milling machines used for sale

tool taper: MK4 diameter of tools max.: Ø 145 mmtable-size: L: 800 x B: 700 mmsurface area: Ø 300 mmtable travel: 200 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4,9 tdimensions of the machine ca.: 2,8 x 1,5 x 2,3 mAdditional information:Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profilesCycle milling and single milling as well as up-cut and climb millingSpecifications for machining spur and worm gears:-Outer Ø max. 250mm with counterholder-pitch max. 5mm-Tooth helix max. 45°-Tooth width max. axial milling 200mm and radial-axial milling 240mm-Milling width max. clamping table counterholder 655mmMilling slide:-swivelling 210°-travelling distance 350mm-feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolutionFurther features:-counter-point taper MK4, co-rotating-Centre distance of milling/clamping spind ...

Table dimensions: 500x200mm, connected load: 1.5kW, length: 1110mm, width: 1170mm, height: 1650mm, weight: 770kg, with documentation, without accessories. ... more information

Working range: 1000mm/355mm, table size: 1400mm/250mm, spindle: SK50, digital display: Mitutoyo. ... more information

Machine type milling machine - universal brand HURON type MU 5 year 1975 control type conventional storage France country of origin France delivery immediately cargo base camp, free truck Technical details x way 1300 mm y path 700 mm z-way 550 mm table size 1500 x 460 mm spindle speeds 15-2500 RPM spindle retainer for SK 40 feed range x - direction 1,6-820 mm / min feed Empire z-direction 1,6-820 mm / min rapid traverse X + Z - axes 2.8 m/min rapid traverse y - direction of 2.8 m / m in power - spindle motor 10 kW total power 14 kW machine weight approx. 4.6 t additional information good condition with 3 axis of DIGITAL HEIDENHAIN SK 40 BUILT IN 1975

Rotational speed: 112-3000/min, controls: SHW-NC, an inspection is possible. ... more information

x-travel: 13.000 mmy-travel: 2.500 mmz-travel: 2.250 mmw-travel: 360 mmtable:: double table: 12.500 mmtable load: 50 ttable width: 2.400 mmbed length: ca 26.000 mmPassage height: 2.250 mmmilling height: 2.000 mmmax. passage: 2.750 mmdiameter of quill: 130 mmspindle turning speed range: U/mintransmission ratio: drive capacity - spindle motor: kWspindle taper: dia. of quill: 280 mmquill:: ISO 50 rapid travel x/y/z: 8 / 1,5 / 3 m/minelectrics - voltage/frequency: 380/50 V/Hzweight of the machine ca.: tdimensions of the machine ca.: mtable guidance: hydrostaticuniversal angular head 37 kWangular milling head 37 kWangular milling head 56 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Tool holder: SK 40 Travel X/Y/Z: 620 / 420 / 400 mm Speed range: 40 - 2200 1/min Table size: 800 x 380 mm Motor power: 4 kW Dimensions (WxDxH), approx.: 1780 x 1600 x 2130 mm  ... more information

max. wheel diameter: 280 mmmax. number of teeth: 100 max. module: 6 min. module: 1 total power requirement: 6 kWweight of the machine ca.: 2500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Technical data: -Table size 1600 x 370 mm -Work area of the axles -X (longitudinal) 1000 mm -Y (transverse) 320 mm -Z (vertical) 420 mm -Milling head left + right Tilt + Swivel - 9 table feeds 20-800 mm / min -Rapid traverse longitudinal / transverse 3000 mm/min -Rapid traverse vertical 1375 mm / min -maximum distance spindle - top 480 mm -min / max distance spindle Center / stand 450 mm -Tool holder ISO 50 - work spindle speeds in 12 levels adjustable 45-1400 RPM - coolant system - powered 400 V / 5,8 kW -Space requirement approx. B H 2100 x 2200 x D 2800 mm -Weight approx. 3500 kg

x-travel: 400 mmy-travel: 220 mmz-travel: 400 mmspindle taper: ISO 40 spindle turning speed range: 25 - 2500 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1200 mm/mincreep feed: 4 mm/mincontrol: Heidenhain TNC 113 total power requirement: 2 kWweight of the machine ca.: 1500 kgdimensions of the machine ca.: mCondition: ready for operation: Electric 380 Volt: Switch gear cabinet ( separate ): Angle table ( fixed ): 700 x 330 mmTaper: diverse Bellows with slats of aluminium: Protection cabin: bottom tray: Machinefeets: with active digital display Heidenhain TNC 113, for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 stueck fraesmaschinen SCHAFFNER F.17.34, table 750 / 180, with double vertical freskopfFurther:2 piece SCHAFFNER 17.3also horizontal  ... more information

2 pieces of SCHAFFNER F.17.34 milling machines, table 750 / 180, with 2-fold vertical milling headFurther: 2 pieces of SCHAFFNER 17.3also horizontal milling possible ... more information

x-travel: 1600 mmy-travel: 800 mmz-travel: 700 mmtable:: 2000 x 630 : control: Heidenhain type: TNC 355 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

x-travel:800 mmy-travel:250 mmz-travel:350 mmtable-size:1130 x 250 mmno. of flutes:4 groove width:14/25 mmtaper MK:4 spindle turning speed range:56 - 2800 U/mintotal power requirement:9,5 kWweight of the machine ca.:2009 kgdimensions of the machine ca.:1400 x 1700 x 2800 mmDocuments:vorhanden  ... more information

Qty. 1 Second-hand milling and scalping machine – Copper and brass strip – stopped in 2010 Mfc.: Torrington Type: FR1 Built: 1976 Milling and scalping from the upper and lowe sides Strip width: 508 - 770 mm Strip thickness: 10.0 – 13.5 mm Coil weight: 6.5 Ton Capacity: approx. 200 000 T/annum

x-travel: 850 mmy-travel: 250 mmz-travel: 470 mmtable-size: 1250x350 mmspindle taper ISO: 40 spindle turning speed range: 45-2000 U/minweight of the machine ca.: 2.5 tWith digital read-outMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bed type milling machine SHW UF 6, new in 1977, control system Siemens  ... more information

Including documentation, unused incremental length measuring scales for X, Y, Z-axis and display, on-site inspection is possible, has been regularly serviced. ... more information

Universal milling machine UF20 LVQE Table Y 320 mm X 1200 mm Z 800 mm Table length 1.55 m Speeds: 45 - 2000 rpm 16 A 380 V Length 1.30 m Width 1.20 m Height 1.90 m Swivel head Coolant pump Feed Accessories  ... more information

x-travel:2300 mmy-travel:1200 mmz-travel:950 mmfeed::max. 4000 mm/minspindle turning speed range:31,5 - 1.600 1/minspindle taper:SK 50 spindle drive:30 kWmilling head -swivable +/-:45 °distance spindle /table:max. 1200 mmtable surface area:3000 (4200) x 1200 mmtable load capacity:10000 kgControl:TNC 426 HEIDENHAIN weight of the machine ca.:38 tCNC milling machine,from 2008 with HEIDENHAIN TNC 426 control,in 2022 overhauled,2 pcs. workbenches2 pcs. tool cabinetlot of tools (around 140 pcs.),el. handwheelapprox. 69.000h "machine on, 18.500h "spindle on"very good condition, under power in factory