Manufacturer:
(Category: 103)
GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)30 kWDrive power (40% DC)46 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length800 mmBar diameter max.65 mmWork spindle (left)Diametre of spindle nose170h5 mmSpindle noseFlat flange Spindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5 ...
5-axis machining center for milling and turning operations Specifications: Workspace: X-axis: 1500 mm Y-axis: 1500 mm Z-axis: 1100 mm A-axis: NC controlled C-axis: NC controlled and FD operation 260 min-1 Max. workpiece size: Diameter: 1600 mm Height: 1300 mm Workpiece weight: 3500 kg Table size: ø 1400 mm
Description: 8-drawer chest with contents of tools for drilling milling cone pliers and moreweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 715 x 725 x 1,025 mm ... more information
Description: Serial number: 67 , Table: Surface 1400x550 mm , T-slot 5 of 18 mm/H7 , Slot spacing: 100 mm , Max. permissible weight: 2500 kg , Travels: , X: 1200 mm , Y: 550 mm , Z: 550 mm , Feed rates: , Working feed rate: 0-4000 mm /s , Rapid traverse: 10.000 mm/s , Spindle Power: 13.5 hp , Taper: ISO 50 , Speeds: 50-2500 rpm , Feed motors: , X,Z: 17 nm , Y: 10.4 nm , Motors: , Hydraulic: 1.5 hp , Lubrication: 0.5 hp , Cooling: 0.8 hp , Full Power: 25 kw ,  ,Approx. Onsite Dimension. (l x w x h): 3,730 x 2,680 x 2,350 mm, weight approx.: 7,500 kg
Description: travel lengthwise 350mm rapid traverse lengthwise feeds 12,5 - 140 mm/min table 785x200mm speeds 35,5 - 1800/minApprox. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 0 kg ... more information
Description: 960 rpm, table approx. 900 x 300 mmApprox. Onsite Dimension. (l x w x h): 1,200 x 1,500 x 1,800 mm, weight approx.: 2,500 kg ... more information
x-travel: 590 mmy-travel: 195 mmz-travel: 420 mmspindle taper ISO: 40 ISOtable:: 950 x 230 mmfeed:: 8.0 - 200 mm/min.turning speeds: 31.5 - 1000 U/mindistance spindle /table: 0 - 425 mmtransmission ratio: 18 StkT-slots: 3x 25.0 mmtotal power requirement: 2.32 kWweight of the machine ca.: 1200 kgrange L-W-H: 1200 x 1000 x 1600 mm Machine from a training workshop Well-maintained condition () New price approx. 30.000 euros Special price on requestThe VIKING universal milling machine is suitable for carrying outlight and medium-heavy milling work. Thanks to its greatversatility and easy conversion, it can be used successfully in workshopsto machine small and medium-sized series.Equipment:- HURON universal milling head, adjustable to all angle positions- HEIDENHAIN 3-AXIS digital display - type VRZ 769- manually foldable milling spindle guard- horizontal spindle including counterholder- heavy ...
x-travel: 590 mmy-travel: 195 mmz-travel: 420 mmspindle taper ISO: 40 ISOtable:: 950 x 230 mmfeed:: 8.0 - 200 mm/minturning speeds: 31.5 - 1000 U/mindistance spindle /table: 0 - 425 mmtransmission ratio: 18 StkT-slots: 3x 25.0 mmtotal power requirement: 2.32 kWweight of the machine ca.: 1200 kgrange L-W-H: 1200 x 1000 x 1600 mm Machine from a training workshop Well-maintained condition () New price approx. 30.000 euros Special price on requestThe VIKING universal milling machine is suitable for carrying outlight and medium-heavy milling work. Thanks to its greatversatility and easy conversion, it can be used successfully in workshopsto machine small and medium-sized series.Equipment:- HURON universal milling head, adjustable to all angle positions- HEIDENHAIN 3-AXIS digital display - type VRZ 769- manually foldable milling spindle guard- horizontal spindle including counterholder- heavy ...
