subcategories
(3rd category level)
Manufacturer:
(Category: 204)
Description: Carpet width: 1100 mm  ,  , Internally equipped with a hard rubber roller and a steel roller with adjustability. Mountable canvas maximum dimensions: 1100 x 1910 mm.Approx. Onsite Dimension. (l x w x h): 1,900 x 1,900 x 2,100 mm, weight approx.: 2,500 kg ... more information
Description: Various random orbital sanders , with mobile extraction unit , Additional accessories Sanding discs in various grit sizes, mostly unused Vacuum cleaner bags suitable for extraction system Including cabinetApprox. Onsite Dimension. (l x w x h): 1,200 x 1,000 x 1,900 mm, weight approx.: 100 kg
Description: Eccentric sander with dust extraction RUPES S 235 EP, power 2500 W, 230 V, with compressed air connectionApprox. Onsite Dimension. (l x w x h): 700 x 700 x 800 mm, weight approx.: 10 kg ... more information
Description: well maintained and powerful wide-belt sander with technical specs as follows: sanding width 1350 mm workpiece thickness 3 - 160 mm feed speed 3 - 15 m/min (frequency controlled) vacuum feed-belt cross sanding unit 15 kW, belt speed 2,0 - 20 m/s (frequency controlled), dimensions of sanding belt 4800 x 150 mm length sanding unit 15 kW, belt speed 1,8 - 18 m/s (frequency controlled), ,dimensions of sanding belt 2620 x 1400 mm length sanding unit , with pressure lamella belt 15 kW, belt speed 1,8 - 18 m/s without pressure lamella belt and 1,8 - 9 m/s with pressure lamella belt, ,dimensions of sanding belt 2620 x 1400 mm pressure beam with computer controlled selctive pressure control system (CSD) with stepless pressure adjustment of the single pressing elements. Distance of the rolls 16 mm structure brush 11 kW, diameter 250 mm, oscillating cleaning brush 0,75 kW, ...
Description: Cross belt unit Wide belt unit ( contact roller ) Wide belt unit (combi) Wide belt unit (cushion) Brush unit Sanding pad Working width 1350 mm Working height 850 mm Workpiece height 4 - 150 mm Hours read off approx. 5'745 without laptop and without sanding time recording without hand scanner and without compressed air lines on the machine Replaced parts: Replaced brake module from the sanding belt and frequency converter from the feed, with operating instructions and CE certificateserial number: 91.445.30, total electrical load: 73 kW, hollow height: 4-150 mm, Approx. Onsite Dimension. (l x w x h): 2,900 x 2,350 x 2,440 mm, weight approx.: 5,000 kg
Description: • Wide belt calibrating and sanding machine • Serial number AE/019301 • Total installed power approx. 18 KW • Sanding width approx. 1100 mm • Workpiece thickness from 4 mm up to 170 mm • Motorized height positioning • 2 feed speeds • Feed motor power 0.45 KW • Aggregate 1: grooved steel calibration roller with diameter approx. 180 mm • Aggregate 2: combined rubber roller and sanding pad • Both groups are driven by an 15 KW motorApprox. Onsite Dimension. (l x w x h): 2,700 x 1,700 x 2,250 mm, weight approx.: 1,700 kg
Description: - Edge profiling, sanding and painting system - Serial number 03083 - Total installed power 117 KW - Working width from 200 mm up to 2500 mm - Workpiece thickness from 6 mm up to 80 mm - Minimum workpiece length 90 mm - Adjustable feed speed from 5 m/min up to 44 m/min - Power of the feed motors: 7.50 KW and 0.75 KW - Power of the machine opening motor 1.50 KW - Machine equipped identically on both sides with 9 units on each side: - 1 - Milling unit: adjustable in depth, height and inclination, motor 7.50 KW-6000 rpm - 2 - Milling unit: adjustable in depth, height and inclination, motor 4 KW-3000 rpm - 3 - Fine milling unit: upper and lower motor with 1.80 KW-12000 rpm each, tiltable up to 45° - 4 - Belt sanding unit: motor 2.20 KW-940 rpm, swiveling, height and depth adjustable, with pneumatic sanding pad - 5 - Belt sanding unit for upper bevel: Motor 1.10 KW-930 rpm, swiv ...
