planing machines used for sale

I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.

SCM moulder model SUPERSET 23 with 5 shafts: - Useful working dimensions 230x120mm - Alfasistel electronic control for 2-axis programming - Cardan drive and differentiated pneumatic pressure - Variable feed speed from 4 to 26 m/min - feed unit before the 1st shaft, with quick override - drive roller in the plane after the 5th shaft - 2500mm entrance level - Deck lubrication pump - shafts D=40mm at 6000rpm - Complete with 4 knife heads Trees: - Under HP -right - Left (right+left with single HP engine) - Above HP - Under HP

The machine contains the components from the large-scale series of the powerful WEINIG class Working width 20 – 260 mm / carpentry version Working height 8 – 160 mm 5 working spindles DM 40 mm Long inlet work table - 2000 mm 5 working spindles, bottom 5.5 kW, left + right 7.5 kW, top 7.5 kW, plaster bottom 11 kW Pneum. Pressure of the feed rollers Cardan feed infinitely variable 5 – 24 m/min. ATS system: Up to 98 workpiece dimensions can be programmed and called up at the touch of a button Left and upper spindle drive auto. in position Machine in CE design Built in 1998 Without editing tools

SPECIFICATIONS Pre-planer mm: 2000 Number of spindles: 5 Spindle configuration: I below - week 5,5 II - III right- left - KW 7,5 IV above - week 5,5 V below - week 4,0 Cardan shaft Speed-controlled drive KW: 4.0 Spindle diameter mm: 40 Revolutions per minute: 6,000 Max. working width mm: 230 Max. machining height mm: 120 Complete with: - Soundproof cabin - Grooved table -Tools CE-compliant

Heavy Duty Four-Sided Planer Still in operation until the end of July 2024! Detailed technical description in the PDF document (attached in the photo gallery).  ... more information

Catalogue number: 6824 TECHNICAL SPECIFICATIONS - max width of the workpiece 220mm - max height of the workpiece 125mm 4 spindles: 1) horizontal bottom 220mm 7,5kW 2) vertical right 125mm 3) vertical left 125mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 11kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling, toothed and metal insertion rollers from above - from above 1 double shaft pulling, rubber - from the bottom of the pulling shaft, rubber - feed on cardan shafts - smooth regulation of feed speed 6-22m / min - feed motor 3kW - lifting motor 0,55kW - electrical setting of planing thickness - length of the introductory table top 2470mm - central lubrication - diameter of extraction connection 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3940x1450x1470mm - weight 1666kg – unpainte ...

Order No. 6762 TECHNICAL DATA - max width of the workpiece 220mm - max height of the workpiece 130mm - 4 spindles: 1) horizontal bottom 220mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 7.5kW - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - from the top 4 introducing, drawing, toothed rollers - from above, 1 pulling roller, rubber - at the bottom, a pulling shaft, rubber - feed on cardan shafts - smooth regulation of the feed speed - 1.5kW feed motor - lifting motor 0.25kW - electric adjustment of the planing thickness - length of the introductory top 1970mm - central lubrication - diameter of the extraction connector 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3350x1400x1430mm - weight about 1500 kg - German production - unpainted - us ...

Four-sided planer Weinig Hydromat H25N with feeder 100 m/min - German production - hydraulic feed up to 100 m / min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 bottom spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 bottom spindle 7.5 kW 8 x universal spindle 1800 7.5 kW infinitely adjustable feed rate up to 100 m/min feed pump motor power 22 kW nine rollers in the pulling countertop, three of which in front of the first head seven steel pulling upper rollers four upper rubber pulling rollers pneumatic clamping 1-6-7 spindle joint automatic countertop lubrication feeding table 3000 mm Speed adjustable smoothly up to 100 m/min two upper pneumatic rollers six bo ...

FOUR SIDED PLANER model WEINIG PROFIMAT P 23 E with 5 spindles second hand machine working condition : Excellent CE mark : Yes volt. 380/50 grooved table ( removable ) quick tool locking device with tools : Yes , as in video Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 7,5 ( Kw 5,5 ) 4° spindle : thickness planer . motor power Hp 10 ( Kw 7,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) grooved table ( removable ) quick tool locking device Technical details : forward motor power Hp 4 ( Kw 3 ) shaft rotation speed rpm 6000 feed speed : from 5 to 24 mt./min. max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 automatic lubrication system electric height adjustment set of service keys / d ...