This 5-axis DMG MORI CMX50U was manufactured in 2019 and features a SIEMENS 840D SL control system. It boasts a spindle speed of 12,000 rpm and a SK40 taper, enhancing its versatility. Equipped with a Renishaw touch probe and 3D Quick Set for precision, it also includes an EROWA clamping system and a pallet size of 320x320mm, supporting a max. pallet load of 150kg. For more information about this Machining Center, please reach out to us.
GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmDie and Mold Package linearDie and Mold Package linear Dynamic package V-type Eagle timing belt for Z axisPackage Mill / TurnPackage Mill / Turn (only available for Siemens 840D solutionline) NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in ...
GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal350 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmTorque (40% DC) 48 NmSpeed range 20 - 15000 rpmSpindle taper BT 30Clamping System ISO 7388-3 - JD30Integrated swivel rotary table simultaneousIntegated swivel rotary table DMP 35 version 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive SoRotary joint, 6 channelsRotary lead through for integrated swivel rotary table with torque drives ...
Stock number: 3896 PROCESSING Manufacturer: HERMLE , Type: C800 V Machines NO.: 14337, Year of manufacture: 2001 Specifications: Table size 1000 x 560 mm Large table load 1500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Stepless spindle speeds 0-16000 rpm Spindle motor 25/16.8 Kw Total power 31 KVA Control Heidenhain 430 - 3 Axis Fabr. Operating hours spindle 9666 hours Accessories: Tool holders 2 pcs Operating instructions Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weight: 7000 kg
Year: 2011 - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders - cooling and lubrication installation ... more information
- X: 760 mm - Y: 530 mm - Z: 560 mm - Table size: 1200 x 500 mm - Speed range: 12,000 rpm - Spindle mount: SK 40 - IKZ: 20 bar - WZ changer: 30 times - electr. Handwheel: yes - Chip conveyor: yes - Control: Siemens 828 D - Suction: yes - Operating hours: 17,500 h - Total power: 25 kW - Machine weight: 8 kg - Space requirement (W x D x H): 2.4 × 2.0 × 2.8 m - Condition: good, little run Details 4th axis, swivel table Accessories Documentation, no other accessories
Nice machine, but parts of the controls are missing. Mechanically very good condition Sell spare parts or complete machine ! Table, milling head, guides, spindles, measuring rulers, motors, electrical parts, control panel, ... or to convert to new control ! ... more information
Machine : Gear Hob 1 set of gear hobs 20 pcs. Angle of engagement 20 degrees Module : Set all sizes M 1 2x M 3 M 1.25 M 3.25 M 1.5 2 x M 3.5 M 1.75 M 3.75 M 2 M 4 M 2.25 M 4.5 M 2.5 M 5 M 2.75 M 5.5 M 6 Gear hobs : M 1 , 20 degrees , φ 70x50, 80% M 1.5 20 degrees, φ 54x56, 90%, M 2 20 degrees, φ 72x72 90% M 2.5 20 degrees, φ 60x65, 80% M 4 20 degrees, φ 90x78, 80% M 2.5 20 degrees φ 78x190, 30% M 1.6 30 degrees, φ 85x130, 90% M 1.5875, 30, φ 82x120, 90%
Travel: X - Travel 750 mm Y - Travel 400 mm Z - Travel 500 mm Table 320 x 1270 mm Speeds 3800 rpm ... more information
Workspace: Travel in X/Y/Z 300/200/350 mm Distance spindle nose table 80 – 430 mm Rapid traverse 1200 mm/min Working feed X/Y/Z manual 50-550 rpm Feed force in X/Y/Z manual kN Clamping surface (rigid angle table) 600 x 200 mm Max. table load (rigid angle table) 50 kg Vertical milling head: Speed range 80-2200 rpm Power 1.4 kW Tool holder SK30 Dimensions: Length x width x height 1150 x 1410 x 1550 mm Weight approx. 500 kg
Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Tool Changer Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ... ... more information