fruits, vegetables, delicatessen, instant-meals machines used for sale

Pos. 2 - supply to the cooling tunnel, single-strand, equipped with cornering plastic flat-top chain, 82.5 mm wide; Scaffolding in stainless, Execution; complete with supports, railing brackets and guides as well as drive motor block in, Hollow shaft version, make SEW, type DRN®, 400/230 V, 50 Hz, IP55, energy efficiency class IE3;, the conveyor system is equipped with a pneumatic stopper/slider combination., This is how the rows are formed and pushed off., Item 3 – cooling tunnel, The system is based on a mat chain conveyor that is guided through a cooling zone., Technical specifications, Conveyor capacity: 750 pieces/h, Inlet temperature approx.: 80°C, Outlet temperature approx.: 35 °C, Average room temperature approx.: 10 °C, Cooling time approx.: 55 min, cooling belt, Usable chain width: approx. 1,200 mm, Usable chain length: approx. 4,200 mm, Inlet/outlet height: approx. 1,000 ...

Trade fair and exhibition machine, available immediately, Dynamic checkweigher to avoid underfilling and overfilling, reducing rejects and costs., IFS - fair production control,, Gross weighing range: 3,750 g, Running direction: L->R, Conveyor belt height: 985 - 1,085 mm (adjustment range), Throughput: approx. 200 pcs/min. depending on weight and packaging dimensions, Degree of protection: IP 65, Power supply: 230V 50Hz, Total length: approx. 1,660 mm, Infeed belt 1: side press belt 600 x 50 mm with central adjustment, Infeed conveyor 2: 300 x 150 mm, Weighing belt: 250 x 150 mm, Outfeed conveyor: 600 x 250 mm, knife-edge, Execution: 3, Emergency stop (electrical/, Pneumatics): 1, Wire identification: yes, 3 Color Light: Yes, Ethernet interface: yes, Line synchronization: yes, Sorting: High Speed Rejection Curve (towards the operator), Sorting table on site, gross weighing range: 3,750g, ...

Automatic tray sealing machine, make Sealpack, type 5V/G, year 2015, Plant for sealing sealable trays with a on the tray, coordinated top film, Set up on an octagonal A-PET tray, for 125 and 175 g content (134 x 100 x 23/40mm) with an oval base and octagonal lid., without filler and without labeller, • Can be operated from both sides, standard operating side here from the right!, • including vacuum and gas equipment, • including vacuum sensor, real value display in mbar, • including MAPpIus gas supply system (first-class from 200 mbar vacuum, Gas values in the pack, product dependent), Machine made of corrosion-resistant materials such as VA and plastic,, very stable column construction, integrated VA control cabinet splash water, protected, swiveling control panel All-round operability, Menu navigation can be stored over several programs, All switching, driving and sealing funct ...

Piston filling machine, make Engler, type K 18, year 1998, below level filling,, rotary machine with 18 filling stations,, Filling range: 100 - 1,000 ml,, Running direction - from left to right, Cylinder diameter: approx. 75 mm, cylinder length: approx. 320 mm,, set up for glasses (500 ml) with a diameter of approx. 85 mm,, 2 other formats available with a diameter of approx. 68 and approx. 95 mm,, Filling nozzle: length approx. 234 mm, filling opening diameter: approx. 17 mm., Output: up to max. 200 glasses per minute,, in use for mayonnaise,, Siemens S 5 - 100 U - control., power: up to a maximum of 200 glasses per minute, Dimensions / weight: L x W x H: approx. 3,900 x 1,900 (with control panel approx. 2,100) × 2,800 mm, filling area: 100 - 1,000 ml,

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punch crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover

Can seaming machine, semi-automatic, make Lanico, type V110 PH, year 2004 Ü, Can seaming machine, working semi-automatically,, Version: stainless steel,, was in use for beverage cans,, Processing range:, Diameter: from 42 to 163 mm, Height: from 26 to 300 mm, The machine was only driven in one shift and is in good technical condition, with pneumatic clamping and height adjustment., With storage - dispenser for the lid to be folded (56 mm), With 4 format sets for plastic cans with a metal closure with a diameter of 46, 50, 52 and 56 mm, power: up to 850 closures / hour

Potato processing line (French fries and split potatoes),, - French fries - line, Potato (French fries) processing line,, Output: approx. 220 kg per hour based on the end product,, French fries dimension 10x10x60 mm, consisting of:, feed bunker with stone catcher,, Carborundum - roller peeler, number of peeling rollers: 7,, Length of the peeling rollers: approx. 2,700 mm, new rollers, with interchangeable roll set for quick replacement of the rolls,, alluvial basin with discharge - elevator,, Bunker conveyor belt, make Marcelissen, type BNT 350-400, Knife block, make Marcelissen, 11x11 mm, Extension conveyor belt with small container, Marcelissen, Roller sorting table, make Marcelissen, type IR 2000-600, Narrow piece sorter, make Marcelissen, type FR4-1750, Flipmaster, make Marcelissen, type 902 MA, With swiveling supports, Continuous fryer make Riehle, type DLA 300 SC-3, 54 kW, vHi, Wit ...

used for filling sliced and blanched mushrooms,, consisting of:, MURZAN - pump, type MUS-10, drip tape, LEONHARDT - filling machine, type AG1 DPE 150, year 1997, with a filling station, FURUKAWA, Old - Rivers - Pre-made Bag Packing Line, Ty FVV-8-275E, takes pre-made bags from a magazine, opens them, is filled via the Leonhardt,, a slight vacuum is drawn and the pouch sealed., Functionality:, The product is pumped with the Murzan pump from a storage tank onto a drip belt., The water is fed back into the tub via hoses because it is needed for pumping., The drip belt is designed in such a way that up to 4 employees can stand on the right and left, for example to be able to carry out sorting work., The product then falls into the funnel of the Leonhardt filler. Here there is another possibility to let the residual water run off before dosing., The product is conveyed forwards via the integr ...

