Manufacturer:
(Category: 103)
x-travel:500 mmy-travel:350 mmz-travel:400 mmfeed:10~500 (18) mm/minrapid traverse x + z axis:1200 mm/min:1200 mm/min.table surface area:800x400 horiz. mmtable surface area:250x950 verti. mmtable load capacity:400 kgt-slots (width x number x distance):8x14x45 main drive:3 kWweight of the machine ca.:ca. 2300 kgdimensions of the machine ca.:1820x1640x1710 mmWarranty: 12 months warranty material BRAND NEW CONVENTIONAL TYPE MILLING MACHINE >Standard accessories of milling machine:- 3-axis digital display with manifold functionalities- Vertical milling head swivel plus and minus 90 degrees, swiveling with down feed, for horizontal milling backwards- Collet chuck with collets O 4,5,6,8,10,12,14,16 mm- Short tool shank 22, 27 mm- Reduction sleeve MK1, MK2, MK3, MK4- Chuck O 0-6 mm, 1-13 mm O- Chip pan- Arbor O 22, 27 mm- Draw bar- Anchor bolts- Coolant system- Support for hori ...
x-travel:600 mmy-travel:500 mmz-travel:450 mmturning speeds:5 - 5000 U/minquill stroke:90 mmtotal power requirement:9 kWfeed range:0-10.000 mm/minweight of the machine ca.:3260 kgdimensions of the machine ca.:2200x2800x2000 mmspindle:6 kWvertical milling head:SK 40 automatic tool changer:22 Pos.CNC universal milling machine with toolchanger,Equipped with CNC-Heidenhain TNC 407el.handwheelcoolant device
x-travel:850 mmy-travel:500 mmz-travel:610 mmrotary table::400 mmspindle turning speed range:12.000 1/mindrive capacity - spindle motor:17/10 kWcontrol:HEIDENHAIN iTNC 530 Tool changer:40- fach spindle taper ISO:SK 40 weight of the machine ca.:7,7 ttotal power requirement:28,5 kWdimensions of the machine ca.:3 x 2.70 x 3,2 m5-axis simultaneously universal-machining center,NC-rotary-swivelling table dia. 400mm,3D infrared touchprobe,el. handwheel,chipconveyor,airblast through spindle,internal coolant supply 40bar,flushgun,direct measuring system,approx. 38.000h "machine on", approx. 14.500h "spindle on"
x-travel:2000 mmy-travel:1000 mmz-travel:1050 mmtable clamping surface::2.400 x 1.000 mmcontrol:HEIDENHAIN TNC 426 CB turning speeds:20 - 5000 1/mintool taper:SK 50 spindle:22 kWtotal power requirement:50 kVAweight of the machine ca.:10 tdimensions of the machine ca.:5 x 3 x 3 mCNC universal bed milling machine,direct measuring system,coolant device,coverchip conveyerhead is swivelling automaticaly horizontal / verticalhead is swivelling semiautomaticaly 2,5 degrees over inchinghead is swivelling manually on the 5 th axis with display on screenapprox. 59.250 h hours "machine on", approx. 9.656 h hours "programm on"
x-travel:600 mmy-travel:400 mmz-travel:400 mmnumber of spindle speeds:63 - 3.150 1/minfeed stepless:12-3000 / 6-1500 (Z) mm/minquill stroke:100 mmmilling-head swivable +/-:90° spindle taper ISO:SK 40 surface area:630 x 400 mmtotal power requirement:8 kWweight of the machine ca.:2,2 tdimensions of the machine ca.:2 x 1,9 x 1,95 muniversal milling machine with point to point control,mechanical handwheels,swivel - rotary table (mech.) +-45°,hydr. tool clamping,half cabin,coolant device,manuals (German language)
x-travel:2.500 mmy-travel:1.000 mmz-travel:1.250 mmtable surface area:2.700 x 900 mmcontrol:TNC 430 HEIDENHAIN turning speeds:4.500 1/mintool taper:SK 50 spindle drive:20 kWtable load:8 tweight of the machine ca.:16,5 tCNC milling machine,millling head swivelable in 2 layers 1°/2,5°,chip conveyor,no toolchanger
x-travel:3000 mmy-travel:1000 mmz-travel:1500 mmT-slot (width-distance-quantity):22H8x7 Stk. mmTable area:3100x1050 mmmax. table load:8000 kgspindle taper:50 SKspindle speeds:3500 1/min.spindle motor:15/18,5 kWfeed:1~8000 mm/minrapid speed:10 m/minpositioning accuracy:JIS 6338;±0,005mm / 300mm VDI 3441:P0,014mm repeating accuracy:JIS 6338:±0,003mm VDI3441:PS0,01 mm total power requirement:35 KVAweight of the machine ca.:18 tdimensions of the machine ca.:7670x4325 (LxT) mmuniversal milling head:2,5° auto automatic tool changer:24-fach LINEAR SCALES IN X-Y-Z AXES:von HEIDENHAIN; mit Ausblasvorrichtung cnc control:HEIDENHAIN 640i TNC chip conveyor:Schneckenausführung vorne/hinten TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENTPAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER,70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVORPACKING : BY SEAWORTHY PACKAG ...
