presses used for sale

Working width: 3500 mmWorking height: 2300 mmNumber of cylinders: 4 St.Stable frame welded construction of thick-walledSpecial hollow profiles , sliding table and pressure beam with50 mm hole pattern .On the left side continuous abutment for grouting the wide ,lower abutment in 2 levels.Vertical pressing cylinder on specialty bar with one-quick adjustment with weight compensation in the 50 mm hole patternadjustable in height. Long sliding table ensure thecontinuous recording of high jacking forces .Fast, smooth width adjustment with ball bearingCarriage with central fixation in 50 mm hole pattern.Upper horizontal press cylinder infinitely adjustable in height andequipped with counterbalance .Lower horizontal pressing cylinders with bore fortwo abutments levels without weight compensation .Abutment and pressure plate depth 100 mmMachine controlled electro -hydraulic with 2 pieces vertical ...

Working width: 3500 mmWorking height: 2650 mmNumber of cylinders: nach Wahl St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Working width: 120 mmWorking height: 1200 mm: 6000 mmNumber of cylinders: 12 St.1 pcs Laminating type SLV - H - 6.0 - 1.2 - 120 - 6V - IISpecifications- Working dimensions: Length: 6000 mm Height: 1200 mm Verleimdicke: 40 - 120 mm- Number of cylinder pressure: 12- Cylinder type: Ø 63 x 120 mm- Max. Force per cylinder pressure: 50 kN- Specifischer pressure: 7.4 kg / cm2- Number of hold: 6- Cylinder type: Ø 40 x 150 mm- Max. Force per hold-down: 20 kN- Number of section: 3- Max pressure: 160 bar.- Power: 3.0 kW- Pump flow: 10 l / min- Each impression cylinder and the hold-separate absperbar- Manual control with (Italian) hydraulic valves- Equal pressure in all sections- Parkiplatz for the (2x3) holding-down device to each side of the press- The dismantling pressing bar, 2 pcs, each 3 m long(. According to Manufacturer SpecificationsThe data for this ad was created with ModulMWS  ...

Working width: 3500 mmWorking height: 2300 mmNumber of cylinders: 4 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

pressure: 400 tstroke: 300 mmtable surface area: 1200 x 700 mmram surface: 1200 x 700 mmdayligth: 500 mmadjustment of stroke: 300 mmreturn capacity: 348 kNcapacity of ejector: 100 kNejector stroke: 100 mmtotal power requirement: 65 kWweight of the machine ca.: 28 tdimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m= Frame pressAccessories: tool changing table- next safety inspection according to stamp 05/2021 -- with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: 371kg. ... more information

Working surface: 2150x1150mm, pressing height: 300mm, pressing force: 50t, connected load: 2.4kW, length: 2500mm, width: 1150mm, weight: 1.8t. ... more information

Working surface: 2200x1250mm, pressing force: 65t, connected load: 1.4kW, length: 2540mm, width: 1450mm, height: 1950mm, weight: 2.6t. ... more information

Inclination: 15°, an on-site visit is possible. ... more information

Capacity: 250 - 400 ton V ? Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg

Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0

Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0

gebr. Kantenanleimmaschine Fabrikat: Format 4 Typ: Tempora 60.12/2 E Baujahr: 2020 -unüberholt- ohne Gwährleistung e- Motion Steuerung Oberer Druckbalken: - Druckbalken aus geschweißter Verwindungsstreifer Stahlkonstruktion. Motorisch gesteuert einstellbare Werkstückhöhe 8-60 mm über e-motion Steuerung. - Glatte,zweireihig versetzt angeordnete Oberdruckrollen, die dafür sorgen,dass eine gleichmäßige Druckverteilung auf das Werkstück stattfindet. - Werkstückabstandüberwachung durch eine Ampel. - Drehteller Kantenmagazin für Rollenkantenmaterial 0,4-3 mm: - Ø des Drehtellers:800 mm - Streifenmagazin für 12 Stück: 10 mm Kanten - Kantenzufuhrung für Rollen- und Streifenmateral tempora Serie - Pneumatisch gesteuertes, Teflonbeschichtetes Leimaggregat für 1,5 Kg EVA Granulat - mit synchronisierter Leimrolle und Schnellwechselsystem. Geeignet f ...

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0

New longitudinal veneer splicer Brand: CASATI Type: LINEA 1250 Technical details: Arm length 1.250 mm Veneer thickness 0,4 - 4 mm Min. veneer length 350 mm Min. veneer width 45 mm Glue for pre-gluing: Urea and PVA Glue for integrated gluing: Urea Feed speed 10 - 40 m/min. Heating area length 1.250 mm Total connected load 7,4 kW Power consumtion approx. 6 kw Compressed air consumption 5 Nl/min Compressed air pressure 6 - 8 bar This machine permits the longitudinal splicing of veneer sheets by applying glue on their edge. Immediately afterwards the veneer will be passing through a heated zone in order to activate the glue reaction: the glue will be hardening thus bonding the veneer sheets. The integrated glueing device allows the joining by one only process. Its also possible to bond pre-glued veneer sheets Option for an extra charge: Cooling device for the glue po ...

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

Device for the final assembly of grave crosses., Weight: 250 kg, connection: pneumatic, 6 bar ... more information

Hydraulic frame press Polzer HKR 35/250., Working width: 4,000 mm, working height: 2,500 mm. ... more information

Four-level gluing press Altec MVP 6/16 for pneumatically gluing solid wood workpieces in 8 positions including steel press attachments., workpiece length: max. approx. 2,500 mm, Workpiece width: max. approx. 800 mm, workpiece height: max. approx. 70 mm ... more information

Obel Pedersen type T30L high-frequency press for quickly gluing wood using high-frequency technology. The glue will The moisture is quickly removed and thus ensures a short pressing time. Including automatic Loading unit and scissor lift table in the outlet., glue: Dispersion glue (white glue), phenol resocin glue, urea glue and melamine glue, pressure: 42 tonnes, Included: new band, Further technical data: On demand