presses used for sale

Machine is in very good condition Plate dimensions : 1150 mm x 2250 mm Total pressing force : 60 Ton Piston diameter : 70 mm ... more information

MSM VMP 3016 membrane press in TOP condition from 2021 Workpiece length: max. 3,000 mm Workpiece width: max. 1,580 mm Vacuum pump: 25m³/h Dimensions set-up: 3,350 x 1,810 x 910 mm Weight: approx. 450 kg There was very little use of the press. The membrane is in very good condition. #8058 Net price plus VAT

Briquetting press 1000 kg/h approx. 55 kW Diameter 75 mm  ... more information

Code: 0578 Brand: SORMEC 2000 - ITALY Model: 10000 - Norme CE Automatic cold press for panels, polyurethane foam, industrial shed doors, perimeter walls, foamed panels, insulation panels, laminates and various - CE standard Technical data: Working dimensions mm 10000 x 1500 Workpiece passage mm 2000 Opening mm 1000 Height of roller table mm 500 Motorised roller conveyor for workpiece feed with possibility of forward/backward movement N° 18 pistons diameter mm 70 N° 2 hydraulic power unit Pistons opening/closing choiceor Pressing timer Safety protection nets Power Kw 10,3 Compressed air 7 bar Overall dimensions: mm 10500 x 2300 x 3300 h Weight kg 19000

Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Tine press Fabr. Hungerbühler / Humag Pneiummatic up to 20 bar  ... more information

Emergency stop strip, control by button, gold anodized plates---------- Technical Data ---------- pressing area: 2,500 x 1,250 mm, max. opening height: 400 mm, Number of cylinders: 4 piecesSold as is, without technical inspection ... more information

Cold pressPress platen sizes: 3100 x 1300 mm.Opening: 420 mm6 hydraulic upstroke rams: 6 x 70 mmTotal pressure: 70 tons ... more information

Emergency stop line, control by button, steel plates, oil boiler heating system, receptacle for mylar foil---------- Technical Data ---------- pressing area: 3,000 x 1,300 mm, max. opening height: 400 mm, number of cylinders: 6 pieces, weight: 4,400 kg, dimensions: 3,700 x 1,800 x 2,100 ... more information

Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

SPECIFICATIONS: Cold press Working table mm: 2500 x 1300 No. 4 pistons Vertical stroke: 450 mm  ... more information

Embossing press - embossing machine Hydraulic Pressing surface, 600 x 2700mm Heated pressing surface  ... more information

-Exhibition machine----------- Technical data ----------Briquette : 60 mm, hydraulic power unit 3 kW: 140 bar, voltage: 400 V, frequency: 50 Hz, fuse: 16 A, power approx.: 20-35 kg/h, weight approx.: 300 kg- Simplest handling- Hydraulic control- Briquette diameter 60 mm- Briquette length adjustable as desired (max. 60 mm)- Motor equipped with motor protection switch and emergency stop- No electronic components such as controllers, sensors and sensors or complicated controls- Large storage container- Briquette tongs tempered- Press rod replaceable- Presses without the addition of additives- Thanks to the pre-compressor, even voluminous chips can be processed- No adjustment work or monitoring of the pressure necessarynew exhibition machine

On sale is a complete line for the production of longitudinal and transverse plates. 1. Weinig Dimter high frequency press. 2. Grecon Ultra4 longitudinal line. 3. Line for width connection Obel. 4. Hobelrotoles. 5. Timesavers 1350 mm grinding machine with three units. 6. Planer Schenko (with lifting platform for parcels) + conveyor belt + charger. 7. SLH cold width press. 8. Thermal tunnel for individual packaging of plates. 9. Glue applicator Inles. 10. Glue applicator for slats. 11. Obles line for longitudinal connection of slats.

Dimensions: 2,200 x 1,100 mm heating plate size Gold anodized heating plates 400 mm table opening height 4 hydraulic cylinders 50 tons of pressing pressure Stroke limitation Automatic opening Electrical opening and closing of the press table  ... more information

RPW 3000 plus Frame press Clamping dimensions 1600x2900mm Frame 1600x2600mm Contact pressure of 1 t, self-locking, 140 mm travel Versatility - many applications (frame, body, surface gluing) Work facilitation - ergonomic posture Time savings due to user-friendly operation Frames are bolted and can therefore be dismantled Galvanized press units Basic: 3 pressing units with adjustable angular gears, 150mm adjustment range with 2 tons of compressive force! and 90° stop G&FE-RPW-3000PL OPTIONS AT EXTRA COST: Side pressure device with 2 angular gears Hold Chassis

Glue Gluing press Basic: 90° stop 3 pressing units with trapezoidal spindle Clamping dimensions: (H x W)1130 x 1900mm Quick adjustment up to 140mm Easy to use Self-clamping The gluing press from Bavaria Universally applicable Exact and accurate to the angle Can be operated by one user G&FE-LEIMO Options: 1 hold-down device G&FE-VP200-NL 1 press units with rack and pinion adjustment Driving device

Leimo Plus Gluing press The new, innovative gluing press for clamping frames operable by one user for gluing drawers, carcasses, frames and surfaces, etc. Basic: 3 pressing units with angular gearbox 90° stop and lateral pressure device with angular gearbox Clamping dimensions: 1170 x 2300mm 3 pressing units with trapezoidal spindle 1 side pressure with 2 trapezoidal spindles 2700x700x1750mm G&FE-LEIMO-PLUS

SPECIFICATIONS: Double frame press for chair production Hydraulic operation Dimensions: 3500 x 1300 x 2200 mm Protective devices Production: 100 chairs/h  ... more information

Machine for the production of backrests of chairs.  ... more information