Weight: approx 2 t. dimensios: 1 x 1 x 1,5m ... more information
x-travel:2300 mmy-travel:1200 mmz-travel:950 mmfeed::max. 4000 mm/minspindle turning speed range:31,5 - 1.600 1/minspindle taper:SK 50 spindle drive:30 kWmilling head -swivable +/-:45 °distance spindle /table:max. 1200 mmtable surface area:3000 (4200) x 1200 mmtable load capacity:10000 kgControl:TNC 426 HEIDENHAIN weight of the machine ca.:38 tCNC milling machine,from 2008 with HEIDENHAIN TNC 426 control,in 2022 overhauled,2 pcs. workbenches2 pcs. tool cabinetlot of tools (around 140 pcs.),el. handwheelapprox. 69.000h "machine on, 18.500h "spindle on"very good condition, under power in factory
x-travel:1250 mmy-travel:470 mmz-travel:540 mmspindle speed:40,55,80,115,160,225,315,440,620,880,1240,1750 U/min (12 Stufen) spindle taper:50 NT/BT/SKtable load:1000 kgtable-size:400x1800 mmT-slot (width-distance-quantity):18x4x80 mmdistance spindle nose and table:50-520 mm (vertikal) distance spindle center to table:50-520 mm (mit Halter), 360-790 mm (ohne Halter) feeds:X/Y/Z:16-1200/16-1200/8-450 mm/minrapid travel x/y/z:2000/2000/700 mm/mindistance spindle center to column:500 mmspindle drive:5,5 kWweight of the machine ca.:3,2 tdimensions of the machine ca.:3000/2535/1830 mmCNC controls from:Siemens/Fanuc/Fagor/Heidenhain
x-travel:1000 mmy-travel:430 mmz-travel:540 mmspindle speed:40,55,80,115,160,225,315,440,620,880,1240,1750 U/min (12 Stufen) spindle taper:50 NT/BT/SKdistance spindle center to column:500 mmtable-size:1500x360 mmtable load:800 kgT-slot (width-distance-quantity):18x4x80 mmdistance spindle nose and table:90-520 mm (vertikal) distance spindle center to table:90-520 mm (mit Halter), 400-800 mm (ohne Halter) feeds:X/Y/Z:16-1200/16-1200/8-450 mm/minrapid travel x/y/z:2000/2000/700 mm/minspindle drive:5,5 kWweight of the machine ca.:2,9 tdimensions of the machine ca.:2050x2535x1800 mmCNC controls from:Siemens/Fanuc/Fagor/Heidenhain
x-travel:1500 mmy-travel:1000 mmz-travel:950 (opt.1500) mmT-slot (width-distance-quantity):22H8x7 Stk. mmTable area:1600x1050 mmmax. table load:3000 kgspindle taper:50 SKspindle speeds:3500 1/min.spindle motor:15/18,5 (22/26 opt) kWfeed:1~5000 mm/minrapid speed:10 m/minpositioning accuracy:JIS 6338;±0,005mm / 300mm VDI 3441:P0,014mm repeating accuracy:JIS 6338:±0,003mm VDI3441:PS0,01 mm total power requirement:30 KVAweight of the machine ca.:10 tuniversal milling head:manuell LINEAR SCALES IN X-Y-Z AXES:von HEIDENHAIN; mit Ausblasvorrichtung von chip conveyor:Schneckenausführung vorne/hinten cnc control:Siemens/Fanuc/Heidenhain TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENTPAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER,70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVORPACKING : BY SEAWORTHY PACKAGEWARRANTY: 12 MONTHSVALIDITY : 60 DAYS
x-travel:2000 mmy-travel:1000 mmz-travel:950 (opt.1500) mmT-slot (width-distance-quantity):22H8x7 Stk. mmTable area:2100x1050 mmmax. table load:5000 kgspindle taper:50 SKspindle speeds:3500 1/min.spindle motor:15/18,5 (22/26 opt) kWfeed:1~5000 mm/minrapid speed:10 m/minpositioning accuracy:JIS 6338;±0,005mm / 300mm VDI 3441:P0,014mm repeating accuracy:JIS 6338:±0,003mm VDI3441:PS0,01 mm total power requirement:30 KVAweight of the machine ca.:11 tDimensions (L/W/H):4325 x 5640,5 x 2840 mmuniversal milling head:manuell LINEAR SCALES IN X-Y-Z AXES:von HEIDENHAIN; mit Ausblasvorrichtung von chip conveyor:Schneckenausführung vorne/hinten cnc control:Siemens/Fanuc/Heidenhain TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENTPAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER,70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVORPACKING : BY SEAWORTHY PACKAGEWARRANT ...
