presses used for sale

- Pressfläche 3000 x 1300 mm - max. Werkstückhöhe 50 mm - Druck horizontal max. 30 t (2,5 kg/cm2) - 10 horizontale Hydraulikzylinder - Pressdruck vertikal 100 t (3,1 kg/cm2) - Öffnungsweite der Platten 250 mm - Vorschubgeschwindigkeit 30 m/min - Motor Vorschub 2 x 0,75 kW - Heizleistung 40 kW - max. Temperatur 120 CC - Motorleistung gesamt 5,5 kW / 400 V - inklusive Leimangabestation - inklusive Rollentische im Ein- und Auslauf - Abmessungen L=5500, B=3400,H=1900 mm - Gewicht 9000 kg

MEMBRANE PRESS type FISMA 2200 x 1300 . usata useful size mm. 2200 x 1300 cover opening and closer by pneumatic pistons volt. 380/50 with separate vacuum system ... more information

Code: 0332 Brand: AMASPRES (ITALY) Model: 3000 Membrane press Working size: mm 3000 x 1300 Opening mm 500 Working height mm 250 Cover opening and closing with vertical pneumatic pistons This press is suitable for veneer of shaped pieces , such as window sash frames, curved pieces Upper heating with hot air Heating of lower side with hot air Consuption about 9 kwt Working cycle: about 10 min. Complete compressor for lifting of cover and under cover Processing prevacuum adjustable up to 6.5 atm The machine is equipped with time alarm, thermostat, thermometer, warning lights for calories and pumps Overall dimensions press mm 4100 x 1700 x 2050 h - Weight kg 1800 Overall dimensions depressor mm 1400 x 500 x 900 h - Weight kg 100

Table size 2800x1500 Number of table 2  ... more information

Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

SPECIFICATIONS: Membrane press for gluing doors, curves and other wooden elements Dimensions mm: 2400 x 1120 Heating by electrical resistance Complete with decompressor, timer and tarpaulins  ... more information

Wehmoner Membrane Press  ... more information

Tine press Fabr. Hungerbühler / Humag Pneiummatic up to 20 bar  ... more information

- max. Werkstückhöhe 200 mm- 4 Spannzylinder für Werkstückspannung, paarweise zuschaltbar- Tischabmessung links L =500 mm, B=400 mm- Tischabmessung rechts L =500 mm, B=400 mm- Hub rechter Tisch 40 mm- Hub Zylinder 80 mm- Pneumatikanschluss 8 bar- Gradeinstellung 0C, 22,5, 33C- Fußpedal zum Spannen und Lösen- CE-Ausführung- Abmessungen L=1160, B=500, H=1200 mm- Gewicht 150 kg

High frequency - miter press Miter assembly machine Miter gluing machine Brand: Grum-Schwensen Model: HF 120 High frequency device Manufacturer: Himmel / Himmelwerk Model: HG 3300 Workpiece cross-section max.: 100 x 100 mm PVAC glue / white glue  ... more information

Dimensions of the press plate 50x100 cm You can also buy a copy cutter. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English. We also have a lot of machines in stock.  ... more information

Veneer press Joos Moulding press Pressing area 2500 x 1100 mm Pressing surface can be divided into three surfaces Pressing surface then approx. 3 x 650 mm x 1100 mm Aperture 550 mm Pressing pressure 2 kg/cm² Without heating plates With heatable mould  ... more information

SECOND-HAND HYDRAULIC BENDING PRESS MM. 2400X1300 - Platens mm. 2400X1300 - Opening mm. 1200 - N. 2 cylinders - Top bottom movement  ... more information

Veneer press Wemhöner Moulding press Pressing surface 2600 x 1100 mm Aperture 1000 mm Upper surface can be divided into 4 faces, each 650 mm Pressing pressure maximum 4 kg/cm² Lower surface in 2 faces, each 1300 mm Bottom support with transport rollers Without heating plates  ... more information

- Pressfläche 2500 x 1250 mm - Gesamtpressdruck 50 to - max. Öffnungsweite 1000 mm - Gesamtanschluss 4,0 kW - Abmessungen L=3000, B=1250,H=3050 mm - Gewicht ca. 2850 kg ... more information

- Pressfläche 2500 x 1250 mm - Gesamtpressdruck 100 to - max. Öffnungsweite 1000 mm - Gesamtanschluss 4,0 kW - Abmessungen L=3000, B=1250,H=3050 mm - Gewicht ca. 2850 kg ... more information

- Pressfläche 3000 x 1250 mm- Gesamtpressdruck 50 to (1,4 kg cm2)- 2 Hydraulik Zylinder Durchmesser 125 mm- Druck Hydrauliksystem 210 kg/cm2- max. Öffnungsweite 1000 mm- Gesamtanschluss 5,5 kW- Abmessungen L=3440, B=1250,H=3200 mm- Gewicht 3000 kg ... more information

- Pressfläche 3 x 1000 x 1250 mm - Gesamtpressdruck 3 x 25 to - max. Öffnungsweite 1000 mm - Gesamtanschluss 4,0 kW - Abmessungen L=3000, B=1250,H=3150 mm - Gewicht 2850 kg ... more information

Wood pelletizing plant, KAHL pellet press used the complex includes: Pellet press AMANDUS KAHL Matrice diameter approx. 1000 mm Pallet diameter approx. Ø 8 mm 5 Koller approx. Ø 340 x 130 mm Motor power 160 kW an auxiliary motor is damaged, but can be replaced by us Dimensions approx. 1600 x 1800 x 3000 mm + motor Weight approx. 8000 kg Conditioner / Dosing and Mixing Screw Diameter approx. Ø 400 mm 5.5 kW Dimensions approx. 3100 x 900 x 800 mm Single shaft paddle mixer Dimensions approx. 3300 x 1600 x 2000 mm + gear motor Pellet coolers Dimensions approx. 2300 x 2300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.