subcategories
(3rd category level)
Manufacturer:
(Category: 845)
Year of construction 1990 4 drilling spindles adjustable drilling spindle distance Stacking slider left Triggering by microswitches Delivery date: immediately from stock Price on request. We deliver and install worldwide! ... more information
DC-445 creasing: Up to 15 creases per sheet 30 job programmable set up and storage Up to 50 A4 sheets per minute 110-350gsm nominal paper range 100mm feed pile height for unattended operation Suction feed to eliminate marking 0.1mm increments and ±0.3mm accuracy Step by step set up panel ... more information
Professional production system Floor model - works electrically with foot release heavy duty version cleaned & checked Four-head model Floor model with foot pedal heavy duty model adjustable side stops several paper drills drill holder ... more information
Brochure & block stitching machine Gable roof & flat table position 1-head model Stitching head spacing normal 8 cm works with staples (not with wire roll) Stitching up to 25 mm / stinging up to 45 mm Staple ring brackets option Stand model Electric motor Foot trigger ... more information
checked & cleaned double head standing model - foot pedal operated heavy duty construction adjustable side rulers several paper drills drilling chuck drill diameter 3 - 20 mm hole distance min 55mm / max 430mm required tools 380 Volt / 0,55 kW / 1,7 A ... more information
single stitching head flat- /saddle stitching (swivelling table) thickness 1 sheet to 25 mm, clips reversed backward stab stitching up to 40 mm paper thickness staple width 14mm round wire No.30-21 + flat wire No. 0-V jib length 320 mm stitching table 610 x 200 mm space required B65 x T70 x H160cm packings dims W80 x D90 x H180cm, 240/300kg drive 220/380 Volt, 50 cycles, 1/3 HP
ITU evaluation device Paper scales Citizen 910 Printer PIO signal output ... more information
Cleaned & Checked Model 54S Number of heads: 1 Maximum stack height (mm) 50 Tabletop model Power supply (V) single or three-phase Power 220V=1.05A / 380V=0.6A W x D x H (cm) 80 x 54 x 73 Weight, net (kg) 30 ... more information
2-hole paper drilling machine Hole spacing 80mm Paper Insertion Height 45mm Heavy Cast Iron Table Table size W61 x D80 x H68 cm 220V=1.9A / 380V=1.1A ... more information
6cm-width needle perforator / creasing machine stand model with front & back table foot pedal perforating comb creasing comb back table stop with ruler - machine has been refurbished - can be tested ... more information
- 1 head stitiching machine - with the existing accessories ... more information
Built in 1965 Wire Stitching Machine 1 stitching head electr. Drive incl. base Delivery date: immediately Price on request. We deliver and install worldwide! ... more information
Year of manufacture 1980 Eyelet machine electr. Drive Underframe Delivery date: immediately from stock Price on request. We deliver and install worldwide! ... more information
Built in 1995 2 drilling spindles Sliding table electr. Drive electr. Foot switch Underframe Delivery date: immediately Price on request. We deliver and install worldwide! ... more information
-Fully automatic Booklet System max paper size 35x50 cms., equipped with : -Tower Horizon VAC-60Ha (6 Bins High pile plus air pump) -Tower Horizon VAC-60Hm (6 Bins High pile plus air pump) -Stacker receving tray Horizon ST-40 -Accumulate-Folder Horizon ACF-30 -Saddle Stitcher Horizon SPF-30S -Stitching heads Hohner Universal 43/6 S -Trimmer Horizon HTS-30S -Counter: approx 25 mio booklets
Corta Dürselen multi-spindle paper drilling machine. The PB05-750 is a multi-spindle paper drilling machine. with PLC control program. Module rear table with automatic saddle. Drill shavings suction system. 8 x drill heads (4 x new) ... more information
Corta Dürselen 4 Head Fully Automatic Paper Drill - inline automatic paper drilling line Dürselen Corta PB 09 F specifications Durselen Corta PB09 4 Head Fully Automatic Paper Drilling Machine, For drilling books in queues, stapled magazines, such as stacks of flyersTechnical details: With 4 drill headsMaximum size: 310 x 220 mmMinimum size: 145 x 105 mmDrill heads: 4 (up to 11 possible) Drill diameter: 3 – 14 mm Hole spacing: 31.7 – 310 mm Edge spacing: 5 – 20 mm Stack height: max. 50mm Drilling speed: 400 – 2,700 rpmLifting speed: 2 – 34 strokes/minCapacity: 1,200 stacks/h Equipment : Cooling and lubrication of the drill Variable lifting speed
A paper drill is sold. This was in use until its closure about 5 years ago. Machine can be inspected under electricity ... more information
THREE HHS HOT GLUE SYSTEMS to install on any folder gluer - from 1 to 4 glue points- years 2005/2010- Programmation- without guns- Price: 1.000 euro each LOT. NORDSON HOT GLUE SYSTEM MODEL 2035 with one spray gun included – 4 exits- PRICE: 1.000 euro LOT. ... more information
Year of construction: 1995 4 drilling spindles with automatic table movement adjustable drill speed Drill pad conveyor electr. Drive electr. Foot switch incl. base Price on request. We deliver and install worldwide! ... more information