subcategories
(3rd category level)
Manufacturer:
(Category: 207)
Description: Bench size: 1190 x 370 mm Maximum edging height: 220 mm Total dimensions approx. (length x width x height) 1400x1100x1300Approx. Onsite Dimension. (l x w x h): 1,400 x 1,100 x 1,300 mm, weight approx.: 200 kg ... more information
Description: Number of rollers: 2, roller length 1330 mm, roller diameter approx. 200 mm, voltage 380 volts, without additional accessories, without CE certificateApprox. Onsite Dimension. (l x w x h): 1,900 x 900 x 1,500 mm, weight approx.: 300 kg ... more information
Description: - Edge banding machine - Serial number 37082 - Total installed power 32 KW - Edge thickness in strips up to 20 mm - Edge thickness in the roll from 0.30 mm to 3 mm - Workpiece thickness from 10 mm up to 60 mm - Adjustable feed speed from 10 m/min up to 24 m/min - Feed motor 5.50 KW - Motorized height adjustment - CNI control - Joint cutting unit, 2 x motor - Edge feeder for strips and roll, edge magazine for one edge roll - NORDSON MC 12 gluing unit for PUR adhesive - Pressure unit with (1+6) rollers - Snipping unit, 2 x motor - Rough trimming unit, 2 x motor (upper motor missing) - Fine trimming unit, 2 x motor 0.65 KW-12000 rpm - Profile trimming unit, 2 x motor - Profile scraper unit - Trimming unit swivels from 0° to 90°, motor 3 KW-3000 rpm - Flat scraping unit - Edge buffing unit, 2 x motor - Hot air blower unitApprox. Onsite Dimension. (l x w x h): 10,700 x 1,250 x ...
Description: - Edge banding machine - Serial number 02352 - Total installed power 21 KW - Edge thickness from 0.40 mm up to 12 mm - Workpiece thickness from 10 mm to 45 mm - Minimum workpiece length 150 mm - Feed motor 2.20 KW - Control system - IMA 08.376 joint trimming unit, 2 x motor 3 KW-12000 rpm - IMA 283.08 Gluing unit with pot for granulated hot melt adhesive - Pressure unit with (1+5) rollers - IMA 08.415 Cross-cut unit, 2 x motor 0.66 KW-11100 rpm, swivels up to 8° - IMA 08.0555 Rough trimming unit, 2 x motor 1.80 KW-12000 rpm (upper motor missing) - IMA 08.346 Profile trimming unit, 2 x motor 0.50 KW-18000 rpm - IMA 08.519 Profile scraper unit - Flat scraping unit - Milling unit, motor 2 KW-12000 rpm - IMA 08.612 Edge buffing unit, 2 x motor 0.25 KW-1320 rpm IMPORTANT: The return system shown in the photos is NOT included in the scope of deliveryApprox. Onsite Dimension. (l ...
Description: High-perfomance Edegbanding machine with PU-gluing and return conveying system. Worked only for approx. 1 year in single-shift workshop: infeed area with long infeed fence, 5-roller infeed unit and squared infeed table (500 x 500 mm) with controlled fence. Spraying unit for separating agent top/bottom. per-milling unit 2 x 4,5 kW ,incl. horizontal positioning controlled gluing unit with PUR-pre-melter BALTI Dual Pur. 2 times automatic glue-quantity dosing. 6-roll pressure zine, per-heating table pre-milling unit for premilling of edge projection on the top side snipping unit 2 x 600 W with automatic lateral scanning and pneumatic inclination 0 and 25° rough trimming unit 2 x 1,85 kW with HSK-25 retainer corner rounding unit KFA x30 - 0,5 kW mit HSK retainer multi profile scraping unit flat scraping unit buffing unit return conveying system Feddback 100 for max. workpie ...
