general inventory used for sale

Description: Workbench with drawer block Dimensions of the entire drawer unit 66 x 40 x 35 cm. Dimensions of the individual drawers 59 x 35 x 4 cm. Length 1560 mm Width 760 mm Height above floor 880 - 920 mm Weight 70 kgweight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 500 mm

Description: Hand taps in the following sizes M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20. Dies in the following sizes M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20. Incl. Die holder and tap wrench. See picturesApprox. Onsite Dimension. (l x w x h): 530 x 280 x 140 mm, weight approx.: 8 kg ... more information

Description: Total dimensions including back panel 115 x 61 x 140 cm. Internal dimensions of the top 2 drawers 44 x 40 x 9 cm. Inner dimensions of the lower drawer 92 x 40 x 9 cm. Lower shelf dimensions 115 x 65 cm. Dimensions of the tool board with holes for hooks 115 x 50 cm. LED fluorescent beam width 50 mm. Power of the LED fluorescent tube 9 watts. Length 1150mm Width 610mm Height above floor 910 mm Table load max. 450 kg Dimensions L x W x H 1170 x 640 x 135 m Weight 47kgweight approx.: 47 kg, Approx. Onsite Dimension. (l x w x h): 1,170 x 640 x 135 mm

Description: Workbench with 8 drawers and solid wood worktop Dimensions 1200x600x25mm Drawer dimensions (internal) 430 x 400 x 110 mm Length 1200mm Width 600mm Height above floor 860 mm Dimensions L x W x H 1200 x 600 x 400 m Weight 49kgweight approx.: 49 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 600 x 400 mm

Description: Tapping machine included: Machine base frame Footswitch vice different tools see pictures Thread diameter M5 - M10 mm Tool speed 320 - 1600 rpm Table size 330 x 290 mm Projection 215 mm Operating voltage 380 V Total power requirement 0.55 kW Machine weight approx. 300 kg Space requirement approx. 1.2 x 0.8 x 2.0 mApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm, weight approx.: 300 kg

Description: Volume 1500 liters max. pressure 11 bar Year of construction 2017 see picturesApprox. Onsite Dimension. (l x w x h): 900 x 900 x 2,750 mm, weight approx.: 450 kg ... more information

Description: ratchet case Nuts up to 50 mm see picturesApprox. Onsite Dimension. (l x w x h): 400 x 300 x 100 mm, weight approx.: 20 kg ... more information

Description: Hand Taps sets. M2 · 0.3 / 0.5 · M3 / M4 × 0.7 / 0.8 × M5 / M6 0.75 × M6 x 1 / x 0.75 M7 / M8 x 0.75 / M8 x 1 / M8 x 1.25 M9 x 0.75 / 1 x M9 / 1.25 x M9 / M10 x 0.75 / 1 x M10 M10 x 1.25 / 1.5 x M10 / M11 x 0.75 / 1 x M11 / M11 x 1.25 1.5 x M11 / M12 x 0.75 / 1 x M12 / M12 x 1.5 / 1.75 x M12 X 1 M14 / M14 x 1.25 / 1.5 x M14 / M14 x 2 / x 1 M16 M16 x 1.5 / 2 x M16 / M18 x 1.5 see picturesApprox. Onsite Dimension. (l x w x h): 400 x 300 x 80 mm, weight approx.: 8 kg

Description: Tool trolley with 8 drawers, 6 of which contain tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and detectable. - The tool included is made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the Tool trolley is a stable worktop made of polypropylene Plastic. - The tools contained in the workshop trolley are made of chrome vanadium steel is stored in styrofoam/foam inserts. + Drawer 1: - 1/4' inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm - 13mm Ratchet, universal joint, extension. - 3/8' inches: 10 nuts from 10mm to 19mm, 11 long nuts from 8mm to 19mm Ratchet, universal joint, extension. - 1/2' inch: 17 nuts from 10mm to 30mm, 9 long nuts from 10mm to 24mm Ratchet, universal joint, ext ...

