presses used for sale

Wemhöner Wood Press Size : 250 cm x 120 cm Double table Machine is in a good working condition ... more information

I will sell the membrane press Friz optimat MFP with a boot device. ... more information

Machine dimensions: 2900 x 1200 x 2000 mm Press dimensions: 2000 x 500 mm Press thickness: 20 – 350 mm Electric power: 14Kw/h, 40A Voltage frequency: 400V / 50Hz / 3P + N + PE Pressing power: 3200kg Production capacity: 1000 – 3000 m² per day Weight: 1000kg Mold weight: 100kg Emergency stop button: Yes

Brick press with self-cleaning system A-200 Bogatyr2” Productivity 480 bricks per hour Total pressure of hydraulic cylinders: maximum 240 tons (top of them) Product size, max 270x250x110/90 mm Operator panel 7 inch display Built-in help and hint system Automatically check the density and height of the brick in each cycle Control of brick parameters for rejection in each cycle Yes Automatic adjustment to eliminate defects in the next cycle Yes Overall dimensions, no more than 2200x1300x2400 mm Weight of the press with oil station, no more than 3.2 tons

Carousel press with hydraulics from the manufacturer LISY - DVOŘÁK Working length: 2200 mm Working width: 1200 mm Maximum wood thickness: 60 mm Max pressure: 100 bar ... more information

-Exhibition machine----------- Technical data ----------Briquette : 60 mm, hydraulic power unit 3 kW: 140 bar, voltage: 400 V, frequency: 50 Hz, fuse: 16 A, power approx.: 20-35 kg/h, weight approx.: 300 kg- Simplest handling- Hydraulic control- Briquette diameter 60 mm- Briquette length adjustable as desired (max. 60 mm)- Motor equipped with motor protection switch and emergency stop- No electronic components such as controllers, sensors and sensors or complicated controls- Large storage container- Briquette tongs tempered- Press rod replaceable- Presses without the addition of additives- Thanks to the pre-compressor, even voluminous chips can be processed- No adjustment work or monitoring of the pressure necessarynew exhibition machine

hydraulic cylinders horizontal, hydraulic cylinders vertical---------- Technical Data ----------Press width: 3,500 mm, Press height: 2,250 mm, Cylinder stroke: 200 mm, Cylinder stroke horrizontal: 80 mm, Total length: 4500 mm, Motor: 1.5 kW, Space requirement (LxDxH): 4,500x850x3,000 mmSold as is, without technical inspection

press capacity:950 kNcontrol:Siemens S7 Required air-pressure:6 barloading area:1200 x 600 mmPressure power:1000 kNtotal power requirement:18 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:2600 x 1300 x 3100 mm ... more information

Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... more information

Description: serial number:  ,EUR/031/16 control: SIEMENS Simatic  , power: 5.5 kW max. working dimensions: ,2500 x 1500 x 650 mm min. working dimensions: ,250 x 200 x 650 mm length of entrance strip: 3000 mm press length: 4900 mm length of the output strip: 2500 mm connection power: 5.5 kW power of air connection: 6 bar serial number: EUR/031/16, control: SIEMENS Simatic, Approx. Onsite Dimension. (l x w x h): 5,000 x 3,000 x 2,000 mm, weight approx.: 2,500 kg

Description: Loader belt dimensions 1920 X 3200 mm , Integral loader dimensions: 2200 x 4400 x 1000 mm  , Unloading roller conveyor dimensions:  ,1900x 2500 x 1000 mm  , Pressing table dimensions: 1900 x 3500 mm  , Equipped with No. 6 pressing plungers DIAM: 150 mm approx  ,Approx. Onsite Dimension. (l x w x h): 9,500 x 3,000 x 2,100 mm, weight approx.: 6,000 kg