530-mm plane width and 4 knife waves quiet run through plane knife waves diameter 125 mms. stable Abrichtanschlag tiltable from 90 ° to 45 ° of highly competitive 5.5 kW of engine S1 . table length 2.9 m Max Spanabnahme, mm 8 Absaugstutzendurchmesser, mm ?160 total weight, kg 800 ... more information

Code: 0246 Brand: COLOMBO Model: ACS 800 Automatic thickness planer for wood, beams, sawmills, plastics, composites and various materials Working width mm 800 Max thickness to be planed mm 270 Motor Hp 10 Knife shaft rpm 5000 Automatic table lifting N° 2 feed speeds N° 2 rollers on table Overall dimensions mm 1350 x 1150 x 1050 h

Moulder WEINIG model PROFIMAT 23 (260×180) FORTEC, in configuration for carpentry / lamellar processing: – useful working measures 260x180mm – electronic control of 2 axes, SIEMENS programmer SIMATIC OP7 – gimbal towing and differentiated pneumatic pressure – variable feed speed 5 – 24 mt/min – feed motor KW 4 – HP 5,5 – upper feed group before the 1st shaft – lower feed group after the 5th shaft – machine top with air film – short 1050mm entry plane – foot lubrication pump – protection cabin – shafts D=40mm at 6000rpm – complete with tools D = 120mm - Z = 2 Trees: 1- under kw 11 – hp 15 2- Right 3- Left (right and left with single engine kW 11 – HP 15) 4- above kw 11 – hp 15 5- under kw 7,5 – hp 10 Machine according to CE standards

4 CUTTER HEADS, MAX. DIMENSIONS OF THE WORK PIECE: 180/120 MM, MIN. DIMENSINS OF FINISHED WORK PIECE: 16/7 MM, SPINDLE SPEED: 6000 RPM, OPERATION HOURS: 30 HOURS ONLY!  ... more information

Four-sided planer REX HOMS-410 – made in Germany – for wet wood TECHNICAL PARAMETERS: planing width max. 410 mm planing height on both sides 200 mm planing height on four sides 200 mm spindle diameter 40 mm shaft motor power 2 x 11 kW spindle motor power 2 x 5.5 kW feed speed infinitely adjustable feed speed adjustable on the inverter three upper pulling rollers three lower pulling rollers two auxiliary rollers in the table top brake minimum workpiece length 450 mm dimensions of the machine (length/width/height) 250 / 220 / 180 cm weight ~ 3500 kg

Weibert WJ-FS32-W7 Dressing thickness planer 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables G&2972-2036-W7  ... more information

Specifications: -working width 230 mm -feeding speed 5-25 m/min. -working height 130 mm -number of spindles 9 -configuration down-right-left-right-up-down-left-up-down -total power about 45 kW -  ... more information

Part Number 6368 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 5,5kW 3) vertical left 130mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 11kW 6) horizontal bottom 230mm 18,5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal pulling introductory shafts, swivel including 2 double - from above 4 pulling rollers, rubber - pressure from above 2pcs - from the bottom of the ratchet - from the bottom from the side 3 clamps - from below 2 metal rollers, smooth, pulling - from the bottom 2 double rollers, pulling, rubber - pneumatically pressed shafts ...

CATALOG NO. 7220 TECHNICAL DATA - min – max width of the processed element 20 – 230mm - min – max height of the processed element 8 – 160mm 7 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) vertical left 160mm 5.5kW 6) horizontal top 230mm 7.5kW 7) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 10 pulling, toothed and metal input rollers, including 2 double rollers - 3 side pressures from down: - pressure from the side at the insertion - input shaft, toothed, pulling, turning in the lower tabletop - 2 pressure points from the side - grooved top - drawing roller, metal, grooved - drawing roller, metal, smooth - pneumatically adjustable rollers - length of the introductory tab ...

CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...

Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...