Description: âą Edgebander, edge banding machine âą Edge thickness from 0.40 mm up to 25 mm âą Worpiece thickness from 6 mm up to 60 mm âą Minimum workpiece lenght 140 mm âą Minimum workpiece width 60 mm âą Adjustable feed speed from 8 m/min up to 20 m/min âą Feed motor 4.40 KW âą HOLZ-HER 1961 joint trimming unit, 2 x motor 2 KW-12000 rpm âą Edge feeder for 1 edge coil, edge magazine for 1 edge coil âą HOLZ-HER 1907 cartridge glue system with pot for granulated hot melt adhesive âą HOLZ-HER 1926 K pressure group with (1+2) rollers âą HOLZ-HER 1819 snipping unit, 2 x motor 0.45 KW-12000 rpm âą HOLZ-HER 1962 rough trimming unit, 2 x motor 2 KW-12000 rpm âą HOLZ-HER 1934 lower profile trimming unit, 2 x motor 0.45 KW-12000 âą HOLZ-HER 1933 upper profile trimming unit, 2 x motor 0.45 KW-12000 âą HOLZ-HER 1927 profile scraping unit âą HOLZ-HER 1964 flat scraping unit âą HOL ...
Description: âą Edgebander âą Edge thickness from 0.40 mm up to 25 mm âą Worpiece thickness from 6 mm up to 60 mm âą Adjustable feed speed: 8 m/min - 20 m/min âą Control âą Joint trimming unit, 2 x motor 2 KW-12000 rpm âą Edge feeder for strips and roll, edge magazine for one edge coil âą HOLZ-HER 1906 cartridge glue system âą Pressure group with (1+2) rollers âą End trimming unit with 2 motors âą HOLZ-HER 1823 fine trimming unit, 2 x motor 0.60 KW-12000 rpm âą Profile scraping unit âą HOLZ-HER 1983 profile trimming unit âą Edge buffing unit âą Milling group, motor 3.80 KW-12000 rpm âą Sanding belt unitApprox. Onsite Dimension. (l x w x h): 7,550 x 1,150 x 1,900 mm, weight approx.: 4,000 kg
Description: âą Edgebander with return system âą Serial number 10347 âą Edge thickness in strips up to 12 mm âą Edge thickness in roll up to 3 mm âą Worpiece thickness up to 40 mm âą Adjustable feed speed from 5 m/min up to 25 m/min âą Feed motor 5.50 KW âą Joint trimming unit, 2 x motor 3 KW âą Edge feeder for strips and roll, edge magazine for 6 edge coils âą Gluing unit for PUR glue âą Pressure group with (1+5) rollers âą End trimming unit, 2 x motor âą Rough trimming unit, 2 x motor 1 KW âą Profile trimming unit, 4 x motor âą Profile scraping unit âą Flat scraping unit âą Edge buffing unit âą Milling group âą Return system with inclined air table and dimensions 2020 x 1000 mm, motorized belt conveyor with useful dimensions 9000 x 1200 mm, inclined roller conveyor with dimensions 2500 x 1200 mmApprox. Onsite Dimension. (l x w x h): 12,275 x 3,800 x 2,570 mm, weight ...
