paper converting: other used for sale

Year of construction: 1995 4 drilling spindles with automatic table movement adjustable drill speed Drill pad conveyor electr. Drive electr. Foot switch incl. base Price on request. We deliver and install worldwide!  ... more information

Open format min. 210 x 210 mm Open format max. 370 x 670 mm Final format min. 50 x 48 mm Final format max. 370 x 670 mm Feeding capacity: 150 mm Grammage 110 - 350 g/m2 Speed: up to 50 sheets / minute Cutting, creasing and perforating in one operation - 23" touch screen monitor - All in One PC - Software with template library - Barcode reading - Ultrasonic double sheet control - Chip conveyor belt - Lowerable stack delivery - 6 longitudinal knives, transverse knives (up to 25 cuts), creasing bar transverse (up to 20 creases) - 1 transverse tool module incl. tools for (segments): perforating, micro perforating - 1 tool module lengthwise incl. 2 rotary tools each for (segments): creasing, perforating, micro- perforating, slitting

checked & cleaned double head standing model - foot pedal operated heavy duty construction adjustable side rulers several paper drills drilling chuck drill diameter 3 - 20 mm hole distance min 55mm / max 430mm required tools 380 Volt / 0,55 kW / 1,7 A  ... more information

Brochure & block stitching machine Gable roof & flat table position 1-head model Stitching head spacing normal 8 cm works with staples (not with wire roll) Stitching up to 25 mm / stinging up to 45 mm Staple ring brackets option Stand model Electric motor Foot trigger  ... more information

ITU evaluation device Paper scales Citizen 910 Printer PIO signal output  ... more information

6cm-width needle perforator / creasing machine stand model with front & back table foot pedal perforating comb creasing comb back table stop with ruler - machine has been refurbished - can be tested  ... more information

Built in 1990 Staple Stitching Machine 2 stitching heads electr. Drive electr. Foot switch incl. base frame Delivery date: immediately from stock Price on request. We deliver and install worldwide!  ... more information

DC-445 creasing: Up to 15 creases per sheet 30 job programmable set up and storage Up to 50 A4 sheets per minute 110-350gsm nominal paper range 100mm feed pile height for unattended operation Suction feed to eliminate marking 0.1mm increments and ±0.3mm accuracy Step by step set up panel  ... more information

Baier Geba 46 Embossing and Punching machine Machine for punching, embossing and laminating of adhesive labels, labels and other rolls. Age: 1997 Max. web width: 250 mm Cutting area: 240 x 200mm Embossing area: 240 x 200mm 2x Unwinder 2x Punches Rewinder Waste Rewinder  ... more information

Bluhm Systems Markoprint Integra One Printing System Markoprint Integra One with HP cartridge technology. The system, with its small dimensions of 188 x 80 x 98 mm, can be easily installed in or on production equipment. The print head reaches top speeds of more than 180 m/min and has an IP-65 protection class. The printing system is equipped with a display for data entry as well as changing and checking system settings. Operators can check or change variable print information and settings directly on site on the user-friendly display. Intuitive control is provided by an i-Logic button. In addition, maintenance statuses can be shown on the display. With dimensions of 188 x 80 x 98 mm, the Integra One is particularly compact and has been specially developed for system integration. Smart cartridge monitoring Intelligent SmartCard cartridge monitoring identifies the curr ...

Kolbus Perfect Binding Line, Equipped With: Gathering Machine: Kolbus ZU 805 Gathering Machine, AGE: 2016, Basic Frame with 16 Gathering Stations, Gathering For Folded Sections And Single Sheets Possible, Mechanical And Electrical De-Coupling Of Each Station Possible, Air Center Vacuum And Compressed Air Supply For Gatherer, Reject Unit AS Raceway/Transfer, Integrated Jogging Station, Transfer Channel As Connecting Unit To The Binder, Perfect Binder: Kolbus KM 600, AGE: 2016, 21 Clamps With Co-Pilot Touchscreen, TFT Visualizing Monitors With Graphic Operator Guidance, Milling/Brushing, Equalizing Milling, Notching And Brushing Units, Kolbus LH370 EVA Hot-Melt Pre-Melt Unit, EVA Hot-Melt Roller Type Spine Gluing Unit On Mobile Base, PUR Spine Glue With Nordson Pre-Melter, EVA Hot-Melt Side Glue Unit With Controlled Cut-Off, I.R. Heating In Radius For Increased Glue Open Time, RA 49.A Pi ...

Ref. 449 Groove and perforation machine " Max Mohrstedt, BERLIN C. 19 " Built around 1900 Working width approx. 60 cm Groove and perforating comb weight 210 KG Condition: Tested, Functional / Perforating comb usable length approx. 55 cm  ... more information

Ref. 439 Stitching machine Agrafix BX Ma No. 16471 Cleaned and tested / Functional  ... more information

Ref. 440 Paper drilling machine "Foellmer" Model: IR 12/2 Ma. Nr.: 851 / Year of construction 1992 2 adjustable drill heads Accessories: Technical documentation, cutting strips, drills, Wax paper strips Very neat condition. Tested / Test possible  ... more information

Digi-Fold Nagel Serial: 120481 Include Operating manual and spare part list No working condition / For spare parts or repairing if invoiced in Germany + 19 % VAT Spare parts carrier / Non-functional  ... more information

El. Groove device, 50cm working width, table unit  ... more information

Auto. Water supply (e.g. for banding machines)  ... more information

THREE HHS HOT GLUE SYSTEMS to install on any folder gluer - from 1 to 4 glue points- years 2005/2010- Programmation- without guns- Price: 1.000 euro each LOT. NORDSON HOT GLUE SYSTEM MODEL 2035 with one spray gun included – 4 exits- PRICE: 1.000 euro LOT.  ... more information

- 1 head stitiching machine - with the existing accessories  ... more information

Board thickness up to 5 mm, milling width: 3/4/5/6 mm is given by milling cutter. Suitable for card-, micro- and corrugated board. Cutting depth from 0 up to 1 mm adjust by excenter. Deep processing adjust by knurled skrew. Due to separate adjusting of milling depth and deep processing, is it possible to mill the varnish-, cellophane-, aluminium- and PE-coating in a 1/100 mm range. Suitable for any folder gluer.