subcategories
(3rd category level)
Manufacturer:
(Category: 706)
Overview The filler and capper block was made by Sasib/Sarcmi in 2000. Techn. Data Output: approx.: 15,000 bph Neck: Alaska 3 start Number of rinser stations: 40 Number of filling stations: 70 Number of capping stations: 10 Scope of delivery Basement + Capping Turret Filling Carousel Mechanical AROL cap elevator, year 2000 Electrical Cabinet Pallets with equipment PROMEC Evolution 2R 40.110 Rinser, 40 grippers Filler, 70 valves AROL mechanical Capper EURO ``PK``, 10 heads
Overview The blow moulder was built in 1999 by French manufacturer SIDEL. The machine is in very good working condition, still in production and can be viewed in person. Techn. Details Current capacity: 23.400 bph at 1.25L Working hours: 40.000                 Number of moulds: 18    Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881 Type of preforms: with recycled PET resin Machine was regularly maintained    Machine equipped with:                   Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control
Overview The loader was manufactured in 2000 by the German company Kettner. It is located at a German mineral fountain and is part of a plant that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The loader is still mounted and electrically connected. Techn. data 3-axis loader Capacity: up to 68 pallets/hour Control Siemens S5 With automatic central lubrication Accessories Pack transport Pallet transport Grouping table Layer pad inserter Intermediate layer magazine Empty pallet magazine Â
Overview The high vacuum solo filling machine was manufactured in 2006 by the Italian company Ocim. The machine is till now still in use in a factory in the Netherlands. As the production volume is increasing the machinery is replaced by machines with higher capacity. Consequently the machine will be available earliest in October 2022, when the new machines are installed. The machine is well maintained and in good condition. There are various bottle formats possible. Bottle format parts and technical documentation are included in the scope of supply. The machine is also suitable for oil. Tech Specs: Capacity: 2500 b/h at a Volume of 0,75 l/b 20 filling valves Formats: 0,25l; 0,50l; 0,75l; 1,0l; 1,75l Electronic valve pre-expulsion Working direction: clockwise
Overview The machine for bottle cleaning was manufactured in 1994 by the German manufacturer GM Gera. The machine was in use at a dairy until last and is in a good condition. Technical details Capacity: 15.000 bph Bottle cells per row: 17 0,25l, 0,5l, 1,0l milk bottle, 500g yoghurt jar Bottle diameter Min. 60 mm Max. 90 mm Bottle height Min. 120 mm Max. 260 mm All basins made of stainless steel Control: Siemens S7
Overview The crater & decrater Linapac II was built in 2012 by German manufacturer Krones. The column was replaced by a new one in April 2021. Techn. Details Formats 3x4 (0,75 lt – 1,00 lt) 4x5 (0,5 lt) 6x12 picking heads Automatic format change ... more information
Overview This shrink packer from the Italian manufacturer Zambrelli was built in 2006. This machine is available because the owner increased the production capacities. The machine was running until it was professionally dismantled from the line and will be stored soon. The machine is running in different formats which are easy and quick to change. Technical Details Capacity: 30 packs per minute (with 3x2 formation) Type: Only film / Carton + film / Tray + film Bottles: PET 0.25L ; 0.33L ; 0.5L ; 1L Machine weigth: 4500kg Length: 15130 mm Width: 1694 mm Height: 2350mm Machine for packaging in heat-retractable material, continuous movement, no sealers, latest generation for medium and high production levels. Maximum speed depending on machine model type of product and bundle tube formed. Quick & easy format change All manuals available and will be delivered with machine
Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018. List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP ball ...
