presses used for sale

Description: • Perforated plate hydraulic press for chairs • Serial number 1227 • Table dimensions 1540 x 940 mm • Main table with 2 positionable hydraulic pressure cylinders • Lower table with 2 hydraulic pressure cylinders, table dimensions 500 x 500 mm • Hydraulic pump with motor of 1.10 KW-2850 rpmApprox. Onsite Dimension. (l x w x h): 1,660 x 1,250 x 900 mm, weight approx.: 400 kg

Description: Pressure 80 to 200 tons, heating surface 1300 x 3500 mm, 6 cylinders in total, without CE certificate ,Approx. Onsite Dimension. (l x w x h): 4,300 x 1,500 x 2,300 mm, weight approx.: 6,000 kg ... more information

Description: A total of 6 cylinders, adjustable in height, without wood, with screw clamps approx. 15 pieces, without further accessories ,Approx. Onsite Dimension. (l x w x h): 2,500 x 1,200 x 2,000 mm, weight approx.: 380 kg ... more information

Description: Internal height min. 200 mm, max. 1350 mm Width min. 200 mm, max. 2500 mm Without CE certificate Voltage 400 V Pressure according to technical documentation up to 2000 kpApprox. Onsite Dimension. (l x w x h): 3,300 x 1,100 x 2,500 mm, weight approx.: 2,000 kg ... more information

Description: • Semi-automatic pneumatic carcase press • Entrance table length 1650 mm with belt width 600 mm • Maximum workpiece dimensions to press approx. 2200 x 600 x 1200 mm • Minimum pressing workpiece length approx. 300 mm • Minimum pressing workpiece height approx. 300 mm • 4 pneumatic horizontal cylinders and 4 vertical ones • Vertical pressure from 0 up to 1900 kg • Horizontal pressure from 0 up to 600 kg • Feed speed from 12 m/min • Adjustable clamping timeApprox. Onsite Dimension. (l x w x h): 5,600 x 1,200 x 2,610 mm, weight approx.: 1,800 kg

Description: • Carcase press • Pneumatically driven • 3 x 2 vertical pressing cylinders • 2 x 2 horizontal pressing cylinders • Maximum workpiece dimensions approx. 2600 x 600 x 1400 mmApprox. Onsite Dimension. (l x w x h): 3,500 x 1,050 x 2,350 mm, weight approx.: 800 kg ... more information

Description: • Heated veneer press • Serial number A1430106 • Total installed power 16 KW • Working surface 3000 x 1300 mm • Maximum opening approx. 400 mm • Total force 70 T • 6 pressure cylinders diameter approx. 70 mm, hydraulic motor power 1.50 KW-1420 rpm • Pressure and pressing temperature are adjustable • Heating of the plates by electric resistancesApprox. Onsite Dimension. (l x w x h): 3,460 x 1,700 x 1,900 mm, weight approx.: 3,500 kg

Description: • Veneer press • Working surface 2500 x 1300 mm • Maximum opening approx. 430 mm • 4 pressure cylinders diameter approx. 90 mm, hydraulic motor power 1.47 KW-1450 rpmApprox. Onsite Dimension. (l x w x h): 2,920 x 1,570 x 2,100 mm, weight approx.: 3,200 kg ... more information

Description: Manufacturer: Grecon Dimter Press for massive wood panels Machine type: ProfiPress 2500HF-3 Serial number: 2456.32, year 2005 Timber data: Type of timber: softwood or hardwood Infeed length (min/max): 400/2500mm Parallel width (min/max): 30/170mm Parallel height (min/max): 8/60 mm, for soft wood 8/40 mm, for hard wood Dimensions: cca 9.000 x 7.300 x H2.000 mm Supply of power: 400V, 50Hz, 92 kW, Weight: 15.000 kg The line consists of: 1. Transversal infeed station with gluing unit 2. Press 2500 x 1300mm with HF Generator 40 kw, Cavallo 3. Splitter saw 4. Transport table Attention! The line may be dismantled after 15.07.2024Approx. Onsite Dimension. (l x w x h): 9,000 x 7,300 x 2,000 mm, weight approx.: 15,000 kg

