve for dust removal. By extending the pipes, the unit can also be located further away from the feeding point. The big bags are suspended by height-adjustable chain hooks. The unit consisting of a rotary valve and filter is also adjustable in height. Of course, boxes can also be used instead of big bags. The machine can be inspected and tested with us.
Used conveyor belt, built in 2020, few operating hours Very heavy design for recycling With very strong neodymium magnet in the upper deflection drum Reducing gear for slow conveying speed With concealed wavy edge and crossbars on the harness Large inlet hopper with adjustable slider for material height on the belt 4 m long, discharge height approx. 2.2 m (variable) Ideal, for example, for feeding material into a cable recycling plant At call
Used overband magnet with new conveyor belt, new geared motor and new bearings. Length, strap 1,200 mm, magnet 700 mm Strap: width 300 mm, 5 studs Drive: 400V, 0.18 kW Aluminum frame with 4 eyebolts for suspension. ... more information
Very good machine from our demonstration pool. Few hours of operation or signs of use. The peeling machine is suitable for XLPE cables, underground cables, cables with steel armouring, cables with aluminium and lead armouring, but also for processing PVC and rubber cables. With this machine, two cuts can be made at the same time in one operation, so that the processing can be twice as fast as with other models. Technical data: Working range/cable diameter: 30 mm to 150 mm Pulling speed: max. 12 m/min Motor: 2x 3.0 kW - 400 volts Dimensions (LxWxH): 1.8 x 1.0 x 1.2 m Weight: approx. 660 kg
The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient knife length and enough power for most tasks in metal recycling. It is suitable for cutting many materials, such as profiles, pipelines, motors, transmission housings. The scissors are also frequently used for cleaning scrap metals or for cutting vehicle coolers. The machine has a control without electronics and a manually adjustable holder, which also acts as a protective hood. The scissors can be used by foot pedal in single or continuous operation. The opening width is adjustment via simple clamping screws.
Heavy peeling machine from also for thick cables up to approx. 110 mm diameter. Cable stripping machine for PVC and lightly reinforced cables. Easy adjustment of the knives by handwheel. Cables are cut from both sides at the same time, so that the remittation drops slightly. Knife individually adjustable by spindle for different strength swelling. Double spindle for precise adjustment of the cable thickness. Two separate 1.5 kW motors for a lot of power when pulling through the cables
Small vibrating sieve with two decks for three fractions. The diameter of the sieve inserts is 400 mm. This includes a bet with balls that keep the screen insert clean from below. This is suitable, for example, for the screening/classification/quality assurance of copper granules (contamination by plastics or aluminium are sifted) or for the re-treatment of plastic granules from the cable recycling. The sieve is located in our demo pool and is little needed.
Demo machine from demonstration pool Enormously versatile cable slot machine thanks to individually adjustable, standing cutting knives. Cables are cut as standard by two knives penetrating the insulation on the side. The series was significantly improved in terms of safety in 2014 and now features a short feeder for thin cables and a long feeder for thick cables. The change is made in seconds by means of a rotary mechanism. The simplicity in the construction and the construction with two powerful, synchronously running rollers is left. With coarse gearing, even thicker cables are safely fed into the knives and transported further after the cutting process for removal. Blunt knives can be easily and cost-effectively sharpened with a standard grinding machine.
bulging conveyor belt, sturdy construction, studded belt, belt width approx. 800mm, wheelbase approx. 14.60m. The construction is separated in the middle for transport. The conveyor belt is not disconnected. Sale takes place without any warranty. Loading is possible ... more information
mechanical dryer drive 90 kW BRAND NEW MACHINE centrifugaldryer for surface drying of the material fraction primarily for film flakes, granulate from PET bottles and other rigid types of plastics. ... more information
- Complete system - incl. conveyor belt width 800 mm - Incl. discharge hood with separating parting - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015 ... more information
- Complete system - incl. conveyor belt width 2400 mm with NEW CONVEYOR BELT - Incl. discharge hood with separating parting - INCL. BLOWER FOR FOIL SORTING - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015
small tipping container, width 63.5, height 98.5, length 125.0 cm for forklifts with fork width 11.5 cm ... more information
Environmental technology Kreisel Krauschwitz - Rotary valve Product name: Rotary valve Manufacturer: Umwelttechnik Kreisel Krauschwitz Type: ANG 200-11-12 Z (RF47) Year of construction: 2006 Machine number: 61614 Condition: used Inlet opening: 200 x 200 mm Outlet opening: 200 x 200 mm Cell depth: 60 mm Cell width: 200 mm Cell wall: 8 mm Number of cells: 8 Engine: SEW-EURODRIVE Type: RF47 DT71D4/TF RPM: 1380/12 Power: 0.37 kW Voltage: 230/400 V Protection class: IP55 Machine size: 850mm x 300mm x 300mm (L x W x H) Transport dimensions: 1,200mm x 800mm x 450mm (L x W x H) on pallet Number of packaging units: 1 Weight: approx. 100 kg on disposable pallet The rotary valve was completely refurbished, checked and tested for function in our company. Price: 1.390,00 € (VB) plus VAT from location Grunow (Brandenburg) (Subject to changes and errors regar ...
HOLZKRAFT raw air extraction system ASA 1901 Product name: Raw air extraction system ASA 1901 Manufacturer: Holzkraft Item number: 5128191 Condition: As good as new technical details: • Filter area: 1.92 sqm • Rated power: 1,900 cbm/h • Chip collection volume: 110 l • Chip bag: PVC d= 414 mm Length x 1,100 mm Width/depth approx. 650 mm • Diameter intake manifold on the device: 203 mm • Diameter intake manifold at the distributor: 1 x 120 mm, 1 x 100 mm • Height filter cartridge: 2,100 mm • Sound pressure level: 85.7 dB(A) Hints: • The system is suitable for milling, planing and sawdust, but not for dust! • By rotating the intake unit by 180°, the suction direction can be done from above or below. This requires light conversion work. Engine data: • Motor power: 1.5 kW • Speed: 2 ...