Overview This Labeling Machine was built in 2005 by Gernep. It was in operation in a fruit juice plant in Germany till 01/2022. In this company it was only used in single-shift operation for about 100 days a year, which is why the condition of the machine is still very good. Tech Specs: Capacity: 6,000 bph at 1L bottles Number of aggregates: 2 Accessories: Formats for 1.0 l VdF glass bottles, 0.7 l VdF, 0.2 l glass bottles goiter neck Various spare parts included
Overview The OPP labeller Krones Contiroll HS was manufactured by Krones in 2014. It was used in a dairy plant in the Philippines. It was used for cans, filled with milk. The cans had the dimension 209mm x 208mm. As the machine became redundant, it is for sale now. The machine is already disassembled, but can be inspected. Full technical information is available. Tech Specs: Capacity: 36,000 uph Control: Siemens S7 Number of aggregates: one Container dimension: 209mm x 208mm Dimensions: Height: 2450mm Length: 2800mm Width: 3230mm
Overview This brewhouse from Hungarian manufacturer ZIP was built in 2014. It has been well maintained with regular servicing and is in outstanding condition. It has been owned by a craft lager brewery in the UK who are now upgrading due to expansion. All the equipment is still in operation and can be viewed in person. Scope of delivery Brewhouse, 10 HL | Zip Technologies | 2014 HLT, 1650L | Zip Technologies | 2014 Whirlpool, 10HL | Zip Technologies | 2014 CIP, 150L x 2 | Zip Technologies | 2014 Electric Steam Generator, 120A | Zip Technologies | 2014 DPV (Dual Purpose Vessel) x 3, 13HL | Zip Technologies | 2014 DPV, 10HL | Brew Tek Mill 2 Roll + Premasher | Zip Technologies | 2014 Chiller, 15KW | 1000L Glycol + 1000L Chilled Water | Zip Technologies | 2014 Lagering Tanks x 2, 10HL | Bier Drive | 1984 Keg Washer/Filler | Zip Technologies | 2014
Overview For sale is a canning line for filling beer and other carbonated beverages, such as CSD or Sparkling Wine. The line is still assembled and can be inspected. As production volumes have increased, the line is too small with its current output and is being replacing it with a larger line. Standard 330ml and 440ml cans were produced on the line. Technical data Output: 2.160 cans/ h at 440ml Designed for standard 0.33l & 0.44l cans; retrofit to other formats possible Machines Can pusher and rinser | Zomerdijk Engineering | 2021 Air rinser with ionized air | 2022 Can filler and seamer | Wild Goose | Evolution | 2019 5 Filling valves Checkweigher | Zomerdijk Engineering | 2022 Labeling machine | Framax With color printing coder Buffer table | 2019 Semi-automatic packaging machine | Zomerdijk Engineering | 2021 Formats: 24s; 2x12s
Housing for 101 plates.Delivery supply: with 2 end plates of stainless steel.Intermediate plates are not includedPlates maximum: 100Plate formats: 400x400Platefilter features: Manual spindlDimension ca. 300x60x100 cmdimensio between the first plate to the spindle ca. 170cm      More then 300 machines new and second hand on our seema .de
Grapes are introduced through the hopper and are progressively brought to the de-stemming speed rate without any impact.The cage and the mixer rotate in the same direction to prevent any shearing effects on the grapes.Capacity: approx. 12 to 20 t/h ( depending on grape-variety, ripeness and nature of grapes)More then 300 machines new and second hand on our seema .de
load 1.000 - 2.000,-kg.More then 300 machines new and second hand on our seema .de ... more information
TECHNICAL FEATURESflow rate: 15.000 – 50.000 l/hrecommended minimum fitting: ø 80Typology: Pump Francesca® with coaxial rubber semi-lobesmax working pressure: 3.0 barrotation speed: 47 – 153 rpmmotor: 9.2 kwampere: 18.7variator: electronicvoltage: 380/480 Three-phasefrequency: 50/60 Hzpump body material: AISI 316 and AISI 304material of the piston / rotor: NBRseals: TEFLONweight: 350.0 Kgdimensions: 92 x 106 x 101 cmMore then 300 machines new and second hand on our seema .de
consisting of:Â Rinser 12 grippersFiller 16 valves-with central filing height adjusstment1 head screw capper-for aluminium and PET screw caps-with pick and place unitBottle formats:-Glas bottles diam.: 69,5mm, 49,5mm, 79,5mm, 89/37mm rectangular, 86,5/51,5 rectangular-PET-Bottles diam.: 59,5mm; 75mm; 61,5mmCapping format:-Aluminium PP 31,5; PP 28-PET caps: PCO-28More then 300 machines new and second hand on our seema .de
for Seit Orion plate filterFormat: 600x600Thickness of frame: 25mmwithout gasketsMore then 300 machines new and second hand on our seema .de ... more information
for Seit Orion plate filterFormat: 600x600Thickness of frame: 25mmwithout gasketsMore then 300 machines new and second hand on our seema .de ... more information
Number of stations: 2 piecesFor self-adhesive labelsRotating turretWorking direction: left-rightElectrical power supply: 3 kWMore then 300 machines new and second hand on our seema .de ... more information