2-position pneumatic piston filling machine as an add-on dispenser, Filling volume: up to 250 ml, Output: up to 2,000 containers per hour, Frame: stainless steel, Dimensions: approx. L x W x H = 1,200 x 1,000 x 1,400 mm, Connection value: 380Vac, 50Hz,, Compressed air > 6 bar, Miscellaneous: bottle stop with positioning device (the bottle is filled in 2 stages), Stainless steel control cabinet, Storage tank with V2A lid and agitator, the system was overhauled in 2014 by Lenssen in Holland and equipped with a new control system. It was used to fill glass bottles with salad dressing., filling volume: up to 250ml

pasteurization plant ... more information

in use for sauces, jams and spreads in 212 ml, 314 ml jars and 215 ml, 244 ml and 295 ml bottles, filling range: up to 1 l, output: max. 180 glasses per minute, width: approx. 1,800 mm, height: approx. 2,800 mm, depth: approx. 2,000 mm, weight: approx. 4 t, completely overhauled and in excellent condition. Improved CIP cleaning, manual in English in PDF format and original manual in French.

Continuous tunnel pasteurizer, make Steiner, type TP 900/5000, year 2012, for continuous pasteurization of e.g. jam in jars,, Usable belt width: 900 mm,, Usable tape length: approx. 5,000 mm,, Adjustable throughput times: 11.26 - 49 minutes,, Nominal throughput time: 29 minutes,, 4 circulation pumps (1.1 kW),, Holding zone (5min), 3 cooling zones (each 8 minutes),, Max. container throughput height: 220 mm,, energy consumption at cont. Operation: approx. 70 kg steam / h,

Output: max. 80 packs/minute, designed for square cups (101 x 101 x 57 mm),, two lanes,, consisting of the following individual machines:, shell destacking, make Carsoe Anytray Twin Denester, year of construction 2013, volume dosing filler, manufactured by Lieder/Robot Food Technologies, series AWF, type 2, year of construction 2015, for free-flowing, non-sticky products that contain little liquid., min. 15 pieces of product must make up the volume to be filled The machine is designed for processing e.g. vegetable mixtures, rice, pasta, caviar, olives, etc., With lifting and tipping device and corresponding housing, without dispenser for liquid or pastes, self-made, Time-controlled pump for dosing oil, brine or pasty products such as dips or dressings, two filling stations,, tray sealing line, make Multivac type T700, year of construction 2012, Sealing of prefabricated trays, bowls and c ...

8-digit rotary machine, make Breitner, type IDR 2885, year of manufacture 1985, With template – pressure vessel,, Filling range: 10 - 10,000 ml,, Connected load: 4 kW, Used for delicatessen + mustard (200 + 250 ml - jars) ... more information

Packaging system, make Meypack, type VP452, year of construction 2006, Type of packaging: tray, tray/lid, Maximum output: 30 packs/min., Machine data:, Inlet height: 1,150 mm, Outlet height: 650 mm, Dimensions of the possible multipack:, L x W x H: 200-400mm x 120-300mm x 80-350mm, Cutting dimensions: L x W: 360 – 1,400 mm x 300 – 700 mm with Nordson hot melt device, ProBlue P/N213 544C

automatically, a closing station in rotation. , Drive: 1.5 kW, Generation of the vacuum by means of a vacuum pump, with closure sorting, with device for TO 53, TO 66, TO 82, format parts for glasses with diameter approx: 60, 64, 70, 78, 90 and 102 mm (65ml, 125ml, 275ml and 1,062ml glasses),, Output: up to a maximum of 1,200 glasses per hour.

Used for non-round fish cans,, filling via auger,, Speed infinitely adjustable via potentiometer,, No can - no filling, The holes in the plates for filling the spices into the cans have the following dimensions:, length: approx. 115 mm, width: approx. 50 mm,, Overall measurement of the machine: L x W x H: 860 x 1,000 x 1,700 mm., The year of manufacture is unknown, we assume that it is around 20 years old., We have no documentation for this machine.

Labeling machine, make Albagnac, type GAIA III, year 2013, The machine is suitable for labeling cylindrical and cone-shaped packaging with, Diameter 55 - 115 mm and height 120 - 380 mm, which requires different format sets. It, up to 3 different labels can be applied in one go., Magazine 1 is suitable for attaching a vertical guarantee band,, Station 2 for attaching a belly label and Station 3 for placing a horizontal top label., Each label station can be activated/deactivated., The belly label can be provided with additional data by means of an inkjet imprint, can be set individually on an additional control panel. The imprint is done before, attaching the label while the process is running., The packages are guided through the machine by a conveyor belt. By means of optical, Sensors recognize the packaging at the stations and labeling is controlled. At the, Control panel can set severa ...

Christiaens asparagus sorter for asparagus will be available for sale in June 2024 ... more information

Used Urschel model 1700 stainless steel Comitrol Processor. Recommended for size reduction applications of free-flowing dry and semi-dry products. Processor is designed to install three different reduction heads - slicing head, cutting head or microcut head (ONLY microcut head is inlcuded). Microcut rotor head is driven by 22 kW, 2938 rpm, 50 Hz electric motor. Cutting chamber is sealed and deters escape of dust, vapor and liquid. Includes switchboard and control panel. Dimensions are approximately 1300 mm lenght x 900 mm wide x 1800 mm high, weight approx 500 kg.