other machinery for waste disposal and recycling used for sale

Used overband magnet with new conveyor belt, new geared motor and new bearings. Length, strap 1,200 mm, magnet 700 mm Strap: width 300 mm, 5 studs Drive: 400V, 0.18 kW Aluminum frame with 4 eyebolts for suspension.  ... more information

Very good machine from our demonstration pool. Few hours of operation or signs of use. The peeling machine is suitable for XLPE cables, underground cables, cables with steel armouring, cables with aluminium and lead armouring, but also for processing PVC and rubber cables. With this machine, two cuts can be made at the same time in one operation, so that the processing can be twice as fast as with other models. Technical data: Working range/cable diameter: 30 mm to 150 mm Pulling speed: max. 12 m/min Motor: 2x 3.0 kW - 400 volts Dimensions (LxWxH): 1.8 x 1.0 x 1.2 m Weight: approx. 660 kg

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient knife length and enough power for most tasks in metal recycling. It is suitable for cutting many materials, such as profiles, pipelines, motors, transmission housings. The scissors are also frequently used for cleaning scrap metals or for cutting vehicle coolers. The machine has a control without electronics and a manually adjustable holder, which also acts as a protective hood. The scissors can be used by foot pedal in single or continuous operation. The opening width is adjustment via simple clamping screws.

Heavy peeling machine from also for thick cables up to approx. 110 mm diameter. Cable stripping machine for PVC and lightly reinforced cables. Easy adjustment of the knives by handwheel. Cables are cut from both sides at the same time, so that the remittation drops slightly. Knife individually adjustable by spindle for different strength swelling. Double spindle for precise adjustment of the cable thickness. Two separate 1.5 kW motors for a lot of power when pulling through the cables

Small vibrating sieve with two decks for three fractions. The diameter of the sieve inserts is 400 mm. This includes a bet with balls that keep the screen insert clean from below. This is suitable, for example, for the screening/classification/quality assurance of copper granules (contamination by plastics or aluminium are sifted) or for the re-treatment of plastic granules from the cable recycling. The sieve is located in our demo pool and is little needed.

Demo machine from demonstration pool Enormously versatile cable slot machine thanks to individually adjustable, standing cutting knives. Cables are cut as standard by two knives penetrating the insulation on the side. The series was significantly improved in terms of safety in 2014 and now features a short feeder for thin cables and a long feeder for thick cables. The change is made in seconds by means of a rotary mechanism. The simplicity in the construction and the construction with two powerful, synchronously running rollers is left. With coarse gearing, even thicker cables are safely fed into the knives and transported further after the cutting process for removal. Blunt knives can be easily and cost-effectively sharpened with a standard grinding machine.

bulging conveyor belt, sturdy construction, studded belt, belt width approx. 800mm, wheelbase approx. 14.60m. The construction is separated in the middle for transport. The conveyor belt is not disconnected. Sale takes place without any warranty. Loading is possible  ... more information

mechanical dryer drive 90 kW BRAND NEW MACHINE centrifugaldryer for surface drying of the material fraction primarily for film flakes, granulate from PET bottles and other rigid types of plastics.  ... more information

- Complete system - incl. conveyor belt width 800 mm - Incl. discharge hood with separating parting - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015  ... more information

- Complete system - incl. conveyor belt width 2400 mm with NEW CONVEYOR BELT - Incl. discharge hood with separating parting - INCL. BLOWER FOR FOIL SORTING - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015

small tipping container, width 63.5, height 98.5, length 125.0 cm for forklifts with fork width 11.5 cm  ... more information