Description: Pneumatic impact wrench set 1/2 ' 10 pcs. Nuts in 9, 10, 11, 13, 14, 17, 19, 22, 24 and 27 mm 1 pc. 1/2 'extension rod 1 pc. 4 mm Allen key In the storage case Air consumption at 6 bar 130 l / min Operating pressure 6.3 bar Torque 550/685 Nm Weight 2.5 kg Dimensions L-W-H 430 x 350 x 100 mmApprox. Onsite Dimension. (l x w x h): 430 x 350 x 100 mm, weight approx.: 2,5 kg

Description: Low-noise professional 50 liter compressor Noise level approx. 40 - 45 DB (A) This compressor is supplied as standard with: Safety valve, pressure reducing valve, pressure gauge, coupling and Drain valve below. Delivery pressure 8 bar eff. Delivery rate 200/175 L / min Boiler volume 50 liters Machine weight approx. 77 kg. Number of cylinders 4 pcs. Motor 230V / 1.5KW Dimensions L-W-H 580 x 780 x 820 mmApprox. Onsite Dimension. (l x w x h): 580 x 780 x 820 mm, weight approx.: 77 kg

Description: Transport chassis consisting of: 2 armored rollers each with 2t load capacity 1 piece chassis 4t load capacity see picturesApprox. Onsite Dimension. (l x w x h): 600 x 400 x 200 mm, weight approx.: 30 kg ... more information

Description: compressor Delivery pressure 8 bar eff. Delivery quantity 250/350 L / min Boiler capacity 200l / 10bar l / bar Machine weight approx. 105 kg. Number of cylinders 2 pieces Motor 230V / 2.2KW Dimensions L-W-H 1140 x 510 x 920 mmApprox. Onsite Dimension. (l x w x h): 1,140 x 510 x 920 mm, weight approx.: 105 kg

Description: Contents consisting of files, clamping jawsApprox. Onsite Dimension. (l x w x h): 760 x 500 x 1,000 mm, weight approx.: 90 kg ... more information

Description: Contents consisting of various milling cutters, tool holders, collets, clamping elements, various clamping devices from the manufacturer KIPPApprox. Onsite Dimension. (l x w x h): 730 x 700 x 1,000 mm, weight approx.: 150 kg ... more information

Description: Contents consisting of turning steels, insertsApprox. Onsite Dimension. (l x w x h): 1,000 x 700 x 1,100 mm, weight approx.: 150 kg ... more information

Description: maximum capacity 6.3 ton , gauge approx. 20,530 mm , with radio control DISMOUNTING AND LOADING OF THE CRANE WILL BE POSSIBLE ONLY AFTER THE COMPLETE REMOVAL OF THE MACHINERY AND MATERIAL BELOW (expected date September 2024)Crane control: radio remote control, maximum capacity: 6,300 kg, Approx. Onsite Dimension. (l x w x h): 21,500 x 3,300 x 1,500 mm, weight approx.: 12,500 kg

Description: Lot composed of: 1 HP proliant ML 350 Gen 10 server with Intel xeon processor without key for faceplate , 1 EB ELECTRONIC uninterruptible power supply EBK Active 1800Approx. Onsite Dimension. (l x w x h): 600 x 700 x 1,150 mm, weight approx.: 50 kg ... more information

Description: overhead crane capacity 3.2 ton gauge approx. 20,530 mm , remote control with radio control DISMOUNTING AND LOADING OF THE CRANE WILL BE POSSIBLE ONLY AFTER COMPLETE REMOVAL OF THE MACHINERY AND MATERIAL BELOW (expected date September 2024)Crane control: radio remote control, maximum capacity: 3.2 kg, Approx. Onsite Dimension. (l x w x h): 21,500 x 3,300 x 1,200 mm, weight approx.: 10,000 kg

Description: composed of 14 tires and 4 rimsApprox. Onsite Dimension. (l x w x h): 1,200 x 1,600 x 1,000 mm, weight approx.: 150 kg ... more information