Description: • Varnish Wide belt sanding machine • Serial number SA/003641 • Total installed power approx. 23 KW • Sanding width 1100 mm • Workpiece thickness up to approx. 170 mm • Motorized height positioning with digital reader • Vacuum transport belt, F.LLI FERRARI vacuum unit with motor power 4 KW • Feed motor power 1.50 KW • Aggregate 1: grooved rubber sanding roller, with blowers • Aggregate 2: sanding pad, with blowers • Both groups are driven by an 15 KW motorApprox. Onsite Dimension. (l x w x h): 2,000 x 1,850 x 2,450 mm, weight approx.: 2,300 kg
Description: • Contour sanding machine • Oscillating sanding belt 120 mm wide • Tiltable sanding head 0 °- 90° • Main motor 1.50 KW-2800 rpm • Table dimensions 480 x 220 mm • Maximum sanding height approx. 105 mmApprox. Onsite Dimension. (l x w x h): 1,100 x 450 x 1,050 mm, weight approx.: 120 kg
Description: • Inflatable drum sander • Voltage 380 V • Approximate dimensions of the drum: length 210 mm, diameter 140 mmApprox. Onsite Dimension. (l x w x h): 1,000 x 360 x 1,000 mm, weight approx.: 100 kg ... more information
Description: RUPES orbital sander and dust extractor 230 V, 3500 W With compressed air connectionApprox. Onsite Dimension. (l x w x h): 900 x 400 x 600 mm, weight approx.: 15 kg ... more information
Description: • Wide belt sanding machine • Serial number 5953NOVA • Total installed power 30 KW • Sanding width approx. 1320 mm • Workpiece thickness from 4 mm up to 160 mm • Motorized height positioning with digital reader • Device for automatic positioning of the table according the required thickness • Vacuum transport belt, CIMME GCH 005020 vacuum unit with 5.50 KW motor • Belt conveyor with variable feed speed from 3 m/min up to 18 m/min • Feed motor power 2.20 KW • Aggregate 1:electronic sectioned sanding pad, motor power 11 KW, with blowers • Aggregate 2:electronic sectioned sanding pad, motor power 11 KW, with blowers • Dimensions for transport 3200 x 2440 x 2380 mmApprox. Onsite Dimension. (l x w x h): 2,080 x 2,440 x 2,380 mm, weight approx.: 2,700 kg
Description: • Long belt sander • Serial number 13253 • Table dimensions 2850 x 800 mm • Vertical stroke approx. 500 mm with motorized positioning • Transverse travel approx. 800 mm • Main motor 3.30 KW • Manual sanding padApprox. Onsite Dimension. (l x w x h): 4,100 x 1,550 x 1,650 mm, weight approx.: 550 kg
Description: • Wide belt sanding machine • Serial number SA/003937 • Sanding width approx. 1350 mm • Workpiece thickness from 4 mm up to 170 mm • Vacuum transport belt, F.LLI FERRARI vacuum unit power 11 KW • Belt conveyor with variable feed speed • Feed motor power 4 KW • Aggregate 1: EPICS TA-46 transversal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 6550 x 150 mm, motor power 11 KW • Aggregate 2: EPICS K-RP 46 combined roller and sanding pad aggregate: roller diameter 220 mm, 46 sectors,sanding belt dimensions 2620 x 1370 mm, motor power 18.50 KW, with blowers • Aggregate 3: EPICS PE-46 electronic sectioned sanding pad: 46 sectors, sanding belt dimensions 2620 x 1370 mm, motor power 15 KW, with blowers • Aggregate 4: brush unit • HYDRA RTC electronic management control, Windows environment • Dimensions for ...
Description: • Contour sanding machine • Oscillating sanding belt 120 mm wide • Tiltable sanding head 0 °- 90° • Main motor 1.50 KW-2800 rpm • Table dimensions 480 x 220 mm • Maximum sanding height approx. 105 mmApprox. Onsite Dimension. (l x w x h): 1,300 x 620 x 1,120 mm, weight approx.: 120 kg
Description: • Contour sanding machine • Oscillating sanding belt 120 mm wide • Tiltable sanding head 0 °- 90° • Main motor 1.50 KW-2800 rpm • Table dimensions 480 x 220 mm • Maximum sanding height approx. 105 mmApprox. Onsite Dimension. (l x w x h): 1,100 x 450 x 1,050 mm, weight approx.: 120 kg
Description: • Wide belt calibrating and sanding machine • Serial number 1454 • Total installed power 12.50 KW • Sanding width 1100 mm • Workpiece thickness from 3 mm up to 160 mm • Motorized height positioning with digital reader • 2 feed speeds:  ,7 - 14 m/min • Feed motor power 1.18 KW • Aggregate 1: grooved rubber calibration roller with diameter approx. 180 mm, motor power 9.20 KW • Aggregate 2: combined rubber roller and sanding pad aggregate, motor power 7.50 KWApprox. Onsite Dimension. (l x w x h): 1,920 x 1,800 x 2,200 mm, weight approx.: 1,750 kg
Description: • Orbital belt sander • Ideal for sanding chair components with round or oval sections and for chamfering edges of square or rectangular workpieces • Serial number 920170 • 2 feeders (input and output) with 0.26 KW motors each • 2 sanding bands measuring 1220 x 70 mm • Sanding motor power 4 KW • Passage diameter 170 mmApprox. Onsite Dimension. (l x w x h): 1,300 x 850 x 1,400 mm, weight approx.: 300 kg
Description: • Lower sanding machine, bottom belt sander • Serial number 5/26 • Sanding belt with oscillation, 2.20 KW-1420 rpm motor • Table dimensions 370 x 350 mm • Working width approx. 200 mm • With roller feederApprox. Onsite Dimension. (l x w x h): 700 x 700 x 1,350 mm, weight approx.: 300 kg
Description: • Spindle sander, profile sander • Tilting Spindle • Head vertical travel approx. 550 mm • Worktable dimensions 720 x 700 mm • Worktable height from the floor 835 mm • Motor power 1.20 KW-1430 rpm • Portable, with wheelsApprox. Onsite Dimension. (l x w x h): 800 x 760 x 1,400 mm, weight approx.: 250 kg