Description: âą Edgebander âą Serial number 14589/9-810 âą Total installed power approx. 9 KW âą Edge thickness from 0.40 mm up to 8 mm âą Worpiece thickness from 6 mm up to 45 mm âą Minimum workpiece lenght 180 mm âą Minimum workpiece width 60 mm âą Feed speed 11 m/min âą Feed motor 0.75 KW âą Control âą HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil âą HOLZ-HER 1906 cartridge glue system âą HOLZ-HER 1913 pressure group with (1+2) rollers âą HOLZ-HER 1976K end trimming unit, 2 x motor 0.22 KW-9000 rpm âą HOLZ-HER 1942M fine trimming unit, 2 x motor 0.60 KW-9000 rpmApprox. Onsite Dimension. (l x w x h): 4,000 x 1,450 x 1,250 mm, weight approx.: 1,000 kg
Description: ⹠Edgebander ⹠Serial number 147/9-909 (1999) ⹠Edge thickness in strips up to 13 mm ⹠Edge thickness in roll from 0.30 mm up to 5 mm ⹠Worpiece thickness from 6 mm up to 45 mm ⹠Minimum workpiece lenght 180 mm ⹠Minimum workpiece width 60 mm ⹠Feed speed 11 m/min ⹠Feed motor 1.50 KW ⹠PLC control system ⹠HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil ⹠HOLZ-HER 1906 cartridge glue system ⹠HOLZ-HER 1913 pressure group with (1+2) rollers ⹠HOLZ-HER 1918 end trimming unit, 2 x motor 0.35 KW-9000 rpm, tilting up to 10° ⹠HOLZ-HER 1942 M fine trimming unit, 2 x motor 0.60 KW-9000 rpm, tilting up to 15° ⹠HOLZ-HER 1929 profile scraping unit ⹠HOLZ-HER 1940 edge buffing unit, 2 x motor 0.12 KW-1640 rpmApprox. Onsite Dimension. (l x w x h): 4,200 x 1,200 x 1,750 mm, weight approx.: 2,000 kg
Description: âą Edgebander âą Serial number 2697 âą Edge thickness in roll from 0.40 mm up to 3 mm âą Worpiece thickness from 8 mm up to 40 mm âą Feed motor 0.37 KW âą Edge feeder, edge magazine for one edge coil âą Gluing unit with pot for granulated hot melt adhesive âą Pressure group with (1+2) rollers âą End trimming unit âą Fine trimming unit, 2 x motor 0.36 KW-12000 rpm, tiltingApprox. Onsite Dimension. (l x w x h): 2,800 x 980 x 1,450 mm, weight approx.: 700 kg
Description: serial number: 36789 Technical specifications: total installed power 33 kW, 63A, 50Hz panel length - min 150 mm - max 3200 mm panel width - min 120 mm - max 3200 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.30 mm to 3 mm workpiece thickness from 10 mm up to 60 mm edgebanding strip height - min 15 mm - max 65 mm working line height 950 mm panel projection from drive belt 50mm adjustable feed speed from 10 m/min up to 24 m/min motorized height adjustment CNI control, display replaced with a flat screen anti adhesive spraying device joint cutting unit, 2 x motor 5kW, 12.000 rot/min edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated 2 gluing units: 1 unit that apply the glue on the panel edge and 1 unit wich apply glue on the edge, for softforming applications. These units must change depending on the des ...
Description: Joiningagreat 2 x 2kW /gluing cartridge system/capping/milling station radius chamfering 0-15°/radius drawing/ separating/ detergent spraying unit copy milling unit/ surface scraper/ fettling station edge thickness max.: approx. 0,4 - 8 mm [mm] workpiece height 6 - 50 [mm] feed speed approx.: 8 [m/min] / elect. connection: 400 V, 3Ph, 50 Hz PRICING IN FUNCTIONALLY TESTED CONDITION - SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure / documents and may differ from actual values. ATTENTION: it is expressly pointed out that this lot corresponds only to the scope of the lot description. If there are any objects on the photo that are not explicitly mentioned in the lot description, they are not part of the sale. Of course, this also applies to tools, additional equipment, accessories, software, operating equipment, etc. (in relation to the photo and lot d ...
Description: Manufacturer: Grecon Dimter Finger Jointing line Machine type: Combipact 4 Serial number: 193.V000307, year 2005 Timber data: Type of timber: softwood or hardwood Length (min/max): 150/1000mm Width (min/max): 30/205mm Height (min/max): 16/80 mm Ratio length / max width: 2:1 Resulting length (min/max): 3.000/6.100 mm Dimensions: 21.000 x 8.000 x H2.000 mm Space required for operation and maintenance: 22.000 x 9.000 x H2.000 mm Supply of power: 400V, 50Hz, 91 kW, 160A Control voltage 24V DC Weight: 15.000 kg The line consists of: 1. Charging unit with compartment conveyor, type BF6/600/1500 2. Infeed station, type ESTA 600/1500 3. Shaping machine Combipact, type FDL-F-205/600/1000 4. Infeed station thread in stationâ for press, type EKK 240/4000 Re 5. Transfer station, typeUKB 600/1000 6. Front side press, type CONTI 6100 Ll Attention! The line may be dismantled after 1 ...