x-travel:2600 mmy-travel:1000 mmz-travel:950 (opt.1500) mmT-slot (width-distance-quantity):22H8x7 Stk. mmTable area:2700×1050 mmmax. table load:5000 kgspindle taper:50 SKspindle speeds:3500 (5000 opt.) 1/min.spindle motor:15/18,5 (22/26 opt) kWfeed:1~5000 mm/minrapid speed:10 m/minpositioning accuracy:JIS 6338;±0,005mm / 300mm VDI 3441:P0,014mm repeating accuracy:JIS 6338:±0,003mm VDI3441:PS0,01 mm total power requirement:35 KVAweight of the machine ca.:15 tuniversal milling head:manuell LINEAR SCALES IN X-Y-Z AXES:von HEIDENHAIN; mit Ausblasvorrichtung von chip conveyor:Schneckenausführung vorne/hinten cnc control:Siemens/Fanuc/Heidenhain TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENTPAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER,70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVORPACKING : BY SEAWORTHY PACKAGEWARRANTY: 12 MONTHSVALIDITY : 60 DA ...
x-travel:3000 mmy-travel:1000 mmz-travel:950 (opt.1500) mmT-slot (width-distance-quantity):22H8x7 Stk. mmTable area:3100x1050 mmmax. table load:8000 kgspindle taper:50 SKspindle speeds:3500 (5000 opt.) 1/min.spindle motor:15/18,5 (22/26 opt) kWfeed:1~5000 mm/minrapid speed:10 m/minpositioning accuracy:JIS 6338;±0,005mm / 300mm VDI 3441:P0,014mm repeating accuracy:JIS 6338:±0,003mm VDI3441:PS0,01 mm total power requirement:35 KVAweight of the machine ca.:13,5 tuniversal milling head:manuell LINEAR SCALES IN X-Y-Z AXES:von HEIDENHAIN; mit Ausblasvorrichtung von chip conveyor:Schneckenausführung vorne/hinten cnc control:Siemens/Fanuc/Heidenhain TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENTPAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER,70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVORPACKING : BY SEAWORTHY PACKAGEWARRANTY: 12 MONTHSVALIDITY : 60 D ...
x-travel:4000 mmy-travel:1000 mmz-travel:950 (opt.1500) mmT-slot (width-distance-quantity):22H8x7 Stk. mmTable area:4000x1050 mmmax. table load:9000 kgspindle taper:50 SKspindle speeds:3500 (5000 opt.) 1/min.spindle motor:15/18,5 (22/26 opt) kWfeed:1~5000 mm/minrapid speed:10 m/minpositioning accuracy:JIS 6338;±0,005mm / 300mm VDI 3441:P0,014mm repeating accuracy:JIS 6338:±0,003mm VDI3441:PS0,01 mm total power requirement:40 KVAweight of the machine ca.:23,6 tuniversal milling head:manuell LINEAR SCALES IN X-Y-Z AXES:von HEIDENHAIN; mit Ausblasvorrichtung von chip conveyor:Schneckenausführung vorne/hinten cnc control:Siemens/Fanuc/Heidenhain TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENTPAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER,70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVORPACKING : BY SEAWORTHY PACKAGEWARRANTY: 12 MONTHSVALIDITY : 60 D ...
x-travel:1000 mmy-travel:320 mmz-travel:400 mmTable dimensions:1000 x 400 mm ... more information
adjustment drive of the grinding spind.slide:0,0025 - 0,05 mmtotal power requirement:100 kWadjustment of grinding head slide:150 mmweight of the machine ca.:17 tgrinding spindle drive:2 x 37 kWgrinding width:30-150 mmperipheral speed:34 m/secworkpiece speeds:60 - 300 mm/Sek.grinding height:70 mmgrinding wheel diameter:750 mmgrinding tools:750 x 75 x 350 mmgrinding wheel turning speeds:870 U/Min.max. workpiece diameter:250 mm
x-travel:1200 mmy-travel:800 mmz-travel:550 mmdistance spindle center to table:150-700 mmdistance between columns:920 mmtable-size:1320x800 mmtable load:2000 kgT-slot (width-distance-quantity):14x120x7 mmspindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/minspindle drive:7.5/11 (opt. 30/39; 20/26 kWSpindle motor torque:47.7/70 (opt. 29.1/37.8; 10.4/13.5) N.m.rapid traverse in x-y-z axis:30000 (opt. 40000) mm/minCutting feed rate X/Y/Z axis:1~10000 (opt.1~20000) mm/minTool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mmmax. tool length:300 (opt. 220) mmmax. tool weight:8 (opt. 4) kgtotal power requirement:30 (opt. 80) kvaWeight approx.:12 tMachine size (LxWxH):5026x4276x3210 mmpositioning accuracy:0,014 mmrepeating accuracy:0,008 mmCNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 linear scales:Heidenhain/Fagor tool mea ...