grinding machines used for sale

SAMCO Unilev N15 Edge Grinder Two-speed sanding belt Pneumatic oscillation Adjustable table at an angle of 0-45 Sanding belt height 150mm Snap for curvilinear elements Sanding belt 2160x150mm Extraction nozzle 120mm Motor power: 3kw  ... more information

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

equipped with: -2 milling units -1 long belt sanding unit -3 buffing units/profile grinding units  ... more information

CATALOG NO. 6985 TECHNICAL DATA - max width of the workpiece 300mm - height of the workpiece 200mm - unit: corrugated rubber roller + shoe + metal roller - working table 1230x440mm - belt 300x1900mm in advance: - rubber roller, sliding - aggregate about 7.5 kW - sliding roller, rubber from down: - pulling tape - pneumatic oscillation - 2 types of feed speed - feed motor 0.85 kW - diameter of the exhaust connection 110mm - dimensions length/width/height 1250/1000/1950mm - weight 530 kg – unpainted – used grinder - very good condition Net price: PLN 13900 Net price: 3124EUR Net price calculated according to the exchange rate of 4.45 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Handcuper Meinert PH6 for gate saws  ... more information

OMAB crooked and straight grinding machine  ... more information

Code: 0116 Brand: GHERMANDI - ITALY Model: OLIMPIA 200 Bottom belt sanding machine for sanding wooden edges, profiles, battens, etc. Technical data: Working width mm 200 Table length mm 1240 Belt development mm 2000 x 200 Belt speed 17 mt/min Working table height mm 820 Motor Hp 4 Vacuum motor Hp 0,5 Overall dimensions mm 1240 x 600 x 1000 h Weight kg 350

Code: 0206 Brand: SBF STEFANI Model: WS 125 - CE Standard Automatic 2-belt calibrating sanding machine for wood, furniture, panels, doors, frames, composite materials and various - CE Standard Technical data: Max working width mm 1300 Max working height mm 160 Min working height mm 3 Sanding belt size mm 2620 Composition: 1° Calibrating unit diameter mm 275 rubber coated SH 90 - Manual roller height adjustment - Motor Hp 20 2° Sanding Finishing unit with height adjustable sanding pad - Motor Hp 15 Automatic table positioner Infeed and outfeed roller conveyor Infeed safety barrier Automatic table lift Compressed air Atm 7 Overall dimensions mm 1960 x 2700 x 2400 h

Automatic oscillating curve grinding machine Grinding width 300 mm Grinding height from 3 - 100 mm Feed continuously from 25 - 25 m/min Feed motor 0.55 KW Drive motor 7.5 kW Grinding belt 320 x 2000 mm  ... more information

Festo Grind hedgehogs Diameter 145mm Grinding height 120mm for grinding sleeves G&-5000-M356V  ... more information

SPECIFICATIONS: VIET S3 333 INF. I Steel roller diameter 250 mm II Steel roller diameter 250 mm III Rubber roller with Shore 60, diameter 250 mm Grinding width mm: 1350 Sanding belt dimensions mm: 2620 x 1380 VIET S3 333 TM I Steel roller diameter 250 mm II Steel roller diameter 250 mm III Rubber roller Shore 60, diameter 250 mm Scotch Brite Unit Vacuum Transport Carpet Grinding width mm 1350

Edge sanding machine Kündig LBK 160 mobile Rotary table for extraction various ribbons The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

SPECIFICATIONS: Installed power: 5.5 kW 2 flywheels Ø 450 mm Sanding belt length: 4900 mm 2 speed settings  ... more information

SPECIFICATIONS: Grinding/calibration line Editing: from above and below 2 motors with 18.5 KW each Cardan drive Sanding belt dimensions mm: 2,620 x 1,180 Vacuum carpet  ... more information

– after technical inspection – very good condition – German production – year of production 1996 – segmented shoe - the perfect solution for varnish / veneer TECHNICAL PARAMETERS: grinding width 1100 mm grinding height 1-150 mm Combo unit with task-controlled membrane grinding shoe aggregate motor power 11 kW blowing on the tape pneumatic oscillation two types of belt speeds of 4.5 and 18 m/s Aggregate with felt shaft engine power 0.75 kW shaft oscillation Unit with cleaning brush engine power 0.75 kW smoothly adjustable feed feed speed range 4-18 m/min feed motor power 1.5 kW electric height adjustment vacuum table fan motor power 3 kW connector diameters 4 x 120 mm, 1 x 150 mm transport dimensions (L/W/H) 200 x 245 x 210 cm weight 2500 kg 1. The Alpha Combi unit is a grinding unit with a contact shaft with a di ...

– Italian production – transverse aggregate, the so-called sergeant – year of manufacture 2011 – electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum element length 365 mm vacuum table 1 unit: transverse tape, the so-called sergeant engine power 12 kW 2 aggregate: rubber shaft hardness 95 shore diameter 240 mm engine power 18.5 kW 3 aggregate: rubber shaft hardness 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 unit – cleaning brush 2.2 kW 6 aggregate – blowing blowing on the tape pneumatic oscillation feed speed 2,5 - 18 m/min pneumatic tape tension electric height adjustment connection diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (L/W/H) 370 / 250 / 250 cm wei ...

– Italian production –Ce – automatic table positioning – year of production 1999 TECHNICAL PARAMETERS: grinding width 900 mm grinding height 165 mm 2 steel shafts pneumatic oscillation electric height adjustment two types of feed speed engine power 11 kW minimum element length 300 mm connection diameter 2 x 160 mm dimensions of the machine (L/W/H) 150 / 115 / 200 cm weight 700 kg

– after technical inspection TECHNICAL PARAMETERS: .max. workpiece width 110 cm .max. workpiece height 16 cm 2 aggregates: 1) AGGREGATE RUBBER roller 2) aggregate with combo boot with pneumatic pressure rollers, rubber, pressure between aggregates oscillation of pneumatic tapes automatic belt centering system potentiometer for setting the planing thickness FEED SPEED SMOOTHLY ADJUSTABLE power of the first unit 18,5 kW power of the second unit 11 kW working pressure 6-8 bar extraction connection diameter 2 x 250 mm dimensions (L/W/H) 195 / 185 / 215 cm weight 1750 kg

– after technical inspection – very good condition TECHNICAL PARAMETERS: maximum grinding width 1100 mm maximum element height 160 mm minimum grinding height 3 mm main engines 2 x 11 kW feed motor 2,2 kW height adjustment motors 0,37 kW 1 65 shore rubber shaft with a diameter of 270 mm 2 45 shore rubber shaft with a diameter of 400 mm belt size 2600 x 1050 mm two types of feed speed pneumatic oscillation at the ends connection diameter 2 x 150 mm tape in very good condition dimensions (L/W/H) 280 / 180 / 250 cm weight ~ 2600 kg

usable grinding wheel outer Ø: 600 mm Table size: 470 x 950 mm Table tiltable down/up to: 45/30° Table height above corridor: 950 mm Grinding wheel speed: 940 rpm Grinding wheel drive: 380 V, 940/1140 rpm, 2.2/2.5 kW Weight: 237 kg  ... more information