gluespreader machines used for sale

Manufacturer: Bürkle, Type: U110 , Year: 1990, Stages: 3, Lateral press: yes, Heizplattenmasse ca.mm: 3000x1300, Anzahl der Etagen: 3, Zylinderhub mm: ca.400, Beschickungsseite: längs, Landing opening mm: ca.100, Heizplatten aus Stahl: Stahl-Aluminium, Temperatur min-max: 150, Heated by: Warmwasser, Gesamtdruck KN: 1100, Anzahl der Presszylinder: 8, Time switch: yes, Press length mm: 3000, Pressing width mm: 1300, Year :1990

Shaped part edge banding machine, edge banding machine, edge banding machine -Workpiece thickness: 10- 85 mm -Fan heater: 6 kW pre-coated edges -Cut knife -edge plate -Transport dimensions: 900/700/H1080 mm -Weight: 135kg ... more information

Werkstückrückführung Fabrikat: BARGSTEDT Typ: TFU 02/L/33/67 Baujahr: 1991 Bestehend aus: - Luftkissentisch - 2 angetriebene Gurtbänder - Auslaufröllchentisch Strom: 380V/50Hz/16A Steuerspannung: 220V ... more information

Manufacturer: Istel, Type: Korpussprese Nischen schränke, Year: 1992, Korpuspressen-Montagelinie: no, Work piece width min-max mm: 250-550, Min.-max. workpiece length in mm: 500-2500, Min.-max. workpiece height in mm: 150-350, Working widht max mm: 550, Working width min min mm: 250, Hydraulical/pneumatical: Hydraulisch, Floors and sides: 10 Böden wählbar, Year :1992

Sale of a gebr. edge banding from the manufacturer Hebrock. Specifications: Year of construction:1992 Edge thickness:0.4-8.0 mm Min. workpiece length:300 mm Min. workpiece width:70 mm Extraction connection Ø:140 mm Weight (kg):800 Dimensions (L x W x H mm):4100 x 1400 x 1300 mm Workpiece height:8-50 mm Chain feed:11 m/min Cross-cut saw unit:Yes Flush & Radius Milling Unit:Yes Hot melt glue container Support plates Roller capping pneumatically up to 3 mm edge thickness Flush milling unit

Brand: Hebrock Model: AKV83 Year of construction: 1992 Specifications: Edge thickness 0,4 - 5,0mm Roll ø750 mm Plate thickness max. 10-60 mm Workpiece length: min. 170 mm Connection: 230V, 40Hz Relay Control 1.Hot air (Phön) 3 KW, heat time: 1 min. 1. Caper knife - front & rear same product capping 6. Flat milling top & bottom Feed 4 m/min. Air pressure 7 - 8 bar Machine dimensions: LxHxW 1.750 800 1.250 mm (incl. plate) Machine weight: 95 KG

Edge glue machine HolzHer express 1437 Edge gluing, flush milling, caps flush milling with chamfer milling or RADIUS milling with sep. Aggregate Schwabelscheiben 2 mm and two units for chamfering or just milling milling ABS edge 2 additional units for RADIUS Hours of operation 1072.5 hours Masch. No. 721/9-203 L x W x H: 400 x 120 x 170 cm Weight approx. 900 kg Built in 1992 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble  ... more information

Tabletop unit for pre-coated edges. With hot air gun 230 volts and roller separator cap. With hand edge cutter to cut off the edge edges.  ... more information

Manufacturer: Himmel Hochfrquenz Presse, Year: ca.1993, Work piece width min-max mm: 20-150, Min.-max. workpiece length in mm: egal, Min.-max. workpiece height in mm: 6-40, High / low pressure: yes, Vertikaldruckzylinder: yes, Horizontaldruckzylinder: yes, Haltezylinder zum Fixieren der Hölzer: yes, FREE TEXT: Hofrequenz für Rahmenteile, Year :ca.1993

Manufacturer: Wemhöner, Year: 1994, Type: Membranepresse, Number of tables: 2, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Thermoöl, Max.Teilegrösse mm: 3.200 x 1.300, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 3.200, Min.-max. workpiece height in mm: 10 - 50, Membrane: yes, Durchmesser Presskolben: ca 180, Placing table: 2, Membrane: yes, Pressing cylinder: 5, Landing opening mm: 220, Automatische Entleerung: yes, Folienschneidmaschine Hersteller: yes, Folienkalander: 16 Rollen, Foil cutter: 2, Year :1994

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 500/500/H600 mm -Weight: 54 kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.3 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Weight: 64 kg

Manufacturer: Italpress, Type: Mark C 18-30, Year: 1994, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3000 X 1800, Number of storeys: yes, Charging side: längs, Landing opening mm: 200, Steel heating plates: 210 oben/unten 120, Min-max temperature: 145, Heated by: Dampf, Working temperature: 150, Overall pressure kN: 200 bar, Return cylinder N/cm2: yes, Number of pressing cylinders: 8 /Durchmesser 300 mm, Stages: 1, Press length mm: 2800, Pressing width mm: 1700, Transport roller conveyor: Einlaufrollenbahn, Longitudinal through running press: yes, Outlet conveyor: yes, Electrically heated kW: yes, Year :1994

Manufacturer: Hess , Type: Rahmenpresse, Year: ca.1995, Work piece width min-max mm: ca.1500, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-90, Working widht max mm: 2500, Hydraulical/pneumatical: elektrisch, Year :ca.1995 ... more information

Machine with full equipment: Add Glue up to 15 mm Flat saws Preliminary vessels Chamfer milling Rounding threads and corner copying Grinding unit Flat and rounding drawing blade Smooth with return belt  ... more information

max. banding thickness : 0.2 - 6 mm Min. workpiece thickness : 8.0 mm max. workpiece thickness : 42 mm min. workpiece width : 70 mm Feed speed 1: : 12 m/min Adjustment of the joining ruler : axis via control Heating time : approx. 6 min Auto. Role Magazine : Yes Cross-cut shears up to : 3.0 mm Single edge feeder : Yes Gluing : Glue basin with granules Cross-cut saw : Yes Double-cap unit Combination unit flush milling

Manufacturer: Hess, Type: Speedy Quick Step, Year: 1995, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 2500, Working widht max mm: 600, Hydraulical/pneumatical: hydraulisch, High / low pressure: Hochdruck, Cylinder vertical: 3, Cylinder horizontally: 2, FREE TEXT: Automatisches Verfahren der Balken und Lanhhubzylinder für vertikale Bewegung, Year :1995

workpiece return Brand: Ligmatech Type: ZHR 15/XX/RE Year: 1995 for right machine  ... more information

Type AKV 88 F Without glue tank Max. edge thickness 3 mm Max workpiece height 50 mm Feed speed : 0-7 m/min (0,25kW) Power consumption 3,2 kW Work table height 890 mm Made in Germany 1996 y. Transport dimensions 1360x680x1220 mm Weight 150 kg  ... more information