Description: serial number: 201011RX000004 machine type: monolateral, left side total installed power 21,8 KW, 59A, 50Hz panel length - min 120 mm panel width - min 60 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.4 mm to 3 mm edge thickness for strip: 3-16mm min length for strips: 180mm minimum distance between 2 panels: 800mm edge banding strip height - min 12 mm - max 63 mm adjustable feed speed from 10 m/min up to 20 m/min motorized height adjustment CN control, anti adhesive spraying device edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated pressure unit for straight edges snipping unit, 2 x motor 0,5kw, 12.000 rpm rough trimming unit, 2 x motor 1,1 kw, 12.000 rpm fine trimming unit, 2 x motor 0.37 KW-12.000 rpm corner rounding unit, 2 x motor, 12.000 rot/min profile scraper unit  , serial number: 201011RX0 ...
Approx. Onsite Dimension. (l x w x h): 3,100 x 900 x 1,650 mm, weight approx.: 1,000 kg ... more information
Description: Serial Number: KK00018498 Type: B04 Max. working width: 2 mm max. board thickness 50 mm , Minimum board dimensions: 180x65 mm , Feed speed 6 m/min Machine with gluing unit Saw for cross-cutting Profiling unit Machine equipped with PLC Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 1,500 mm, weight approx.: 300 kg
Single-sided automatic edge banding machine with joining unit, hot melt adhesive specification for straight workpieces (EVA-PUR glue basin with outlet function optional), HF cross-cut saw station, HF milling unit, chain feed, double roller top pressure, extendable workpiece support rail and signal lamp for workpiece sequence. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 â 3.0 mm and from 8 â 50 mm workpiece height.
Description: COMPOSITION: Anti-adhesive group Grinding group Infrared lamp Glue tank group Pneumatic shear, pressure rollers, edge feeding system Trimming group Edge trimming group Edge scraping group Brush group TECHNICAL DATA Panel height 8 - 45 mm Edge thickness 0.4 - 3 mm (coil) / 0.4 - 5 mm (strips) Minimum panel width 95 mm Minimum panel length (edge side) 210 mm Panel feeding ,speed 7 m/min Infeed grinding motors (each) 200 Hz - 12,000 rpm - 0.75 kW Glue tank resistors 1490 W - 6 cartridges Trimming blade rotation speed 9,000 rpm Trimming motor 50 Hz - 0.18 kW Trimming motors (each) 200 Hz - 12,000 rpm - 0.22 kW Milling tools ,with WIDIA combined knives (radius/chamfer) Ă 75 mm Z4 - shaft ,Ă 16 mm (r=2 - 3 mm) Total installed power approx. 5 kW Approx. Onsite Dimension. (l x w x h): 2,450 x 800 x 1,450 mm, weight approx.: 450 kg
Description: BRANDT KDF 660 Profiline with joint cutter and corner rounder PU glue (and hot melt glue) Workpiece preheating: IR preheating Edge material: 0.4 - 15.0 mm Max. width of edgebanding: max. 66 mm (at 1 mm band thickness) Edging material on the roll: Max. 6 mm to 45 mm, max.0.8 to 65 mm Workpiece thickness: Max. 8-60 mm Control: PC20+ Streckensteuerung with modem for teleservice 1. Joint milling 2. Chopping knife 3a. Pre-activation with IR heating 3b. Anti adhesive spray device 3c. Pre-melter, for quick change of adhesive 3d. Glue aggregate with glue application roller in follow-on or counterflow 3e. Program-controlled pressure zone 4. Capsaws - adjustable 0° - 15° 5a. Coarse milling (BĂŒndig milling) -radial Milling units with 2-point adjustment, flat, phase radius up to 12 mm edge thickness 5b. Fine milling, with program-controlled adjustment for thickness, plane, phase or r ...