mills used for sale

-Granulator with sound insulation -Working width: 600 mm -Rotor diameter: 400 mm  ... more information

Cutting mill / pipe cutting mill Special mill for shredding pipes Feeding via feeding shaft (rope pull system) Manufacturer: NEUE HERBOLD, D-74889 SINSHEIM Rotor diameter: 800 mm Working width: 600 mm Drive: 110 kW ... more information

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

Cutting mills Drive with 4 New Knives Drive General Overhauled as a replacement for Getecha cutting mills . Pradler Machines Service Service for temperature control / cutting mills / drying  ... more information

M. No.: 0392 Equipment / Additional information: Feeding width (mm): 500 Kw: 7.5 A: 380  ... more information

Used only for experiments.  ... more information

Material: steel Engine: 37 kW Weight: 900 kg Length x Width x Height: 1300 mm x 1000 mm x 900 mm Applicable for production of finest plastic-powder: - finest powder without use of nitrogen - best powder characteristic: best flow behaviour, high apparent density and narrow particle distribution - low grinding temperature, in terms of optimal ducting of the air - fully automatic continous operation - simple regluation of particle size. Throughput rate : 50 - 200 kg / h. Very good condition. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

Herbold granulator, type: SML 30/50, drive 22 Kw., built in 1994  ... more information

5cv MATEU SOLE grinder. In operation.  ... more information

Plastic crusher, industrial shredder, cutting mills Wanner 20/20 E-SS for sale in very good condition. This slow-speed gear grinder is used next to an injection molding machine or in a separate room for grinding angles and middle parts. Due to the low speed, it is also suitable for grinding low-melting elastomers and sensitive engineering plastics. On the rotating rotor there are 6 knives. The crushing capacity of the grinder is approx. 60kg/h. The mill is equipped with a 4 kW engine.

Engine 2.2-3 kW 2 pieces of it  ... more information

Strand granulator type: ASG-4-63 without feed The GRANULATOR ASG 4-63 is only suitable for the cutting/granulating of semi-hard thermoplastics and is used in the regranulation /recycling of plastics on/on an extrusion line Up to 4 pieces of individual plastic strands with the Ø of 4 mm can be fed to the cutting rotor via a separate feeding unit, usually strip or roller puller. The part/granulate length is proportional to the feeding speed and can be adjusted by changing the rotor speed. Speed rotor max. 380 min-1 Ø Feed strands max. 4mm Cutting force : ~410 N EL connector: 400VDC 16A

Granulator - Getecha RS3004-A1 / Very good technical condition Year of Make: 2008 Slow-moving granulator with gearbox, with cyclone and dedusting Power: 11 kW 2 stator blades, 3 rotor blades, the sieve - interchangeable Hopper inlet: 440x425 mm Grinding chamber opening: 410x325 mm Automatic feeding of the regrind to the big bag Soundproofed mill Price: On request

Year: 2012 - technically efficient, ready to work - after full service - processing of 2 profiles  ... more information

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible  ... more information

Used Rapid 2690-KURF Grinder, age 2005 Max. Infeed width 900 mm Throughput 500 Kg/ hr Main Motor 15kW Pendulum Roller for infeed tension control Dual Roll Ingfeed, Motor 0.75kW Regrind Outfeed Blower type F-25 , Motor 2.2 kW No. of Rotor Knives 3 No. of Stator Knives 3 Sound Proof Housing

Used Rapid 2690-KURF Grinder, age 2003 Max. Infeed width 900 mm Throughput 500 Kg/ hr Main Motor 15kW Pendulum Roller for infeed tension control Dual Roll Ingfeed, Motor 0.75kW Regrind Outfeed Blower type F-25 , Motor 2.2 kW No. of Rotor Knives 3 No. of Stator Knives 3 Sound Proof Housing

SEM (USA) granulator, model 22, rotor 5 blades, housing 2 blades, opening: approx. 600x400 mm, complete with control cabinet 400 V. 50 Hz, mobile, motor 15 kw.  ... more information

Stock # U2333-5 Used cutting mill by Alpine model B32/40 RO. Mill has dimensions of inlet into cutting chamber 400 mm x 355 mm. Rotor is equipped with three knives and has diameter 315 mm x length 400 mm. Working rotation of rotor up to 700 rpm. Mill has 3 static knives. Bottom discharge through screen with mesh about 12 mm. Rotor is belt driven by el. motor with power 18.5 kW, 1500 rpm, 400 V, 50 hz. Mill has stainless steel feeding hopper with inlet dimensions: 390 mm x 240 mm. Mill is equipped with two belt conveyers. First feeding material into mill, has width of belt 250 mm, with baffles each 675 mm. Working length of conveyer 290 cm. Top of conveyer is covered with insulation. Second conveyer is for transport product from mill discharge - also has working width 250 mm, with baffles each 675 mm. Working length 200 cm. Mill has also dust filter with exhaust fan and electric contro ...

Including bottling line Rotor diameter: 320 mm Rotor width: 440 mm Drive motor 11 kW Weight approx. 800 kg  ... more information