gluespreader machines used for sale

Description: CEHISA EP-2 Manual edgebander Serial number 1770 Maximum gluing height: 60 mm Workpiece thickness from 10 mm up to 50 mm It does not have a shear to cut the edge ! Hot melt glueing unit Adjustable temperature from 50 to 300º Motor power: 0.25 HP Three-phase connection With wheels for easy transport  ,serial number: 1,770, Approx. Onsite Dimension. (l x w x h): 1,040 x 820 x 950 mm, weight approx.: 100 kg, Serial Number of Manufacturer: 1,770

Description: Serial Number: 00.230.017 Composed by  , Gluing unit Trimming unit , Profiling unit , Installed power: 3kwtotal power approx: 3 kW, Approx. Onsite Dimension. (l x w x h): 2,300 x 1,950 x 1,600 mm, weight approx.: 405 kg ... more information

Description: Serial Number:  ,86 8503 Gluing unit Prensor unit de 3 rodillos , End trimming unit ,  ,0,3kw 12000 rpm Top and bottom triming unit power: 1,125kw 12000rpm tilting 45º Profiling unit Scraping unit , Buffing unit:  ,0,37 kw 1500 rpm serial number: 86 8503, Approx. Onsite Dimension. (l x w x h): 5,500 x 1,110 x 1,500 mm, weight approx.: 1,440 kg

Description: for roll and strip material , with SIMATIC 55 line control. Machine processes the workpieces in forward and return motion, therefore only one person is required to operate it Workpiece height (max.) 50 mm Edge thickness (max.) 12 mm Operating hours 1,464 h Machine number 00191 Total machine length: 4750 mm or 5600 mm with attachable extension Machine depth: 750 mm with extendable 2nd support from 0 to 1450 mm. Working height: 850 mm. Machine height: 1350 mm, cover hood open 1900 mm. Feed speed approx. 18 m/min (unchangeable). Connection for suction: 3x 100 mm connection diameter. Compressed air connection: min. 7 bar max. 10 bar. Connection: 3 / 8'. Operating voltage: 3 / N / PE / 380 V / 50 Hz. Nominal power: 7 kW. Rated current: 20 A. Supply cable cross-section: 4 mm². Fuse to be connected upstream: 25 A. Workpiece data: Workpiece projection: 37 mm (+ edge thickness) ...

Wood Her STREAMER 1057 FU + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for setting the units Fully automatic edge magazine for roll and strip goods Glue application station GLU-JET cartridges + PU gluing Adhesive application using nozzle technology Workpiece height 6-60 mm car. Glue height adjustment High-quality 3-roll printing unit, 1st roll motorized Cross-cut unit pneum. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copy unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper carriers Surface Scraper Unit - Finish Spraying Device - PU Machine with all machining tools Machine is WORKSHOP TESTED in TOP CONDITION from stock Lieboch

Holz Her Sprint 1317 FÜ + PU Heavy version - edge thickness 0.4 - 8 mm PLC Screen Control Edgecontrol Power PC Pre-milling unit for joining in front of the gluing part 1961 Mot. Inlet ruler Fully automatic edge magazine for roll and strip goods MOT 1903 Glue application station cartridges + PU gluing 1905 Multi Adhesive application using nozzle technology Workpiece height 6-50 mm car. Glue height adjustment Printing unit pneumatic 1913 Cross-cut unit 1918 for rolls and strips up to 8 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit 1826 MOT 4 NC axes, flush milling 8 mm, radius milling - chamfer milling - 15° Shape milling unit 1832 Rounding of corners up to edge thickness 3 mm in continuous flow Scraper unit for chamfers and radii with 2 scraper carriers - pneum. Pneumatic engagement and disengagement Surface Scraper Unit  ...

Code: 0279 Brand: BIESSE Model: AKRON 430/T - CE Standard Automatic edge bander with grinding unit for wood, pvc, veneer, abs, furniture edges and other materials - CE Standard Technical data: Edge thickness 0,4 - 8 mm Panel height mm 60 Min/max panel length mm 140/3200 Panel width min mm 85 Tracking track speed 12 mt/min Manual height adjustment with SIKO display Grinding unit: N° 2 milling cutters diameter mm 80 F30 H75 - Skid copying devices - Motors Kw 1,8 each - Rpm 12000 Gluing unit: Glue pot capacity kg 2 - Interchangeable pot - Pressure roller: Large roller diameter mm 100 - Small rollers diameter mm 60 - Glue spreader roller drive motor 0,37 Kw End cutting unit: N° 2 motors 0,50 Kw each - 12000 rpm - Motor inclination 0-15° - Max tool mm 115 - Skid copying devices Finishing Trimming Unit: N° 2 motors 0,65 Kw each - 12000 rpm - Manual motors inclination  ...

SCM edge banding machine model OLIMPIC K600 T-ERL composition: – STARTOUCH electronic control, with touch-screen video – useful panel thickness from 8 to 60 mm – roll edge thickness from 0.4 to 3 mm – solid edge thickness up to 8 mm – variable feed speed up to 16 m/min – upper presser with wheels – overall dimensions approx. 5.3 x 1.1 x h=1.6 m – machine according to CE standards, year 2013 Operating units: – RT-E grinding unit with 2 motors – VC/6 gluing unit with glue pot and upper pre-melter – K/SEL double tilting trims – RI/100 tilting trimmers – ROUND 2M rounding unit with 2 motors – RAS/K pvc/abs edge scraper unit – RCL glue scraper unit

Min. working width 60 mm Min. working length 140 mm You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 19.1.1.  ... more information

Description: FRAVOL manual edgebander model A16/AC for pre-glued edgesApprox. Onsite Dimension. (l x w x h): 750 x 650 x 1,000 mm, weight approx.: 100 kg ... more information

