gluespreader machines used for sale

 ... more information

 ... more information

Description: - Hot gluing of pre-glued strips for finishing linear and shaped panels - Main motor 3.59 Kw -Protection against accidental burns - Height adjustable edge guide - Pre-tape rubber roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.4 - 2 mm - Min/max panel thickness 12/43 mm - Working speed: 7 m/minApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 485 kg

Description: Serial n°: 200.07.006.15 maximum adhesive thickness in 10 mm maximum panel thickness 60 mm maximum thickness of rolled material 3 mm minimum piece length 140 mm minimum workpiece width 70 mm maximum feed rate 12 m/min electric height adjustment pre-heating zone granular gluing system glue container below the food chain changeable glue tank suitable for PUR glue spraying system straightening unit End cutting unit 2 motors flush/radial/bevelling stations 1 Edge copying unit 1 motor scraping unit Edge scraper, Flat scraper polishing unit strip magazine synchronised aggregate NC axis(es) machine model from left to right machine length in 5.140 mm FORMAT 4 E-MOTION control Loading cost to be definedserial number: 200.07.006.15, edge thickness: 10 mm, workpiece thickness: 60 mm, feed: 12 m/min, control: FORMAT 4 E-MOTION, total power approx: 11 kW, Approx. Onsite Dimension. (l x  ...

Description: - Inlet ruler with automatic adjustment and extension 500 mm - BONDING PART A20 BASIC - Pressure zone C with automatic adjustment - Release agent spray unit - Pre- and profile milling unit with pneumatic adjustment - Edge sanding unit KS10 - Profile sanding unit top/bottom PS41 / PS42edge magazine with: 2 -fold roller, serial number: 0-200-21-6055, edge thickness: 0,3 - 3 (20) mm, workpiece thickness: 8 - 60 mm, workpiece overhang: 30 mm, feed: 18 - 25 m/min, joint trimming unit: 2 x 3 KW, gluing unit: A20/QA34/C, snipping unit: HL84 (2 x 0,8 KW), rough trimming unit: 2 x 1,5 KW, fine trimming unit: 2 x 0,4 KW, profile trimming unit: FF12 (4 x 0,4 KW), edge sanding unit: KS10 / PS41 / PS42, flat scraping unit: ja / yes, profile scraping unit: MN21 automatic, edge buffing unit: ja / yes, control: Power Control PC 22, return system: Nein / No, Approx. Onsite Dimension. (l x w  ...

IMA milling unit - several milling motors immediately available from stock - price on request, depending on equipment and condition  ... more information

Brought from Germany. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English.  ... more information

Description: Workpiece: Workpiece thickness: min. 6 mm, max. 45 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Maximum edge thickness: 3 mm Drive: Feed rate: 10 m/min Power: 1.5 kW Control voltage: 24 VDC Compressed Air: Operating pressure: 6 Bar Limit pressure: 8 Bar Connection: Quick coupling, nominal width 7, hose inner diameter at least 12 mm. Air consumption: 5 L/min Machine comes without RETURN ,serial number: 98/1-003, Approx. Onsite Dimension. (l x w x h): 5,335 x 1,670 x 1,415 mm, weight approx.: 3,000 kg

Description: main engine power: 1 kW serial number: 9915 pneumatically driven pressing length approx. 2500 mm tabletop approx. 2500 x 620 mm with electronic temperature control safety light barriers dimensions in mm: approx. 3200 x 1500 x 1900, weight in kg: approx. 1300 serial number: 9,915, Approx. Onsite Dimension. (l x w x h): 3,200 x 1,500 x 1,900 mm, weight approx.: 1,300 kg

Description: Flexline HOMAG PROFI KAL 330/6/A3/S2 edge banding machine  , , , serial number: 0-200-24-9153 is equipped as follows:  , , , HOMAG PROFI TBL 100/35/12 feed table with fully automatic workpiece feeding system WZ10 for workpieces with different dimensions in longitudinal and transverse direction Technical data: - Workpiece length 250 - 2500 mm - Electro-pneumatically controlled cross weigher - Air cushion table ( is not included in the scope of delivery )  , , , 2 HOMAG PROFI KAL 330/6/A3/S2 edge banding machine Technical data: - Universal trimming unit UF11, electro-pneumatically controlled  ,Note: the feedback is not included in the scope of delivery  ,serial number: 0-200-24-9153, workpiece thickness: max.60 mm, feed: 18-25 m/min, joint trimming unit: Ja/Yes, snipping unit: Ja/Yes, fine trimming unit: Ja/Yes, profile trim ...

