Manufacturer:
(Category: 505)
Technical data single-deck ballistic separator for three separation fractions:Manufacturer Lubo Screening & Recycling Systems B.V.Type Elliptical 10EBB05Year of construction 2015Screening area 12.5 m², consisting of 6 screen paddles 400 x 5000 mm Weight 7,100 kgNote on the separation process:The Lubo Elliptical is a state-of-the-art ballistic separator. It separates the material stream into three fractions, heavier 3D fractions such as tin cans or PET bottles, lighter 2D fractions and screened fines. This ensures high separation quality for various waste streams such as mixed waste, packaging, mixed paper, film and cans.Condition of the machine:The Elliptical 10EBB05 ballistic separator is still in use at a large recycling company separating mixed waste until the 18th calendar week, when it will be replaced by a larger machine with a higher throughput capacity. The machine is in a well- ...
Max. bale dimensions: 700x490x730mm, bale weight: 40-60kg, length: 710mm, width: 1000mm, height: 1920mm, weight: 550kg. ... more information
Bale dimensions: 800x800mm, length: 8000mm, width: 6000mm, height: 5000mm. ... more information
There are two shredders available, blade width: 3x 46mm, power: 30kW, machine 2 has a cracked casing and needs overhauling. ... more information
Motor power: 55kW, length: 14,900mm, width: 6800mm, height: 4000mm, operational hours counter: 30h. ... more information
With conveyor belt, blower, shredder, screw, drum and screen. ... more information
Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h. ... more information
Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure. ... more information
Min. output: 20t/h, wear plates: 13x Pos. 3, 14x Pos. 9, 20x 325x250mm, 28x 120x160mm, 18x 250x250mm, 23x 150x380mm, with blow bars, jaws, metering channel and 4x set screws with collar. ... more information
Pressing force: 785kN, opening width: 1100mm, bale weight: 475-750kg, bale dimensions: 1100x750mm, max. output: 30t/h, motor power: 45kW, operational hours counter: 59,550h, with documentation, an on-site inspection is possible, the machine is located in Slovakia. ... more information
The process engineering focus of the Doppstadt screw press is not on extracting as much biogas from the feed material as possible, but rather on providing a clean biogas substrate with a single machine, that requires no further treatment. Working chamber of the press screw diameter/length: 500mm/2000mm. Pressing baskets: round sieve holes with 8mm diameter. Feed hopper: volume: 5m³, feed height: 2900mm. Foldable one-piece rear belt: dimensions X/Y/Z: 5000mm/1200mm/3000mm with smooth belt. Eccentric screw pump for filtrate: max. delivery head/delivery length: 10m/15m. Throughput: 8-12t/h, liquid phase TS: 16%-23%. The machine is in mint condition with only 300 hours of operation. Including feed hopper DM 205, folding one-piece rear belt and eccentric screw pump for filtrate. Documentation available. On-site inspection is possible.
Qn: 47l/min, Qv: 2750l/min, Hn: 75mm²/s, Δp: 5bar, P: 1.5kW. ... more information
Conveyor belt Svedala Brand: Svedala Sv8: A.A length = 7,800 mm, belt width: 1500 mm Propulsion: Hydraulic motor Sv9: A.A length = 7,600 mm, belt width: 1000 mm Propulsion: 3 kW drum motor ... more information
Conveyor belt Svedala Brand: Svedala Sv5: A.A length = 6,000 mm, belt width: 650 mm Propulsion: Hydraulic motor Sv6: A.A length = 7,000 mm, belt width: 650 mm Drive: 4 kW slip-on gearbox Sv7: A.A length = 6,000 mm, belt width: 800 mm Drive: 4 kW slip-on gearbox ... more information
Used roll packer Manufacturer: Bergmann Type: RP 7801-69 Year of manufacture: unknown specifications: Weight: 3,100 kg Power: 5.5 kW, 12.5 A Pmax.: 220 bar Noise level: 69 dB(A) The hydraulic motor has recently been renewed. Technical description: The rolling roller for compaction of waste and garbage is an invention from BERGMANN. For 30 years, this technology has been in continuous use worldwide – at recycling centres, in wholesale markets, industrial plants and elsewhere. Clean, highly efficient and extremely low-maintenance! The principle is simple: a heavy-duty compaction roller with hydraulic self-propulsion is guided over an articulated mast in the container and captures, tears and compacts the Einfüllgut.Im dialogue with its customers, BERGMANN has repeatedly expanded its machine family of roll packers: from roll packers, which have its fixed ...
Overview of the equipment of a sorting plant, year of construction 2009, extension 2015, with a sorting capacity of 25,000 t/yearFor sale is a complete sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components:1 piece feeding / dosing bunker with hydraulic moving floor and dosing drum, manufacturer Hartner, type Storage HAT1 piece 3-deck ballistic separator, manufacturer Hartner, type Paper Sort2 pieces overband magnetic separators, manufacturer IFE, type MEQL 1401 S-PS2 pieces cascade screens (vibrating screens), manufacturer IFE, type SM 2400 x 5000 F - UW302 pieces TiTech Autosort, manufacturer TOMRA Sorting GmbH, type TITECH AutoSort 4 (NIR1-VIS) (S-2800) (X-L), incl. accelerating belts1 piece sorting cabin with filter system, air-conditioned (heated), with 3 sorting belts and 10 sorting stations1 piece ventilation sy ...
UK Power Generators is selling Waste Heat Recovery Unit. We are leading supplier of Industrial Equipment for Power Plants and accessories. Contact us today if you are interested in the above listed product. For more details and information; contact us at Infoukpowergeneratorsltd ... more information