Environmental technology Kreisel Krauschwitz - Rotary valve Product name: Rotary valve Manufacturer: Umwelttechnik Kreisel Krauschwitz Type: ANG 200-11-12 Z (RF47) Year of construction: 2006 Machine number: 61614 Condition: used Inlet opening: 200 x 200 mm Outlet opening: 200 x 200 mm Cell depth: 60 mm Cell width: 200 mm Cell wall: 8 mm Number of cells: 8 Engine: SEW-EURODRIVE Type: RF47 DT71D4/TF RPM: 1380/12 Power: 0.37 kW Voltage: 230/400 V Protection class: IP55 Machine size: 850mm x 300mm x 300mm (L x W x H) Transport dimensions: 1,200mm x 800mm x 450mm (L x W x H) on pallet Number of packaging units: 1 Weight: approx. 100 kg on disposable pallet The rotary valve was completely refurbished, checked and tested for function in our company. Price: 1.390,00 € (VB) plus VAT from location Grunow (Brandenburg) (Subject to changes and errors regar ...

HOLZKRAFT raw air extraction system ASA 1901 Product name: Raw air extraction system ASA 1901 Manufacturer: Holzkraft Item number: 5128191 Condition: As good as new technical details: • Filter area: 1.92 sqm • Rated power: 1,900 cbm/h • Chip collection volume: 110 l • Chip bag: PVC d= 414 mm Length x 1,100 mm Width/depth approx. 650 mm • Diameter intake manifold on the device: 203 mm • Diameter intake manifold at the distributor: 1 x 120 mm, 1 x 100 mm • Height filter cartridge: 2,100 mm • Sound pressure level: 85.7 dB(A) Hints: • The system is suitable for milling, planing and sawdust, but not for dust! • By rotating the intake unit by 180°, the suction direction can be done from above or below. This requires light conversion work. Engine data: • Motor power: 1.5 kW • Speed: 2 ...

specifications: - Air output: 6,000 m³/h - Pressing PA max: 500 Pa - Diameter pressure connection: 350 mm - Filter area: approx. 3.25 m² - Working surface (W x H): 2,080 x 1,930 mm - Area baffle: 1,800 x 1,800 mm - Dimensions of adjustable baffle plates (li + re): each 1,800 x 440 mm Engine data: - Power: 1.8 kW - Voltage: 380 V (star-delta) - Current: 3.8 A - Frequency: 50 Hz - Speed: 1,415 rpm - Transport dimensions (H x W x D): 2,500 x 2,000 x 800 mm (with pallet and mounted baffle plate and nozzles) - Weight: approx. 300 kg - Number of packaging units: 1 piece (on disposable pallet) The extraction wall was completely refurbished in our house and the fan was checked for its correct function. The extraction wall was completely cleaned and provided with new filter mats. Hint: Pipe components required for on-site operation can be requested from us. (Cha ...

used stockpile conveyor, height adjustable, rubber-tyred chassis, wheelbase approx. 15m  ... more information

SCRAP CHOPPER The Model CE450 DDX boasts power alongside a dual driven feedworks. Driving both feed rolls on the chopper allows the unit to process scrap quickly and efficiently. The Model CE450 DDX is Sweed’s chopper of choice for companies processing large volumes of scrap plastic or PET strapping. This chopper is extremely versatile and can be customized for inline automated production applications requiring tension control and custom scrap lengths. The Model CE450 DDX is designed to fit on several Sweed stands that can accommodate a variety of scrap collection containers. Custom stands and additional safety upgrades are also available. Material Reference The recommended model of scrap chopper is determined by scrap size, scrap volume, and requested custom features. The following are materials commonly processed through the CE450 DDX. Please consult a Sweed representative to ...

Detector detector metaldetector metal EZ-TEC type 9000 RD Voltage: 230/240V AC Amperage 315mA 1 used and 1 new  ... more information

Mobile Husmann lifting tipping system for emptying containers and boxes.  ... more information

Zig Zag Air Sifter Sizes/ wides from 200mm - 1800mm Precondition for the separation are differences in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm – 40mm, (bigger particles are possible with a special design) We are the manufacturers of these plants and we build Zig Zag Sifter Plants in different sizes. In order to make you a definite offer we need to know some points: 1. What material you want to separate? 2. Grain-size of the material? 3. Bulk weight kg/liter of your material. 4. We have technical center at our house, where we can test your material.

To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are choiceable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.