Description: maximum panel length: 3000 mm working height : 1000 mm panel thickness 25 - 90 mm number of working units 6 pcs maximum weight allowed / work unit 150 kg number of clamps / working unit 8 pcs clamping mode of the clamps pneumatic number of pneumatic motors 1 pc (Ingersoll 3840 P) top panel pressing mode pneumatic number of vertical pressing pistons 1 piece compressed air pressure 1/2 - 6 bar electric motor 400V, 50 Hz, 1,5 kW rotating mode of working units: electric Approx. Onsite Dimension. (l x w x h): 4,000 x 3,400 x 3,000 mm, weight approx.: 1,500 kg

Glue star or rotating gluing press Hess Rotor for gluing wood to form panels with 8 pressing surfaces (1,250 mm each). Incl. glue application machine and lots of inlay wood with different dimensions., working area: 2,500 x 1,100 x 80mm, pressing surfaces: 4 x 2, Pressing force: 20,000 N, Hold-down: 4 x 4

Description: Joos electro-hydraulic veneer press with gold anodized plates Brand: Joos Type: EU80 Year of construction: 2010 M-No.: 1948289 Net working dimensions: 3,100 x 1,300 x 350 mm Press type: fine press - heated Adjustment: Electric-hydraulic, with incline press protection Control: Electric-relay controlled Automatic steering via proximity switches Electronic pressure monitoring Stepless pressure setting with constant pressure monitoring Timer: Automatic press opening end of press cycle Technical data: Cylinders: 6 cylinders of ø80 mm Pressure total: 70 tons/700 kN Pressure: Max.2.0 daN (kg)/cm2, distributed over 6 cylinders total 700 kN Weight: approx. 4,000 kg Control: manual , Pressure: analog Time: analog Indicator lights Emergency stop circuit: Safety cord over entire operator side Approx. Onsite Dimension. (l x w x h): 3,300 x 1,350 x 2,400 mm, weight approx.: 4,000 kg

Veneer press Fabr. Bütfering Slabs size 2.3 x 1.3 m Electric 4 cylinders diameter 120 mm Hydraulic with safety leash  ... more information

Veneer press Ott Type: JU 65 Pressing surface 2250 x 1200 mm 2 electrically heated plates Total pressing pressure 65 tons Spec. Pressing pressure at full occupancy 2.4 kg/cm² Spec. Pressing pressure at 2 m² occupancy 3.25 kg/cm² Printing cylinder 4 x diameter 80 mm Rack and pinion guide Maximum opening between plates 300 mm Connection per heating plate approx. 6.0 kW Hydraulic pump approx. 1.1 kW Total connected load 12 kW Heating time approx. 20 min. Dimensions 2600 mm x 1330 mm x H 1760 mm Weight approx. 2800 kg

Wemhöner Wood Press Size : 250 cm x 120 cm Double table Machine is in a good working condition ... more information

SPECIFICATIONS: Working width: 3000 mm Working height: 2000 mm 03 Presses for vertical capping 02 Presses for horizontal capping Hydraulic machine  ... more information

I am selling a heavy briquetting press RUF RB440. Year of construction 11/2002 Motor power 30kW Productivity Number 400 pcs. wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total weight 3000kg Equipment on the right - right entry box. Condition after full remont/500Mtstd warranty like new. Available soon. With full documentation and CE.

Dresan 11 hot plate hydraulic press. Four pistons and 6 kg/cm2, automatic opening with timer or manual opening using a lever. Includes thermal and hydraulic oil. Circulation pump and thermometer. It works perfectly and can be viewed at any time. ... more information

Code: 0252 Brand: COLOMBO Model: 13/8 Presses (No. 2) suitable to bend different types of materials such as solid wooden strips and veneer - es: curved plywood, shells for chairs, seats, sofas, etc. - Equipped with with high-frequency generator The presses can work with mould and counter-mould or with steel-belt 1° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h 2° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h High frequency generator GIORDANO COLOMBO Overall dimensions mm 1100 x 1100 x 1900 h

Four-level gluing press Altec MVP 6/16 for pneumatically gluing solid wood workpieces in 8 positions including steel press attachments., workpiece length: max. approx. 2,500 mm, Workpiece width: max. approx. 800 mm, workpiece height: max. approx. 70 mm ... more information