Manufacturer:
(Category: 1900)
Description: Capacity 1000 kg, on castorsApprox. Onsite Dimension. (l x w x h): 1,500 x 1,100 x 1,700 mm, weight approx.: 80 kg ... more information
Description: Refrigeration dryer Technical data see picturesApprox. Onsite Dimension. (l x w x h): 800 x 600 x 650 mm, weight approx.: 65 kg ... more information
Description: Completely overhauled in 2022: New high-voltage generator, high-voltage cable and insulator Electronic control board has undergone a general overhaul by the manufacturer Maintenance carried out in the form of a general overhaul of the X-ray tube. All seals and the target were replaced.  , 180 kV / 20 W high-performance microfocus tube with detection capability of up to 0.5 µm. Brilliant live images thanks to a highly dynamic, temperature-stabilized GE DXR digital detector with 30 images per second (frames per second) 1000 x 1000 pixels Resolution 200 x 200 micrometers. phoenix diamond | window, up to twice as fast data acquisition with the same high image quality Xact version MIL 9.0 Build 12 Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
Description: Max. Pressure: 16 bar Volume: 250 l The compressor has always been serviced and maintained, papers availableApprox. Onsite Dimension. (l x w x h): 600 x 1,800 x 1,150 mm, weight approx.: 465 kg ... more information
Description: for pressurized gas cylinders Lock defectiveApprox. Onsite Dimension. (l x w x h): 600 x 700 x 2,050 mm, weight approx.: 200 kg ... more information
maximum capacity: 50 kg, stroke: 1,000 mm, Approx. Onsite Dimension. (l x w x h): 1,600 x 300 x 2,700 mm, weight approx.: 150 kg ... more information
Description: 64 pieces, load capacity approx. 2000 kg, load approx. 2,150 kg, tare approx. 122 kg, dimensions each 1250 x 850 x 2000Approx. Onsite Dimension. (l x w x h): 13,000 x 2,000 x 2,300 mm, weight approx.: 7,800 kg ... more information
Description: 64 pieces, load capacity approx. 2000 kg, load approx. 2,150 kg, tare approx. 122 kg, dimensions 1250 x 850 x 2000 mm eachApprox. Onsite Dimension. (l x w x h): 13,000 x 2,000 x 2,300 mm, weight approx.: 7,800 kg ... more information
Description: DEMAG 500 KG overhead crane and 2 orange rails . length about 8,500 mm excluding yellow support structureApprox. Onsite Dimension. (l x w x h): 8,500 x 5,000 x 1,000 mm, weight approx.: 2,000 kg ... more information
Description: Load capacity 2500 kg, span 4196 mm, with manual floor operating device, Attention: without constructionApprox. Onsite Dimension. (l x w x h): 4,500 x 2,300 x 1,000 mm, weight approx.: 900 kg ... more information
maximum capacity: 2,500 kg, stroke: 4,000 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 800 x 3,200 mm, weight approx.: 6,000 kg ... more information
Description: Serial number: 323273/01 Load capacity: 4000 kg Gantry length: 4500 mm Incl. electric chain hoist from the manufacturer STAHLApprox. Onsite Dimension. (l x w x h): 4,700 x 3,400 x 4,200 mm, weight approx.: 3,000 kg ... more information
Description: Load capacity: 200 kg Operating hours: 364 Working height max :10m , Loading with Access ramp Approx. Onsite Dimension. (l x w x h): 2,800 x 1,000 x 2,000 mm, weight approx.: 2,750 kg ... more information
Description: Payload capacity 4600 kg , Total weight 7000 kg , Last test in July 2013 , Air brakes , Brakes are currently locked With road approvalApprox. Onsite Dimension. (l x w x h): 2,450 x 8,300 x 1,500 mm, weight approx.: 2,400 kg ... more information
Description: including various crane ropesweight approx.: 120 kg, Approx. Onsite Dimension. (l x w x h): 1,250 x 700 x 840 mm ... more information
Description: different years of constructionApprox. Onsite Dimension. (l x w x h): 570 x 410 x 1,170 mm, weight approx.: 40 kg ... more information
DYNAJET 500th HELI with approx. 800 operating hours, price 38.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mini ...
Ultrasonic cleaning system FiSA VST 2000/P, YOC 2014 - Ultrasonic power: 8.4 kW - Component weight max.: 5000 kg - Volume: 2000 l - Heating capacity: 51 kW - Internal useful dimensions L/W/H: 1600/ 1000/ 1250 mm - Space requirement (W x D x H): 12 x 3.2 x 2.1 m - Total power: 60 kW - Condition: very good details Mould cleaning for plastic injection moulding, extrusion, elastomere, die casting, core boxes, moulds; well-kept facility, was hardly in use
Description: max. load 230 kg, max. 2 persons, working height 11.6 m, platform 1140 x 800 mm, reach approx. 6900 mm, availability from end of October 2024Approx. Onsite Dimension. (l x w x h): 5,360 x 1,200 x 1,990 mm, weight approx.: 7,000 kg ... more information
Description: Column height 2600 mmmaximum capacity: 50 kg, stroke: 1,300 mm, Approx. Onsite Dimension. (l x w x h): 2,600 x 800 x 500 mm, weight approx.: 200 kg ... more information