Description: • Finger joint assembly press • Maximum passage width approx. 290 mm • Maximum thickness approx. 80 mm • The machine consists of: • MAGGI VARIOFEED 4 4-roll feeder • Upper vertical clamping device • Movable cutting head for retesting: saw blade diameter 300 mm, 2.20 KW-3000 rpm motor • Pneumatic pressure deviceApprox. Onsite Dimension. (l x w x h): 5,600 x 1,750 x 1,400 mm, weight approx.: 700 kg

Description: 3 bars , Motor Power: 1.5 kw ,  ,Approx. Onsite Dimension. (l x w x h): 2,800 x 1,100 x 2,200 mm, weight approx.: 131 kg ... more information

Description: The EB-350-50 waste briquetting extruder is designed to produce briquettes with an octahedral cross-section size of 53 x 53 mm with a central hole. , The raw materials are sawdust, as well as buckwheat hulls, sunflower, rice. Parameter unit rev. value (extruder performance, up to depends on the type of raw material and its preparation) kg h 350 bulk density of the original raw material not less than 120 kg/m3 feed humidity 4-8 % feed fraction 2-8 mm briquette density not less than 1000 Kg/m3 process temperature • K ( C) 423-623 raw materials in the pressing area (150-350) installed power no more, inclusive. kW 46.4 kW electric motor of the main engine kW 37 electric motor feeder 2.2 kW electric heaters 7.2 kW electricity consumption for one hour of extruder, no more than 38 kWh specific consumption of 0.11 kWh electricity no more than global dimensions, no more than:  ...

Description: Hydraulic Frame PressApprox. Onsite Dimension. (l x w x h): 3,840 x 1,710 x 2,900 mm, weight approx.: 2,000 kg ... more information

Description: 3 spindle press Distance between spindles: 750 mm  ,Approx. Onsite Dimension. (l x w x h): 2,750 x 1,350 x 2,500 mm, weight approx.: 1,300 kg ... more information

Description: Cabinet dimensions: Cabinet length- 300 - 2600 mm Cabinet height- 300 - 1350 mm Carcase width- 220 - 700 mm Pressing force: Horizontal- 1800 kg Vertical- 2300 kg Pressing elements: Vertical 7 pieces 150 x 50 mm Horizontal 6 pieces 150 x 50 mm Connection: 400 V 3 KWApprox. Onsite Dimension. (l x w x h): 3,800 x 1,000 x 2,400 mm, weight approx.: 2,200 kg

Description: Vacuum membrane press with heating bonnet 200L vacuum vessel Vacuum output -0.85 bar 400Vserial number: F11011L, pressing width: 1,540 mm, pressing length: 3,880 mm, Approx. Onsite Dimension. (l x w x h): 4,500 x 1,900 x 1,300 mm, weight approx.: 450 kg ... more information

Description: BIESSE COMIL CF 2000 Clamping Press Machine Working length: 2500mm Working width: 600mm Working hight: 1200mm Max throughfeed width: 720mm Feeding speed: 7,5-37,5m/min Adjustable time for the horizontal pistons: 6,85m/min Working air pressure: 6-8 bar Consumption per working cykle: 115dm3 Power 400 volt, 50 Hz, 3 phaseserial number: 55,969, Approx. Onsite Dimension. (l x w x h): 7,050 x 720 x 2,600 mm, weight approx.: 2,900 kg

Description: serial number U1490123 , press platens dimension mm 3000 x 1300 , number of vertical cylinders ,- diameter mm N °6 Ø 55 , press platen thrust ton 30 , mobile platen bottom (bottom-up closing system) , specific pressure on the 80% of the press platen kg/cm2 0,93 , standard opening between press platens mm 500 , loading side mm 2500 , for further technical detail (look at the PDF Sergiani.pdf) , ATTENTION - Tools, cones, drills and working units, drilling equipment, milling equipment, additional units are NOT included in the delivery.Approx. Onsite Dimension. (l x w x h): 3,800 x 1,550 x 2,000 mm, weight approx.: 1,530 kg