subcategories
(3rd category level)
Manufacturer:
(Category: 706)
Bottle washer, Fabr. Krones, type: Lavatec KESK-212/22-80, 22 bottles/row, with 80mm Cell division, plastic cells, with attached control cabinet in stainless steel, built in 1999, L: 7,955 mm, W: 4,216 mm, H: 3,270 mm, already dismantled and stored ... more information
Labeling machine, Fabr. Krones, type: Universella 600-15, with 2 units for torso, chest and back label, for cold glue labelling, built in 2016, has already been removed and stored. ... more information
Wet spent grain silo, Fabr. VetterTec, for 10 m³ net capacity, made of mild steel St 37-2, outlet hopper inclination 60°, with Discharge screw 3.0 m long, with control cabinet and remote counting device, standing on supporting structure, with Vertical ladder, Ø: 2,500 mm, cyl. Height approx. 2,000 mm
Filtration plant, Fabr. Seitz Orion, 100 x 100, for 180 hl/h, factory overhauled in 2002, consisting of: - Diatomaceous earth frame filter, with 29 KG frame in stainless steel, external risers, sight glass fittings with pressure gauge, with KG discharge tray with screw in stainless steel, with KG dosing device - Sheet filter, with 150 VA plates, external risers, sight glass fittings with pressure gauge - Control platform between both filters, step at the KG filter - Control cabinet
2 x 300 hl storage tanks, Fabr. Schulz Bamberg, bobbin bottom tanks, 0.9 bar, coolable via 1 cooling zone in the Double jacket, insulated with 130 mm and stainless steel sheet, with manhole in the lower frame, sight glass in the upper frame, with spray head with pulled down cleaning line, outlet pulled forward, ladder bracket, Crane eyelets, height: 4.25m, Ø: 3.95m, built in 2003, expanded
Labeller, make. MAG, for 2,000 bph, with 1 unit, run on 0.5 lt. EURO bottles, l -> r, built 1994. ... more information
Bottle filler, make MAG, type: RPe 12/3, for 2.000 bph, short pipe filler pre-evac, runs on 0,5 lt. EURO-bottles, l ->r, built 1994. ... more information
Separator, make Flottweg, type: AC1500-420, for 220 hl/h, with solids pump, control cabinet with Siemens control, built in 2018, not much running. ... more information
with 60 rinsing stations, 80 filling valves and 14 head screw capper Capacity: 2.0 l dia 99.8 x H= 350.00 mm - capacity: 7,000 bph 1.0 l dia 81.37 x H= 276.17 mm - capacity: 14,000 bph 0.6 l dia 68.0 x H= 245.16 mm - capacity: 20,000 bph The filler and rinser will be completely dismantled. All gear wheels on the filler are brand new. So the main bearing will be renewed. The filling valves will be complete renewed into new generation neck holding filling valves. The product inlet pipe will be renewed. All types will be renewed. So the Alcoa screw capper will be complete dismantled and modified, with a pick in place system to handle 28mm plastic screw caps. The AVE rinser will also be complete dismantled and rebuild from the beginning. The filling valves of the filler are neck holding filling valves so the filler does not have lifting cylinders anymore. The complete bottle tra ...
Capacity: 25,000 ltr. / h Control system: Siemens S 5 mounted on stainless steel frame ... more information
with 40 filling valves work directionl: left - right including safety housing and stainless steel enclosure ... more information
With 48 filling valves 12head crown corker 12head screw capper ... more information
capacity: approx. 10 tacts / min We don't have any documentation! ... more information
running direction: right - left for 28 mm VacuVent closure with safety housing ... more information
semi-automatic with Siemens S7 PLC with platform New machine ... more information
Ortmann +Herbst / Crown Simplimatic 100/15/15 Glass Bottle Filler with 100 filling valves, 15head crown corker and 15head Zalkin plastic cap screw capper with Pick and Place System Model: Hansa M Built: 1999 Running direction: left - right Pitch: 113 mm with double pre-evacuation Capacity: up to 40,000 bph at 250 ml of mineral water bottles up to 30,000 bph with 330 ml of beer glass bottles Electric: Siemens S7 with touch panel with safety housing incl. 200, 250, 330, 500, 750 and 1,000 ml sets (bottle drawings attached) incl. many spare parts (e.g. filling valves, lifting cylinders, crown cork head etc. - list attached) The product distribution list was renewed in November 2019. Hot filling is also possible if you use Nitrogen instead of Co2.
56 : 2 M/C No 15555/89 mounted on stainless steel frame ... more information
Vacuum filler bloc BERTOLASO COBERT with 48 filling valves blocked with 8head screw capping machine, aluminium work direction: right to left year of manufacturing: 1995, with safety housing Siemens S 7 control system CIP able central valve adjustment fixed for one bottle size technical inspected and ready to work
Pressure max.: 4,0 bar Pressure min.: -1,0 bar Test pressure: 5.8 bar Max. Temperature: 145°C ... more information