presses used for sale

Hydraulic frame press Hungerbühler Press-Measurement: 4100 x 3050mm 3 vertical cylinders 3 horizontal cylinders Height adjustment via control box Width adjustment via control box Supports at the bottom for gluing wings at working height. The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

SPECIFICATIONS: Vertical frame press Hydraulic regulation working length mm: 3,000 working height mm: 2,000 2 horizontal beams with 2 hydraulic clamps  ... more information

pressure: 40 tdistance between columns: 700 mmstroke: 150 mmtable surface area: 700x650 mmram surface: 670x650 mmhole in the table: Ø 120 mmtable height: 850 mmweight of the machine ca.: 4 tdimensions of the machine ca.: BxTxH 2000x18000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tdistance between columns: 625 mmstroke: 150 mmtable surface area: 580x450 mmram surface: 580x340 mmhole in the table: Ø 150 mmtable height: 850 mmtool hole in ram: Ø 45 mmcolumn travel -side: 200x200 mmweight of the machine ca.: ca. 6,0 tdimensions of the machine ca.: BxTxH ca. 1300x1300x2750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3500 mmWorking height: 2650 mmNumber of cylinders: nach Wahl St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Working width: 3500 mmWorking height: 2300 mmNumber of cylinders: 4 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Working width: 3500 mmWorking height: 2300 mmNumber of cylinders: 4 St.Stable frame welded construction of thick-walledSpecial hollow profiles , sliding table and pressure beam with50 mm hole pattern .On the left side continuous abutment for grouting the wide ,lower abutment in 2 levels.Vertical pressing cylinder on specialty bar with one-quick adjustment with weight compensation in the 50 mm hole patternadjustable in height. Long sliding table ensure thecontinuous recording of high jacking forces .Fast, smooth width adjustment with ball bearingCarriage with central fixation in 50 mm hole pattern.Upper horizontal press cylinder infinitely adjustable in height andequipped with counterbalance .Lower horizontal pressing cylinders with bore fortwo abutments levels without weight compensation .Abutment and pressure plate depth 100 mmMachine controlled electro -hydraulic with 2 pieces vertical ...

Working width: 3500 mmWorking height: 2300 mmNumber of cylinders: 4 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

pressure: 400 tstroke: 300 mmtable surface area: 1200 x 700 mmram surface: 1200 x 700 mmdayligth: 500 mmadjustment of stroke: 300 mmreturn capacity: 348 kNcapacity of ejector: 100 kNejector stroke: 100 mmtotal power requirement: 65 kWweight of the machine ca.: 28 tdimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m= Frame pressAccessories: tool changing table- next safety inspection according to stamp 05/2021 -- with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 4000 mmWorking height: 2600 mmNumber of cylinders: 6 St.weight: 2000 kgDimensions (L/W/H): 5550x1300x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Min/Max. workpiece length 1800 / 4200 mm.Max. profile height 200 mm.Min. Workpiece thickness 16 mmWorking height 950 mm.Power installed 12 kW ... more information

Machine for the postforming of laminate on rounded boardsUsefull length: 4200 mmPanel width: 200 - 1300 mmLaminate heating by infrared beamBending process by jig that is pneumatically loaded ... more information

High frequency - miter press Miter assembly machine Miter gluing machine Brand: Grum-Schwensen Model: HF 120 High frequency device Manufacturer: Himmel / Himmelwerk Model: HG 3300 Workpiece cross-section max.: 100 x 100 mm PVAC glue / white glue  ... more information

Table size 2800x1500 Number of table 2  ... more information

Working width: 120 mmWorking height: 1200 mm: 6000 mmNumber of cylinders: 12 St.1 pcs Laminating type SLV - H - 6.0 - 1.2 - 120 - 6V - IISpecifications- Working dimensions: Length: 6000 mm Height: 1200 mm Verleimdicke: 40 - 120 mm- Number of cylinder pressure: 12- Cylinder type: Ø 63 x 120 mm- Max. Force per cylinder pressure: 50 kN- Specifischer pressure: 7.4 kg / cm2- Number of hold: 6- Cylinder type: Ø 40 x 150 mm- Max. Force per hold-down: 20 kN- Number of section: 3- Max pressure: 160 bar.- Power: 3.0 kW- Pump flow: 10 l / min- Each impression cylinder and the hold-separate absperbar- Manual control with (Italian) hydraulic valves- Equal pressure in all sections- Parkiplatz for the (2x3) holding-down device to each side of the press- The dismantling pressing bar, 2 pcs, each 3 m long(. According to Manufacturer SpecificationsThe data for this ad was created with ModulMWS  ...

Press with press area 2200 x 1100 with built-in mould press  ... more information

Koller sleeves punched for CPM 22-2.5  ... more information

Koller sleeves Geriffelt for CPM 22-2.5  ... more information

Collier sleeve Fishbone CPM 22-2.5 for pellet press  ... more information

Graf Koller sleeves punched for CPM 16-2.5 Pelletier press  ... more information