Manufacturer:
(Category: 103)
GeneralUniversal milling machine with duoblock construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal900 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineChain Tool changer planevertical Type of gripperDouble gripper Number of tools60 Coolant supply ICSCoolant supply: coolant through spindle centre form AD 40 bar/23 l/min(theoretical pump performance) rotating clear-view window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output (theoreticChip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm / 3 ...
Table length: 6500 mmTable width: 1100 mmLongitudinal X: 5000 mmCross Y: 1200 mmVertical Z: 2000 mmPositions ATC: 1  CNC Brand: Heidenhain Bed type milling machineLagun Goratu - GBM CM5 X-Axis: 5000mm Y-Axis: 1200mm Z-Axis: 2000mm Table Length: 6500mm Table Width: 1100mm Table load: 6000 Power on spindle: 37kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Millinghead auto-index:2.5 x 2.5° Work ...
x-travel: 5000 mmy-travel: 2500 mmz-travel: 1500 mmControl: Typ Fidia C20/6H-SB total power requirement: 90 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
x-travel: 2500 mmy-travel: 1300 mmz-travel: 900 mmControl: Heidenhain iTNC 530 table surface area: 2500 x 800 mmtable load: 5,0 ttool taper: SK 50 DIN69871spindle turning speed range: 36 - 4000 U/minfeed range: 2 - 12000 mm/minmain drive: 25 kWtotal power requirement: kWweight of the machine ca.: 17 tdimensions of the machine ca.: 8,4 x 4,5x 3,8(3,9) mThe main engine was overhauled in September 2022 for € 6,000.The machine was partially overhauled in 2007Scope of overhaul:Feed motors were overhauledNew Heidenhain iTNC 530 control system with newmain spindle drive (Siemens)Retention of the control cabinet and feed drivesGeometric overhaul of the machineOverhaul of the tool changerDefective guideway covers were repaired or replacedThe milling head was completely overhauled approx. 3 years ago.Equipment:CNC control Heidenhain iTNC 530Horizontal/vertical swivelling milling headSeparate CN ...
This 3-axis DECKEL DMC 60 U hi-dyn was manufactured in 2000. A vertical machining center featuring a HEIDENHAIN TNC 430 control, it offers a spindle speed of 12,000 rpm and is equipped with a 40 bar internal cooling system. The machine includes a chip conveyor, two 650x500 mm pallets, and a 60-slot tool storage. Ideal for those looking to buy this DECKEL DMC 60 U hi-dyn machining center. Contact us for further details regarding this machining center.
This 3-axis Matsuura RA-4G Machining Center was manufactured in 1998. It features a YASNAC control, with X-axis travel of 1020 mm, Y-axis travel of 550 mm, and Z-axis travel of 510 mm. The machine supports a maximum pallet load of 500 kg and offers a spindle speed range of 30-8000 rpm, enhanced by internal and high-pressure cooling systems. Ideal for robust machining needs, the Matsuura RA-4G machine we have for sale. Contact us for further details.
This 5-axis HERMLE C22 with handling system IH30 Machining Centre was manufactured in 2015. It features a Heidenhain TNC 640 control, a swivel rotary table with a 320mm diameter, and a high-speed spindle capable of 42,000 rpm. The machine includes a 65-tool magazine with HSK-E40 holders, an automatic cabin door, and a robust coolant system. Ideal for precision machining, the HERMLE C22 with handling system IH30 offers dynamic efficiency and precision. For more information about this Machining Centre, please reach out to us.
