milling machines used for sale

This 6-axis BIMATEC SORALUCE FL-8000 was manufactured in 2014, featuring a robust SK50 and Capto C8 tooling system. It boasts extensive travels with X-axis at 8000 mm, Y-axis at 1300 mm, and Z-axis at 1800 mm. The machines main spindle operates across a speed range of 60-4000 rpm, ensuring versatile machining capabilities. With a total weight of 37000 kg, this machining center represents a significant asset for any production floor. Reach out for further details regarding this machining center.

This 3-axis Quaser MV 204 CP was manufactured in 2008. A robust vertical machining centre featuring a table size of 1400 x 700 mm and travels of 1270 mm in X, 700 mm in Y, and 610 mm in Z. It includes a 40 Taper spindle capable of 12,000 rpm and a 30-slot tool changer. Ideal for precise, heavy-duty machining. For more information about this machining centre, please reach out to us.

Inv. Num. : 2890 Type: FCR 50 CNC Producer: TOS Generated: GO 2005 Parameters: Control system: Heidenhain iTNC 530 Work table length: 2000 mm Work table width: 500 mm Maximum main spindle torque: 211 Nm (340 rpm) X-axis travel: 1250 mm Y-axis travel: 500 mm Travel Z-axis: 560 mm Speed: 20-2000 1/min Spindle power: 35 kW Cone: ISO 50 Main motor power: 7.5 kW Maximum table load: 1200 kg Tank: 80 l Pump power: 0.18 kW Machine length: 6000 mm Machine width: 3500 mm Machine weight: 8100 kg Equipment: CNC dividing head Tailstock HOFMANN GO 2005

max. wheel diameter: 620 mmgear width: 90 mmmax. module: 12 min. module: - no. of teeth: 6 - 100 pivoting angle: 0 - 90 Gradspindle taper: metr. 100 milling head speed: 28 - 56 U/minconnected load: 18 kVAControl: total power requirement: 14 kWweight of the machine ca.: 12 t- CNC control- electric handwheel- new motors/ electrics- various change wheels- chip conveyor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 250 mmgear width: 40 mmmax. module: 8 min. module: - Control: total power requirement: 9,7 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 2,65 x 1,90 x 2,05 m- CNC control- electric handwheel- new motors/ electrics- various change wheels- chip conveyor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: 1 used L-milling head from a KPCU 8000 /AR built in 2006 According to the customer, it was overhauled in 2017 and has had little use since then. including transport holderweight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 600 x 600 x 1,250 mm ... more information

Description: Table size: 1070x230 mm Head adjustment: 90 degrees Spindle speed: 80 - 2720 rpm Digital X/Y/Z readout  ,Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 2,100 mm, weight approx.: 750 kg ... more information

Description: Side shift Free elevator Incl. Set of extension forks (length 2000 mm) Attention! Without gas bottleRead off operating hours: 3,781 h, loading capacity: 2,500 to, lifting bridge: Duplex, lifting height: 3,000 mm, length of forks: 1,150 mm, overall height: 2,100 mm, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,200 x 2,100 mm, weight approx.: 4,040 kg

Approx. Onsite Dimension. (l x w x h): 1,000 x 740 x 2,000 mm, weight approx.: 350 kg ... more information

Description: Machine number: 110594 Control: Heidenhain TNC 124 Travels: X-axis: 310 mm Y-axis: 170 mm Z-axis: 330 mm Speed range: 40 - 2000 rpm Tool holder: SK40 Motor: Operating voltage: 380 V Frequency: 50 Hz Control voltage: 24 V Connected load: 3.1 kW Rated current: 25 A Including: Coolant pump, machine viceApprox. Onsite Dimension. (l x w x h): 1,200 x 1,600 x 1,850 mm, weight approx.: 1,000 kg

Description: Incl. coolant pump Counterholder Operating instructions SK 40 milling arbors long Table size: 600x235 mm Travel paths: X 310 ,mm Y 170 ,mm Z 340 mm  , Speed: 50 - 2000 rpm Holder SK 40 Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,800 mm, weight approx.: 900 kg ... more information

Description: Incl. operating instructions Electrical circuit diagram Disk Machine parameters Machine parameters 3 + 2 axes (4th and 5th axes are conventionally operated) Control: HEIDENHAIN TNC 426 16-fold tool changer Support SK 40 Table 700 x 500 mm Travel distances X 500 ,mm Y 400 ,mm Z 400 mm  , Speed 20-8000 rpm max. feed speed 10000 mm /min Attention, the machine is currently not ready for use! The screen shows 'please check signal cable', so a defect in the control unit cannot be ruled out!Approx. Onsite Dimension. (l x w x h): 2,200 x 2,300 x 2,200 mm, weight approx.: 3,800 kg

Description: From the training workshop Travel paths: X 500 mm Y 380 mm Z 350 mm  , Spindle holder ISO 40 Spindle speed 20 - 4000 rpm Feed range 1 - 3000 mm/min Without vice! Approx. Onsite Dimension. (l x w x h): 2,100 x 1,800 x 2,000 mm, weight approx.: 2,000 kg ... more information

Description: Machine number: 2199 Spindle speed: 50 - 900 rpm Feed rate: 10 - 370 mm/min Table dimensions: 600 x 180 mm With 3 grooves Travel distances: X: approx. 400 mm Y: approx. 300 mm Z: approx. 300 mm Incl. vertical milling head, collets and other various machine accessoriesweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm

Description: Fabrication number: 858 Spindle speed: 63 - 2000 rpm Tool holder: SK 40 Table dimensions: 1500 x 300 mm With 5 grooves and an attached vice Jaw width: 160 mm Travel distances: X: approx. 600 mm Y: approx. 400 mm Z: approx. 400 mmweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,200 x 1,600 mm

Description: With swivel head Type: FNCK Serial number: 20012 Year of manufacture of the machine probably 1990 With FAGOR digital display Table dimensions: 705 x 315 mm Z travel distance: approx. 0 - 330 mm Y travel distance: approx. 0 - 200 mm X travel distance: approx. 0 - 400 mm Tiltable milling head: +/- 45° With horizontal spindleweight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,800 mm

This 6-axis Yaskawa Motoman ArcWorld was manufactured in 2014. Ideal for versatile setups, it features a maximum load capacity of 6kg and a working range of 1440mm. Weighing 130kg, it can be mounted on walls, ceilings, or floors. A great addition to any production line, the Yaskawa Motoman ArcWorld robot we have for sale is a robust choice. Contact us for further details regarding this Robot.

Datron M 8 Cube A with only 650 hours, Year of manufacture 2015, Control Datron HSC Pro, Travel X/Y/Z 1020/830/245 mm, Tool changer 15-fold with length sensor, Spindle speed up to 60,000 rpm, Spindle cooling unit, Hand control module, Z TPR precision sensor, Vacuum plate 500x500x30 mm, Vacuum pump Compact compressed air system, Esprit CAD CAM basic module, Esprit SolidMill, Esprit SolidMill Freeform, Bluchip Performance CAD,

Description: • Rotary dividing head • Serial number D9266A • Chuck with 3 jaws diameter 250 mm • Dimensions for transport 800 x 600 x 500 mmweight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm ... more information

Description: Machine is sold as defective, without CE certificate and without accessoriesApprox. Onsite Dimension. (l x w x h): 1,600 x 1,400 x 1,800 mm, weight approx.: 1,000 kg ... more information