presses used for sale

pressure: 400 tstroke: 300 mmtable surface area: 1200 x 700 mmram surface: 1200 x 700 mmdayligth: 500 mmadjustment of stroke: 300 mmreturn capacity: 348 kNcapacity of ejector: 100 kNejector stroke: 100 mmtotal power requirement: 65 kWweight of the machine ca.: 28 tdimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m= Frame pressAccessories: tool changing table- next safety inspection according to stamp 05/2021 -- with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: 371kg. ... more information

Working surface: 2150x1150mm, pressing height: 300mm, pressing force: 50t, connected load: 2.4kW, length: 2500mm, width: 1150mm, weight: 1.8t. ... more information

Working surface: 2200x1250mm, pressing force: 65t, connected load: 1.4kW, length: 2540mm, width: 1450mm, height: 1950mm, weight: 2.6t. ... more information

Inclination: 15°, an on-site visit is possible. ... more information

Capacity: 250 - 400 ton V ? Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0

gebr. Kantenanleimmaschine Fabrikat: Format 4 Typ: Tempora 60.12/2 E Baujahr: 2020 -unüberholt- ohne Gwährleistung e- Motion Steuerung Oberer Druckbalken: - Druckbalken aus geschweißter Verwindungsstreifer Stahlkonstruktion. Motorisch gesteuert einstellbare Werkstückhöhe 8-60 mm über e-motion Steuerung. - Glatte,zweireihig versetzt angeordnete Oberdruckrollen, die dafür sorgen,dass eine gleichmäßige Druckverteilung auf das Werkstück stattfindet. - Werkstückabstandüberwachung durch eine Ampel. - Drehteller Kantenmagazin für Rollenkantenmaterial 0,4-3 mm: - Ø des Drehtellers:800 mm - Streifenmagazin für 12 Stück: 10 mm Kanten - Kantenzufuhrung für Rollen- und Streifenmateral tempora Serie - Pneumatisch gesteuertes, Teflonbeschichtetes Leimaggregat für 1,5 Kg EVA Granulat - mit synchronisierter Leimrolle und Schnellwechselsystem. Geeignet f ...

Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0

Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0

New longitudinal veneer splicer Brand: CASATI Type: LINEA 1250 Technical details: Arm length 1.250 mm Veneer thickness 0,4 - 4 mm Min. veneer length 350 mm Min. veneer width 45 mm Glue for pre-gluing: Urea and PVA Glue for integrated gluing: Urea Feed speed 10 - 40 m/min. Heating area length 1.250 mm Total connected load 7,4 kW Power consumtion approx. 6 kw Compressed air consumption 5 Nl/min Compressed air pressure 6 - 8 bar This machine permits the longitudinal splicing of veneer sheets by applying glue on their edge. Immediately afterwards the veneer will be passing through a heated zone in order to activate the glue reaction: the glue will be hardening thus bonding the veneer sheets. The integrated glueing device allows the joining by one only process. Its also possible to bond pre-glued veneer sheets Option for an extra charge: Cooling device for the glue po ...

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

Glue star or rotating gluing press Hess Rotor for gluing wood to form panels with 8 pressing surfaces (1,250 mm each). Incl. glue application machine and lots of inlay wood with different dimensions., working area: 2,500 x 1,100 x 80mm, pressing surfaces: 4 x 2, Pressing force: 20,000 N, Hold-down: 4 x 4

Burkle Membrane Press Machine has 3 tables Machine has been serviced recently Machine is in good working condition ... more information

Wemhöner Wood Press Size : 250 cm x 120 cm Double table Machine is in a good working condition ... more information

I will sell the membrane press Friz optimat MFP with a boot device. ... more information

Machine dimensions: 2900 x 1200 x 2000 mm Press dimensions: 2000 x 500 mm Press thickness: 20 – 350 mm Electric power: 14Kw/h, 40A Voltage frequency: 400V / 50Hz / 3P + N + PE Pressing power: 3200kg Production capacity: 1000 – 3000 m² per day Weight: 1000kg Mold weight: 100kg Emergency stop button: Yes

Carousel press with hydraulics from the manufacturer LISY - DVOŘÁK Working length: 2200 mm Working width: 1200 mm Maximum wood thickness: 60 mm Max pressure: 100 bar ... more information

Brick press with self-cleaning system A-200 Bogatyr2” Productivity 480 bricks per hour Total pressure of hydraulic cylinders: maximum 240 tons (top of them) Product size, max 270x250x110/90 mm Operator panel 7 inch display Built-in help and hint system Automatically check the density and height of the brick in each cycle Control of brick parameters for rejection in each cycle Yes Automatic adjustment to eliminate defects in the next cycle Yes Overall dimensions, no more than 2200x1300x2400 mm Weight of the press with oil station, no more than 3.2 tons

-Exhibition machine----------- Technical data ----------Briquette : 60 mm, hydraulic power unit 3 kW: 140 bar, voltage: 400 V, frequency: 50 Hz, fuse: 16 A, power approx.: 20-35 kg/h, weight approx.: 300 kg- Simplest handling- Hydraulic control- Briquette diameter 60 mm- Briquette length adjustable as desired (max. 60 mm)- Motor equipped with motor protection switch and emergency stop- No electronic components such as controllers, sensors and sensors or complicated controls- Large storage container- Briquette tongs tempered- Press rod replaceable- Presses without the addition of additives- Thanks to the pre-compressor, even voluminous chips can be processed- No adjustment work or monitoring of the pressure necessarynew exhibition machine