Description: Cross-cut saw unit : 1 motor / Flush trimming / Raidus trimming / Flat scraper blade Buffing unit Glue thickness max : 8 mm Thickness of roll material max : 3 mm Units synchronised : pneumatic Gluing height max : 50 mm Workpiece length min : 300 mm - Workpiece width min : 90 mm Feed rate max : 10 m/min Strip magazine : Yes Total connection : 12.6 kW ' Some of the technical data is taken from the manufacturer's brochure. Actual values may differ' Machine length : 4,300 mm Milling motors have slight bearing noises - tools must be changed - slight leakage at the DL cylinders. PRICED IN FUNCTIONALLY TESTED CONDITION , SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. , If the photo shows obje ...

Compact and mobile edge banding machine Bi-Matic 4.5 Starter Plus for gluing and processing edge material Including extensive supplies of glue and edge material., Aggregate: 4, Aggregate 1: Caps, Aggregate 2: Round, Aggregate 3: Pulling blade, Aggregate 4: Babble ... more information

Description: Bench size: 1190 x 370 mm Maximum edging height: 220 mm Total dimensions approx. (length x width x height) 1400x1100x1300Approx. Onsite Dimension. (l x w x h): 1,400 x 1,100 x 1,300 mm, weight approx.: 200 kg ... more information

Description: Number of rollers: 2, roller length 1330 mm, roller diameter approx. 200 mm, voltage 380 volts, without additional accessories, without CE certificateApprox. Onsite Dimension. (l x w x h): 1,900 x 900 x 1,500 mm, weight approx.: 300 kg ... more information

Description: - Edge banding machine - Serial number 37082 - Total installed power 32 KW - Edge thickness in strips up to 20 mm - Edge thickness in the roll from 0.30 mm to 3 mm - Workpiece thickness from 10 mm up to 60 mm - Adjustable feed speed from 10 m/min up to 24 m/min - Feed motor 5.50 KW - Motorized height adjustment - CNI control - Joint cutting unit, 2 x motor - Edge feeder for strips and roll, edge magazine for one edge roll - NORDSON MC 12 gluing unit for PUR adhesive - Pressure unit with (1+6) rollers - Snipping unit, 2 x motor - Rough trimming unit, 2 x motor (upper motor missing) - Fine trimming unit, 2 x motor 0.65 KW-12000 rpm - Profile trimming unit, 2 x motor - Profile scraper unit - Trimming unit swivels from 0° to 90°, motor 3 KW-3000 rpm - Flat scraping unit - Edge buffing unit, 2 x motor - Hot air blower unitApprox. Onsite Dimension. (l x w x h): 10,700 x 1,250 x  ...

Description: - Edge banding machine - Serial number 02352 - Total installed power 21 KW - Edge thickness from 0.40 mm up to 12 mm - Workpiece thickness from 10 mm to 45 mm - Minimum workpiece length 150 mm - Feed motor 2.20 KW - Control system - IMA 08.376 joint trimming unit, 2 x motor 3 KW-12000 rpm - IMA 283.08 Gluing unit with pot for granulated hot melt adhesive - Pressure unit with (1+5) rollers - IMA 08.415 Cross-cut unit, 2 x motor 0.66 KW-11100 rpm, swivels up to 8° - IMA 08.0555 Rough trimming unit, 2 x motor 1.80 KW-12000 rpm (upper motor missing) - IMA 08.346 Profile trimming unit, 2 x motor 0.50 KW-18000 rpm - IMA 08.519 Profile scraper unit - Flat scraping unit - Milling unit, motor 2 KW-12000 rpm - IMA 08.612 Edge buffing unit, 2 x motor 0.25 KW-1320 rpm IMPORTANT: The return system shown in the photos is NOT included in the scope of deliveryApprox. Onsite Dimension. (l ...

