gluespreader machines used for sale

Glue application machine Brand: OMMA Type: FSC 600 New machine Technical details: Useful working width mm 600 Maximum working thickness mm 90 Working speed mt/min 19 Height of working level mm 905 Spreading rollers Ø mm 185 Standard grooving lines/inch 14 Installed power kW 0.37 Colour Ral 7035 Command side (compared to working direction) Right Standard voltage v 400/50/3 Technical equipment: - Spreading rubber rollers coated with grinded surface. - Thickness graduate indicator. - Top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation. - Parallelism regulation between spreading rollers. - Rollers protection with security plate and foot control in front of the machine that stop immediately the machine if activate. - Security front foot barrier. - Steel zinc collecting tank of the cleaning water. - E ...

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Year: 2018 Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge of chain conveyor) The work ...

Semi automatic edge bander Make: VITAP Type: FUSION 2.0 New machine Technical datas: - For straight and shaped pieces 10 - 60 mm - Edge thickness 1-3 mm - Tefloned gluing station with quick disassembly system - Glue and tape application on big and small shaped panels - Equipped with glue pot with 1 Kg capacity - 1 glueing roller - 2 rollers to copy the shape of the piece - 1 tilting support roller to enable the exit of the panel after banding - Glue application amount is adjusted via knob - Set up of the glue temperature - Automatic guillotine for coiled material up to 3 mm x 45 mm THREE KIND OF WORKS: - By Encoder - By Encoder + laser - By Pedal cut Panel materials - Solid wood - Chipboard (laminated or not) - Multilayer material - MDF or HDF (laminated or not) - Panel dimensions range: min 50x200mm max 1000x2000 mm - Shaped pieces Dimensions ran ...

Contour edge bander Fabrikat: VITAP Type: BC91 EVO Demonstration machine Technical data: - For straight and curved pieces (convex and concave) - To glue pieces thickness 10-60 mms., in PVC, melamine, veneer, plastic laminate and solid wood - 2 glue spreading rollers - Cutting guillotine up to 3 mm. thickness - Encoder for high precision cutting of the tape ( for shaped closed pieces) - Band length measuring by means of a digital electronic counter - Tape cut by foot pedal to edge just one piece - End switch tape cut (only for straight pieces) - Feeding speed adjustable from 3mt to 20mt per min. - Solid Phenolic table easy to clean and with no transmission of heat - Manual / Automatic band cutting device - Glue pot (kgs. 3), with electronic adjustable heating system -Tilting table 0°-45° - Standard accessories - CE standards

Contour edge bander Fabrikat: VITAP Type: BC91 EVO New machine Max. flexibility by means of a smart construction - For gluing chamfers on rectangular or formed workpieces - Tilting table 0°-45° - To glue pieces 10-60 mm thickness - Edge material: PVC, melamine, veneer, plastic, laminate, solid wood - Nr. 2 glue spreading rollers - Cutting guillotine up to 3 mm thickness - Glue pot (kg 3), with electronic adjustable heating system - Band length measuring by means of a digital electronic counter - Tape cut by foot pedal to edge just one piece and measuring edge length - Feeding speed adjustable from 7m to 20m per min. Solid Phenolic table - Easy to clean - With no transmission of heat - Plastic cups to raise the piece above the table - 2 kg vitap glue 280.00 for test - CE standards Optional: - Enlarged tape plate 800 mm - Semi-automatic end-c ...

Contour edge banding & trimming machine Make: VITAP Type: SMART-3 New machine - With swivable trimming station - For straight and formed workpieces (convex and concave) - 1 glue spreading roller for 10-60 mm panel thickness - Guillotine to cut bands up to 3 mm thickness - edge 0,5-3mm 2 tape feeding speed (3 m/min or 7 m/min) -Glue pot 1kg capacity - Tape plate Ø=520mm Solid Phenolic table - Easy to clean - With no heat transmission - Electronic temperature control - Foot pedal command for the guillotine Tilting trimming unit - with 1 high frequency motor HP 0.75 (kw0,55) - 1 cutter Head with 2 knives r1mm/r2mm/r3mm - Support tape plate Ø 600 mm - Semi-automatic end-cutter with motor 0,5 kw and blade Ø=125 mm - Working table 400 x 300 mm. - CE standards. Optional available for an extra charge: - Cutter (without knives) - Set ...

Hot melt contour edge bander Make: VITAP Type: SMART New machine For straight and shaped (convex or concave) pieces - To glue pieces 10-60 mm thickness, - PVC / melamine / veneer / plastic / laminate / solid wood - Edge 0,5 - 3 mm - 1 glue spreading roller 10-60 mm thickness - Guillotine to cut bands up to 3 mm thickness - 2 tape feeding speed (3m/min or 7 m/min) - Tape plate d=520mm - Glue pot 1kg capacity Solid Phenolic table - Easy to clean - No transmission of heat - Plastic cups to raise the piece above the table. So the panel weight is not focused on the glued band. - Electronic temperature control - Foot pedal cutting system - CE standards Optional for an extra charge available - Vitap glue 2 kg - Vitap glue 10 kg

PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (

Oscillating buffing unit HOMAG  ... more information

Spiked roller WEHRMANN for better gluing on solid wood / plywood  ... more information

Stripe breaking device IMA  ... more information

Edge magazine IMA - 6x - 24x fold magazine - 550 or 800 mm coil diameter Several versions available from stock. Price on request.  ... more information

Buffing unit - 1 motor  ... more information

PU preheater IMA 2,5 kg  ... more information

Radius profile scraper IMA 08.263  ... more information

Radius profile scraper IMA Type: 08.515  ... more information

Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit Possible execution: - spindle drive: for one or two gluing units - bayonet adapter: for one or two gluing units

The workpiece return transport consists of an air cushion table with pneumatic tilting movement, complete with pusher, return conveyor with motorised belt and a not-driven roller conveyor. The panel comes out of the edge banding machine onto the air cushion table which tilts over and drops it, with the aid of the pusher, onto the return belt, situated at a lower level. The air cushion table has transfer belts to takeover the parts from the edge banding machine. Dimensions of air cushion table 1.200 x 2.400 mm Belt width 1.300 mm Installed power 3 kW workpiece return transport is deliverable for basic edge banding machine length 3.500 up to 12.500 mm

Granulate supply Make: ADOLPH Type: G-Trans 25 for continuous granulate supply on edge banding machines technical details: System for a machine line with 4 pre-melters (standard) Pos.1.1 1 basic unit for bag-emptying G-Trans® 25 Portal for Big-Bags with hanging emptying: Solid steel frame in 40 mm square-tube profile, torsion-stiff welded construction, main pillars with base plate for dowel-anchorage. Solid steel welded construction in square-tube profile, with fork-lift lugs, 4 hooks and tapered guide pins for easy touchdown on the portal. Sufficient stability for 1.500 kg weight. Supporting area with bars and stacking corners. Material container in powder-coated steel, with cone for free-flowing bulk materials. Filler plug diam. 300 mm. Filler opening 350 x 350 mm with sliding cover. 5/8 plugs for granules transport NW 25 Stack frame  ...

Description: - Hot gluing of pre-glued strips for finishing linear and shaped panels - Main motor 3.59 Kw -Protection against accidental burns - Height adjustable edge guide - Pre-tape rubber roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.4 - 2 mm - Min/max panel thickness 12/43 mm - Working speed: 7 m/minApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 485 kg