presses used for sale

throat: 900mm; feed: 15 m/min;  ... more information

see photos  ... more information

Frame Press - Edge Press Standing / Vertical workpiece dimensions - Solder: 2500mm - Width: 1250mm Press pressure motorized, 3-stage  ... more information

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

L 22 Kw POWER 330 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 22 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

HF Press Manufacturer Ormamacchine High-frequency continuous belt press Manual glue application incl. Laying table / filling bed 5000 x 1400 mm Press 4600 x 1400 mm Roller conveyor outlet 5000 mm Workpiece thickness max 200 mm Side printing cylinder 10 Pressing force 110 t RF Generator 40 Kw Dimension: 16000 x 3200 mm

SERGIANI 2 - Floor Continuous Press Model Leopida/Leomatic Slide-in table 6,000 mm x 1,400 mm Press 5,000 mm x 1,400 mm Discharge roller conveyor 4,000 mm x 1,400 mm  ... more information

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

For sale second hand briquett press made by DIPIU. Completely renewed with overhauiln. Model MB 70. Price: 69.000 EUR EXW  ... more information

For sale second hand briquett press mde from CF Nielsen, model BP 6500, cy 2008, well condition. Price: 95.000 EUR  ... more information

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

SPECIFICATIONS: Hydraulic hot press Dimensions of the work table mm: 3,000 x 1,300 Mounted serpentine table Maximum temperature: 120°. Number of pistons: 6 diameter Ø 65 mm Installed capacity KW: 30,5 Complete with intermediate plate Diathermal oil operation Complete with electric oil boiler

Hydraulic press Pellegrini Hot water Pressing area 4000 mm x 1300 mm manual glue application incl. Insertion table Acceptance: Vacuum - Gantry forklift SIRIO  ... more information

installation consisting of the following components:- glue station for 2-component glue- Input table with motorized rollers and 90 ? rotation- Composition table and loading in the press- Press model FAST / 130- Horizontal pressure installation mounted on adjusted beam- Outfeed roller conveyor, not motorisedtechnical data:dimensions of strips:length: 900 to 8,000 mmwidth: 20 to 45 mmheight: 50 to 200 mmplates to be produced:length 8000 mm, 2 x 4000 mm, 4 x 2000 mm or 4 x 900 mmBonding press:Dimensions: 1300 x 8500 mmpress opening: 250 mm.Total pressure: approx. 200 tons12 x overhead hydraulic pressure cylinders2 rows of cylinders can be switched off17 x lateral cylinders, individually switchablehorizontal pressure 7 kg / cm?Attached electric boiler for thermal oil

I sell a press for adhesive wood gluing LISY DVORAK TH6, built in 2008. Material size 2600 X 1050 x 50mm 6 work surfaces, manual rotazion. 6 pcs hydraulic top pressures per area / pump 1.1KW 6 pcs manual pressures per area Self-weight 1350kg. Very good condition. Available the same.  ... more information

SPECIFICATIONS: Dimensions of the plate mm: 2300 x 1000 Number of pistons: 04 Piston diameter mm: 60 Water operation with boiler  ... more information

Pellet mill for ring DIE and two roll shell system. Inside diameter: 900 mm Active operating width: 138mm Active forming area: 3902 cm² Press roll Ø440/142 optionally dimpled or notched Front door Stainless steel front door with large opening angle. pneumatic operated overload bypass protection gate. Two knives with step less length adjustments integrated in the door. Machine housing All housing parts are cut by precision laser. The machine base, the base plate and the housing are welded and reinforced. Drive Drive via 355 kW-1200 rpm engine , timing belt Ø200/1900 - Beltdrive Motor and Motor cables not included. Equipment Central lubrication for roll assembly and main shaft Manual roll adjustment Overload protection provided by a safety pin Die of chrome steel X46 Cr13 with conical seat for an easy change of the die - Die is not included Adj ...

Multifoiler BTF 1528 -1400 Rotation Standard machine version: 1- one combination of lay-up, turning and unloading 2- BTF Multifoiler 3- Multi-Pin-System Useful area 1330x2630 mm Max size of board 1250x2550 mm Min foil width 1400 mm  ... more information

I sell a body press for furniture element mount RAMARCH PN31T. Year of construction 1997. Material size 2500 x 1300 x 600mm Version with rear transport track for finished elements. Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

I sell a body press for furniture element mount RAMARCH PN31. Year of construction 1998. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.  ... more information