Manufacturer:
(Category: 103)
Stock number: 3896 PROCESSING Manufacturer: HERMLE , Type: C800 V Machines NO.: 14337, Year of manufacture: 2001 Specifications: Table size 1000 x 560 mm Large table load 1500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Stepless spindle speeds 0-16000 rpm Spindle motor 25/16.8 Kw Total power 31 KVA Control Heidenhain 430 - 3 Axis Fabr. Operating hours spindle 9666 hours Accessories: Tool holders 2 pcs Operating instructions Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weight: 7000 kg
AFM HarnaĹ› R 550 E CNC machining centre built by the Polish company AFM ANDRYCHĂ“W in 2006 is used for precision workpiece machining. The machine used in production facilities, is distinguished by its exceptionally stable construction and reliable high-speed spindle. The offer also includes equipment comprising, among others, a 16-position tool magazine and a convenient to use FANUC Series 0i-MC CNC controller. The HarnaĹ› R-550 E CNC vertical machining centre weighs 3300 kg. Technical data of the AFM HarnaĹ› R 550 E CNC milling machine - work table dimensions (L x W): 360 x 720 mm - feed rates in the X/Y/Z axis: 550/410/510 mm - maximum spindle rotational speed: 8000 rpm - minimum spindle rotational speed: 45 rpm - spindle taper: ISO BT 40 - spindle torque (at nominal rpm): 47.7 Nm - instantaneous spindle torque (at nominal rpm): 70 Nm - T-slot number: 3 - T-slot width: 14 ...
Year: 2011 - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders - cooling and lubrication installation ... more information
- X: 760 mm - Y: 530 mm - Z: 560 mm - Table size: 1200 x 500 mm - Speed range: 12,000 rpm - Spindle mount: SK 40 - IKZ: 20 bar - WZ changer: 30 times - electr. Handwheel: yes - Chip conveyor: yes - Control: Siemens 828 D - Suction: yes - Operating hours: 17,500 h - Total power: 25 kW - Machine weight: 8 kg - Space requirement (W x D x H): 2.4 Ă— 2.0 Ă— 2.8 m - Condition: good, little run Details 4th axis, swivel table Accessories Documentation, no other accessories
Nice machine, but parts of the controls are missing. Mechanically very good condition Sell spare parts or complete machine ! Table, milling head, guides, spindles, measuring rulers, motors, electrical parts, control panel, ... or to convert to new control ! ... more information
Machine : Gear Hob 1 set of gear hobs 20 pcs. Angle of engagement 20 degrees Module : Set all sizes M 1 2x M 3 M 1.25 M 3.25 M 1.5 2 x M 3.5 M 1.75 M 3.75 M 2 M 4 M 2.25 M 4.5 M 2.5 M 5 M 2.75 M 5.5 M 6 Gear hobs : M 1 , 20 degrees , φ 70x50, 80% M 1.5 20 degrees, φ 54x56, 90%, M 2 20 degrees, φ 72x72 90% M 2.5 20 degrees, φ 60x65, 80% M 4 20 degrees, φ 90x78, 80% M 2.5 20 degrees φ 78x190, 30% M 1.6 30 degrees, φ 85x130, 90% M 1.5875, 30, φ 82x120, 90%
Travel: X - Travel 750 mm Y - Travel 400 mm Z - Travel 500 mm Table 320 x 1270 mm Speeds 3800 rpm ... more information
Workspace: Travel in X/Y/Z 300/200/350 mm Distance spindle nose table 80 – 430 mm Rapid traverse 1200 mm/min Working feed X/Y/Z manual 50-550 rpm Feed force in X/Y/Z manual kN Clamping surface (rigid angle table) 600 x 200 mm Max. table load (rigid angle table) 50 kg Vertical milling head: Speed range 80-2200 rpm Power 1.4 kW Tool holder SK30 Dimensions: Length x width x height 1150 x 1410 x 1550 mm Weight approx. 500 kg
used milling machine Mikron WF31D Control Heidenhain TNC407 Built in 1998 Switch-on hours 8000 h Spindle speed 4000 rpm Feed rate 2-3000 mm/min Adapter SK40 Removable vertical head Prices plus currently valid VAT (domestic) The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved.
used milling machine Mikron WF32D with rotary table (4th axis) Control Heidenhain TNC415 electric handwheel Year of construction 1994 Switch-on hours 16000 h approx. 3000 kg Dimensions 2100x800x2600x1950 mm Prices plus currently valid VAT (domestic) The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved.
Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Tool Changer Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ... ... more information
Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Tool Changer Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ... ... more information
Collet set 15 pieces with drill chuck Vertical Drilling and Milling Head - T-Slot Width 12 mm Cutter head Coolant Setup x - travel 500 mm y - travel 200 mm z - travel 400 mm Feed: 5.6 - 238 mm/min with quill stroke Speed: 35.5 - 1800 rpm with rapid traverse Clamping area: 800 x 300 mm Total power requirement 16 A Spindle holder ISA 40 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
4 Spindle High Speed Train Milling Machine, Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw
- X: 650 mm - Y: 500 mm - Z: 450 mm - Table size: 1,100 x 600 mm - Table load: 450 kg - Speed range: 6,500 rpm - Spindle mount: SK 40 - Internal coolant supply: no - WZ changer: 38-speed - Controls: Heidenhain 430 - Spindle On: 6566 h - Program run: 6051 h - Machine ON: 31121 h - Total power: 20 kW - Machine weight: 5500 kg - Space requirements (W x D x H): 2.3 x 3.1 x 2.3 m - Condition: very good Details nice well-kept machine, ready for immediate use, the machine does not have a tool changer Accessories no other accessories, documentation
Profile Machining Center Machining length approx. 8,500 mm, max. profile size 300 x 200 mm, Travel XYZ = 9,300 x 1,000 x 800 mm, Sawing unit (mitre cuts), 4-axis drilling/milling unit (16 kW, 18,000 rpm), tool changer 24-fold option pendulum operation, option Clamping element displacement, preparation Flowdrill, , safety enclosure, BECKHOFF control panel (programming software CamQuix), refrigeration unit IDEA 16CCM-50-A-F-3 (No. C2019010009, year of construction 2019), Control cabinet, machine under power in production use Original price 176.500 EUR
TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...
TECHNICAL DATA SHEET CNC – Travelling column milling machine Make PARPAS Type SHARK One Control HEIDENHAIN iTNC 530 HSCI Year of construction 2016 Travel Longitudinal movement (X-axis) 3,500 mm Transverse movement (Y-axis) 1,083 mm Vertical movement (Z-axis) 1,074 mm Clamping table Clamping surface 4,000 x 1,000 mm Threaded holes with fitting seat Feeds X-, Y- and Z-axis, infinitely variable 2 - 30,000 mm/min. Rapid traverses in X / Y / Z 30 m/min feed force of the axes 10,000 N 2-axis milling head 2-axis milling head TUB-E92 with drive viaTorque motors for 5-axis simultaneous machining Power at 100 % ED 29 kW Speed range, infinitely variable 0-18,000 min-1 torque 92 Nm Rotational speed axis A/C 60 min-1 Tool holder HSK 63A – DIN 69893 Clamping force A-, C-axis 2,300/4,000 Nm Automatic tool changer ATC Tool stations 30 places ...
The machine is in good condition and can be inspected under power by appointment. Specifications: X: 500 mm Y: 300 mm Z: 380 mm Milling spindle by hand: 100 mm 18 spindle speeds: 40 - 2000 rpm 18 feeds X, Y, Z: 10 - 500 mm/min Rapid response: 1500 mm/min Clamping surface angle table horizontal: 700 x 320 mm Motor: 3 kW, 1420 rpm Dimensions approx.: 1500 x 1500 x 1800 mm Weight: approx. 1.5 t
Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slab Miller Strip width: 30” – 762 mm Cutter Speed: 500 rpm Metal speed: 18 fpm (1.9 m/min.)) Capacity: min. ¼” max. 1-1/4” Thickness Entry thickness range: 13 – 20 mm ... more information