presses used for sale

Frame press pneumatic Pressing dimension L 3550 mm x H 1850 mm 3 pneumatic punches from the top 1 sliding press bar from the right with 2 pneumat. Cylinders Bearing surface on the press cylinder 100 x 80 mm Dimensions: Length 4500 mm Width 600 mm Height 2500 mm Weight approx. 500 kg  ... more information

Continuous press Wemhöner Year of construction: 1978 Upper piston press – lower press table is always standing at a constant height Pressing area approx. 4300 mm x 1350 mm 8 pressing cylinders from above was used as a cold press Water pipes available for connection to hot water still electrically connected, in operational condition with 1 roll replacement continuous film 1400 mm wide

Blum Drawerpress ZZM 6300 Boxpress year approx. 2000 Length of runner min 270 mm, max . 650 mm Carcase width min. 300 mm, max 1200 mm Bfxt92krpx Thickness of bottom min.13mm, max. 16 mm Dimensions of machine LxBxH approx. 2000x1200x2000mm Weight 450 kg  ... more information

Frame press Maweg Size: 400 x 240 cm hydraulic 3 vertical cylinders 2 horizontal cylinder Built in 1984 Weight approx. 2500 kg L x W x H: 480 x 110 x 270 cm The machine is in good condition, ready to use. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

SPECIFICATIONS: Working width: 3000 mm Working height: 2000 mm 03 Presses for vertical capping 02 Presses for horizontal capping Hydraulic machine  ... more information

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm Max 700 x 2,500 mm  ... more information

Complete pellet line for biomass or animal feed. CPM 3020-4 with 132 kW motor Including CPM Conditioner, CPM press and Geeelen cooler with fan and cyclone. Positive direct gear drive 132 kW, provides a 98% energy transfer Rounded cast gear case with internal ribbing for quieter operation Segmented die clamps for quicker die changes Metal-to-metal seals between components Modular gearbox design for production flexibility Replaceable quill flange Stainless steel pellet chamber Single motor 132 kW for greater efficiency Very good condition.

I am selling a heavy briquetting press RUF RB440. Year of construction 11/2002 Motor power 30kW Productivity Number 400 pcs. wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total weight 3000kg Equipment on the right - right entry box. Condition after full remont/500Mtstd warranty like new. Available soon. With full documentation and CE.

I sell a heavy briquetting press RUF RB400. Year of construction 11/2012 Engine power 22kW Productivity Number 400 pcs. Wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions: 3000 x 1800 x 2000 mm Combined weight 3000kg Equipment on the right - right entrance box. Condition after full remont/500Mtstd warranty as new. Available right away. With full documentation and CE.

I sell a body press for furniture element mount RAMARCH PN31. Year of construction 2002. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.  ... more information

I sell a body press for furniture element mount RAMARCH PN31. Year of construction 1998. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.  ... more information

I sell a body press for furniture element mount RAMARCH PN31T. Year of construction 1997. Material size 2500 x 1300 x 600mm Version with rear transport track for finished elements. Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

CNC – controlled frame gluing press for automatic gluing of all frame constructions with dowel connection – tine connection – 45° miter connection, automatic centering of the press plates and the upper press beam. The frame presses are available in the following sizes – pressing area 3,000 x 1,700 mm – 3,000 x 2,000 mm and 3,500 x 2,500 mm. Two vertical press cylinders – pressing force per cylinder 7 tons (optional four vertical press cylinders). Two horizontal press cylinders, stroke range 150 mm - pressing force per cylinder 3 tons. Maximum tread depth 130 mm (larger tread depths on request). CNC control from SIEMENS® with touch screen for calling up three automatic pressing cycles, 99 compression programs can be stored per pressing cycle. Among other things, the following parameters can be programmed: frame size, frame profile structure, pressing time, pr ...

SPECIFICATIONS: Cold press Working table mm: 2500 x 1300 No. 4 pistons Vertical stroke: 450 mm  ... more information

SPECIFICATIONS: Hydraulic hot press Dimensions of the work table mm: 3,000 x 1,300 Mounted serpentine table Maximum temperature: 120°. Number of pistons: 6 diameter Ø 65 mm Installed capacity KW: 30,5 Complete with intermediate plate Diathermal oil operation Complete with electric oil boiler

SECOND-HAND HYDRAULIC BENDING PRESS MM. 2400X1300 - Platens mm. 2400X1300 - Opening mm. 1200 - N. 2 cylinders - Top bottom movement  ... more information

Code: 0252 Brand: COLOMBO Model: 13/8 Presses (No. 2) suitable to bend different types of materials such as solid wooden strips and veneer - es: curved plywood, shells for chairs, seats, sofas, etc. - Equipped with with high-frequency generator The presses can work with mould and counter-mould or with steel-belt 1° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h 2° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h High frequency generator GIORDANO COLOMBO Overall dimensions mm 1100 x 1100 x 1900 h

Briquetting press MATEC F-Cube 20 new Dimension press LxWxH: 130x74x112 cm weight 233 kg Briquette square 30x30 mm Capacity approx. 10-25 kg briquettes / hour Size feed funnel approx. 0.33 m3 Motor hydraulic pump 2.2 kW, 3x 400 V, 50 Hz Electricity consumption approx. 1.1 kWh How we work Continuous operation Year of construction 2021 Additional options: - Extension line for briquettes with stand -Auto. Start-stop system for operation with level monitoring - Sensors for level monitoring - Hydraulic oil 30 liters - 3 m cable with Euro plug 16 A - Flange adjustment filter-hopper press The spec. Density of briquettes is about 900 kg / m3. The maximum wood moisture content is 15%. The measured noise level is 62 dB. New machine, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden  ...

STEGHERR 2, 5 m Edge press 2, 5 m length on one side from the bottom with edge - preheating rail Driving device Space requirement approx. L = 2900 B = 600 H = 900mm G &-2789  ... more information

Briquetting machine make Por series A 6 Complete with 36 sleeve filter, aspirator and connection ring to the machine Engine power HP 10 (kW 7.5) Briquette diameter 60 mm Maximum briquette length 50 mm with flat punch Number 14 cycles per minute Production 0.819 m3/h (+/- 10%) with maximum humidity 17% (purely indicative data which may vary based on the physical structure of the material) Dimensions: Height 1430 mm / Front 1660 mm / Depth 1100 mm / Weight 760 kg Inspection door with viewer Automatic start/stop level sensor Electromechanical panel