Description: High-perfomance Edegbanding machine with PU-gluing and return conveying system. Worked only for approx. 1 year in single-shift workshop: infeed area with long infeed fence, 5-roller infeed unit and squared infeed table (500 x 500 mm) with controlled fence. Spraying unit for separating agent top/bottom. per-milling unit 2 x 4,5 kW ,incl. horizontal positioning controlled gluing unit with PUR-pre-melter BALTI Dual Pur. 2 times automatic glue-quantity dosing. 6-roll pressure zine, per-heating table pre-milling unit for premilling of edge projection on the top side snipping unit 2 x 600 W with automatic lateral scanning and pneumatic inclination 0 and 25° rough trimming unit 2 x 1,85 kW with HSK-25 retainer corner rounding unit KFA x30 - 0,5 kW mit HSK retainer multi profile scraping unit flat scraping unit buffing unit return conveying system Feddback 100 for max. workpie ...

Description: Rubber pads conveyor belt renewed approx. 2022 Annual maintenance by HOMAG incl. various new parts (see photos) Second glue pot (serviced annually) Single-sided machine for joint trimming of straight workpiece edges, gluing and finishing of various edge materials from the roll or as strips, up to 20 m edge thickness, with longitudinal and transverse throughfeed. Fixed stop side on the left. BRIEF DESCRIPTION OF THE BASIC EQUIPMENT: BASIC MACHINE WORKPIECE TRANSFER DEVICE - TOP PRESSURE CONTROL power control PC22 FREE SPACE Joining unit GLUING PART A20 BASIC for rolls up to 3 mm and strips up to 20 mm NOISE PROTECTION CAPPAGGREGATE FREE SPACE for further processing units BASIC MACHINE: Continuous machine stand for setting up the processing units Workpiece support with extendable roller rail approx. 800 m Glue roller drive for feed stop Glue container lift with feed stop G ...

Description: Workpiece and edge parameters Workpiece width min: For workpiece thickness 8-22 mm | 70 mm For workpiece thickness 23-40mm | 120 mm For workpiece thickness 41-60mm , 150 mm depending on the workpiece length Workpiece protrusion | 38 mm Workpiece thickness | 8 - 60 mm Max. edge height = workpiece height, + 6 mm Edge material roll / 0.4 - 3 mm Edge cross-section max. For PVC | 135 mm For veneer | 100 mm Max. roll diameter , 830 mm Edge material strip , 0.4 - 15 mm (or 12 mm) (When using the VKNR 4845 exchange trimming unit, the max. edge thickness is 12 mm!) Max. edge cross-section For strips ' 600 mm If no radius is specified, R=2 mm is retracted and delivered serial number: 0-261-20-5413, workpiece thickness: 8 - 60 mm, feed: 8 - 18 m/min, joint trimming unit: 2 x 2,2 kW, gluing unit: A12, snipping unit: 2 x 0,35 kW, rough trimming unit: 2 x 0,55 kW, profile trimming  ...

Description: The machine will not be available until around May 2024. Basic machine Continuous machine stand for setting up the processing unit Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive for feed stop Glue container lift for feed stop Workpiece-operated glue container clamping Adjustable infeed guide Pneumatically controlled infeed stop Workpiece transport device Transport chain 80 mm wide Precision running and guide surfaces hardened Transport chain magnetically braked Top pressure driven by composite V-belt Manual height adjustment Digital position indicator Technical data Operating voltage: 400 Volt, 50/60 Hz Feed rate: 18 - 25 m/min Feed rate with FK11 profile cutter: max. 20 m/min Working height: 950 mm Working width for workpiece thickness 22 mm: min. 60 mm Working width for workpiece thickness 40 mm: min. 105 mm Workpiece protrusion: 30 ...