Description: Includes 3-axis digital display ,HEIDENHAINtable surface area l x w : 1200x300 mm, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 2,000 x 2,000 mm ... more information
Description: Distance from spindle nose to machine table 102 to 5008 mm , maximum table load 454 kg , Serial number 43269 ,  , Attention: without machine vices on the machine tablez-motion: 4,006 mm, x-motion: 1,016 mm, y-motion: 4,006 mm, table surface area l x w : 1467x267 mm, tool taper: ISO 40, turning speed range: 0 bis 4000 rpm, rapid motion: 5,1 m/min, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 2,000 x 2,200 mm
Description: Table 1700X470 mm Strokes 1200X600X600 mm isa 40 spindle 3-axis heidenhain positip displayApprox. Onsite Dimension. (l x w x h): 2,700 x 2,500 x 2,400 mm, weight approx.: 6,000 kg ... more information
Description: Traverse path X 620 mm, Y 420 mm, Z 380 mm, table load 400 kg, table 800 x 400 mm, SK 40 tool holder, spindle speed 3150 rpm, HEIDENHAIN control, Attention: without viceApprox. Onsite Dimension. (l x w x h): 2,000 x 2,300 x 2,000 mm, weight approx.: 2,000 kg ... more information
Description: Traverse path X 620 mm, Y 420 mm, Z 400 mm, distance spindle nose to table surface min. 100 mm, max. 500 mm, table load 400 kg, table 800 x 400 mm, tool holder ISO 40, vertical spindle max. 4000 rpm, swivelling angle manual max. +/- 45°, control HEIDENHAIN TNC 320, spindle hours read 4285, attention: without viceApprox. Onsite Dimension. (l x w x h): 2,000 x 2,700 x 2,000 mm, weight approx.: 2,000 kg
Description: Traverse paths X 400 mm, Y 350 mm, Z 400 mm, hydraulic tool clamping, cone SK 40, speed range 1 to 4500 rpm, table support 650 x 350 mm, control HEIDENHAIN TNC 128, read machine hours 8027, programme hours 1063, attention: without viceweight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,800 x 2,000 mm
Description: Traverse paths X 700 mm, Y 800 mm, Z 1300 mm, HEIDENHAIN 310 control, SK 50 tool holder, 20 to 3200 rpm, read hours 11941, Attention: without mounted viceweight approx.: 8,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 3,000 x 2,500 mm ... more information
Description: max. feed X 745 mm, Y 406 mm, Z 406 mm, max. workpiece height 735 mm, tool holder SK 40, speed 50 to 3750 rpm, table 1270 x 254 mm, head can be rotated and swivelled, Attention: without viceApprox. Onsite Dimension. (l x w x h): 2,000 x 2,000 x 2,400 mm, weight approx.: 1,500 kg ... more information
Description: max. feed X 745 mm, Y 406 mm, Z 406 mm, max. workpiece height 735 mm, tool holder SK 40, speed 50 to 3750 rpm, table 1270 x 254 mm, head can be rotated and swivelledApprox. Onsite Dimension. (l x w x h): 2,000 x 2,000 x 2,400 mm, weight approx.: 1,500 kg ... more information
Description: Traverse paths X 525 mm, Y 425 mm, Z 415 mm, vertical quill stroke 80 mm, distance from spindle centre to table 142.5 to 557.5 mm, tool holder ISO 40, spindle power (drive power) 6 kW, torque 300 Nm, speed infinitely variable in 2 ranges 25 to 5000 rpm, table 400 x 800 mm, table load 500 kg, HEIDENHAIN TNC 407 control, Attention: without mounted viceApprox. Onsite Dimension. (l x w x h): 2,300 x 3,800 x 2,200 mm, weight approx.: 4,100 kg
Description: SK 40 tool holder, table 800 x 400 mm, max. 2000 rpm, spindle head travel 360 mm, table travel 430 mm transverse and 400 mm verticalApprox. Onsite Dimension. (l x w x h): 1,500 x 2,000 x 2,000 mm, weight approx.: 1,800 kg ... more information
Description: max. 1500 rpm, travel X 700 mm, Y 360 mm, milling head swivels +/- 45°, table 1040 x 260 mm, attention: digital display defectiveApprox. Onsite Dimension. (l x w x h): 1,500 x 2,000 x 2,300 mm, weight approx.: 2,500 kg ... more information
Description: Tool holder SK 40, table 800 x 400 mm, max. 2000 rpm, spindle head travel 360 mm, table travel 430 mm transverse and 400 mm vertical, including vertical headApprox. Onsite Dimension. (l x w x h): 1,500 x 2,000 x 2,000 mm, weight approx.: 1,800 kg ... more information