Description: HIRTZ manual edgebander model B164 SUPER for pre-glued edgesApprox. Onsite Dimension. (l x w x h): 1,000 x 500 x 200 mm, weight approx.: 20 kg ... more information

Description: BIMATIC edgebander model SYNCRO 4105.8 : - control panel with electronic control - panel thickness from 8 to 45 mm - feed speed 10 mt/min - overall dimensions approx. 5.1 x 1.2 x h=1.6 m - Operating groups: - gluing unit with: hot-melt glue tank with rapid heating (approx. 5/6 min.) loader and cutter for roll material from 0.4 to 3 mm loader for solid strips up to 8 mm - double vertical end trimmers, hp motors 0.3+0.3, tiltable 0 - 15° - overlapping trimmers, non-tilting, hp motors 0.5+0.5 - trimmers inclinable 0 - 25°, hp motors 0,5+0,5 - edger with 1 hp motor 0,5 - straight edge sander, hp motor 2Approx. Onsite Dimension. (l x w x h): 5,100 x 1,200 x 1,600 mm, weight approx.: 1,360 kg

Hebrock AKV3005DK-F edge banding machine with joints, corner copying and two scraper blades. Very neat machine from small business in excellent condition. Touch-screen interface with PLC control for easy operation of the machine, 12 operating programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support, optional equipment extendable by 950mm Suction connection 80 +140mm Aggregates: Quick-change basin with glue outlet, there are two glue basins available, both of which are included in the scope of delivery (1 basin was used for EVA glue and one for PU glue), the PU glue basin is practically as good as new, was purchased only for one order. Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness ma ...

Description: Quick melt glue pot Heated infeed fence Roll trimmer: pneumatic up to 3 mm HF End trim saw 1st Top/Bottom trimming station 2nd Top/Bottom trimmimg station undercarriageedge magazine with: 1 -fold roller, edge thickness: 0.4 - 5 mm, workpiece thickness: 40 mm, workpiece pre heater: ✔, snipping unit: ✔, fine trimming unit: ✔, total power approx: 11 kW, packing measure approx (l x w x h): 4,000 x 1,800 x 1,600 mm, Approx. Onsite Dimension. (l x w x h): 3,600 x 1,400 x 1,200 mm, weight approx.: 690 kg

Description: Technical data: tape thickness: 0.3 - 3 mm material thickness: 8 - 60 mm conveyor speed: 18 - 25 m / min The edgebander consists of the following aggregates: • 2 pre-milling machines for material processing (3 kW each) • material heating lamp • glue heating vessel • container with roller for applying glue to the material • push rollers • 2 stripping units (each 0.8kw) • 2 units with radial cutters for processing the upper and lower edges (1.5 kw each) • 2 postforming aggregates • 2 cyclings • polishing brushes with liquid injectors The edging is fully automated, which means that the height of the beam, pre-milling machines, rollers and all the settings of the cutter depending on the thickness of the material and the strip are adjusted on the main monitor.serial number: 0-200-19-0792, edge thickness: 0.3 - 3 mm, workpiece thickness: 8 - 60 mm, Approx. On ...

Code: 0256 Brand: STEFANI Model: ACTIVA 1-73 - CE Standard Automatic edge bander with grinding unit for edges in wood, veneer, pvc, abs, furniture and various - CE Standard Technical data: Edge thickness min/max 0,6-25 mm Coil material thickness min/max 0,3-3 mm Min/max panel height mm 10-60 Min panel width mm 70 Automatic pressure bar lifting Feed speed variator 8-30 mt/min Controlled guide before grinding Group of 2 grinders for panel grinding - N° 2 motors - Suction mouth diameter 120 mm Glue tank pre-melting unit Gluing unit: N° 1 pneumatic pressure roller diameter 180 - N° 3 pneumatic pressure rollers diameter 100 Soundproof protection cabin Tilting end cutting unit - Diameter of blades mm 140 - Rpm 12000 Trimming unit: Tool diameter mm 80 - Motors Kw 0,75 - Rpm 12000 Bevelling unit : Tool diameter mm 80 - Motors Kw 0,75 - Rpm 12000 Rounding unit with 4 mo ...

 ... more information

 ... more information

Machine line Combiform / single-sided edge banding machine, consisting of: Feeding by means of 1 lifting table, 1 one-sided edge banding machine IMA, type: Combi-Form/K/I/R75/885/V/vR3, year of construction: 1997, comp. no.: 15018, with 3 conveyor belts, partly as a waste inclined conveyor belt, 1 brushing unit WANDRESS, type: BIQ 46/1/2200, year of construction: 2007, no.: 070838, 1 output roller conveyor SYSTEMATIC, type: AR-2, year of construction: 1997, machine no.: 97.052

SED edge banding machine, consisting of: 1 loading roller conveyor with tine pick-ups for forklift loading, 1 automatic rail transverse carriage QVW 38, 2 loading boxes, with lift tables and stacking portal or gantry loader WAMHOFF, type: Robomat-M-II-B, year of construction: 2001, machine no.: 111.10, 1 double-sided edge banding machine IMA WEHRMANN, type: Combima/FC/K/II/1410/V/VR/R/S02, year of construction: Ü99, machine no. 249/262, with marking spray unit REA JET HR, 1 brushing unit WANDRESS with humidification, 1 rotary cone station VENJAKOB, type: VDK/M, year of construction: 1999, machine no.: A99 09 001, with control WEHRMANN Micromat, 1 double-sided edge banding machine IMA, type: Combima/K/II/885/F/SR, year of construction: 1981 / Ü1999, machine no.: 149/268, 1 automatic drilling machine BIESSE, type: Techno FDT, year of construction: 2004, serial no.: 44258, weight: 5,890 k ...