gluespreader machines used for sale

Description: BIMATIC edgebander model SYNCRO 4105.8 : - control panel with electronic control - panel thickness from 8 to 45 mm - feed speed 10 mt/min - overall dimensions approx. 5.1 x 1.2 x h=1.6 m - Operating groups: - gluing unit with: hot-melt glue tank with rapid heating (approx. 5/6 min.) loader and cutter for roll material from 0.4 to 3 mm loader for solid strips up to 8 mm - double vertical end trimmers, hp motors 0.3+0.3, tiltable 0 - 15° - overlapping trimmers, non-tilting, hp motors 0.5+0.5 - trimmers inclinable 0 - 25°, hp motors 0,5+0,5 - edger with 1 hp motor 0,5 - straight edge sander, hp motor 2Approx. Onsite Dimension. (l x w x h): 5,100 x 1,200 x 1,600 mm, weight approx.: 1,360 kg

Manufacturer: Istel, Type: Eckschrankpresse, Bauyeshr : 1998, Hydraulical/pneumatical: motorisch/pneumatisch, Press hight mm: 1050/900/800, Press depth mm: 1050/900/800, Machine rigging: automatisch, Compressed air bar: 6, Gewicht ca. kg : 2000, Year :1998 ... more information

Manufacturer: Limatech, Type: MPS 20, Year: 1998, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 1300, Feeding speed max m/min: ca. 30, Feeding speed continous adjustable: yes, Machine rigging: automatisch, Compressed air bar: 6, Wight approx. kg: 3000, Year :1998

BIMATIC edge banding machine model SYNCRO 4105.8 : - Electronically controlled control panel - Usable panel thickness from 8 to 45 mm - Forward speed 10 m/min - Overall dimensions approx. 5.1 x 1.2 x h=1.6 m - machine according to CE standards, year 1998 Operating units: - Gluing unit with: hot-melt glue pot with rapid heating (about 5/6 min.) loader and shear for roll material from 0.4 to 3 mm loader for solid strips up to 8 mm - Double vertical trim panels, 0.3+0.3 hp motors, tiltable 0 - 15° - Overlapping trimmers, non-tilting, 0.5+0.5 HP motors - 0 - 25° tilting trimmers, 0.5+0.5 hp motors - Rounder with 1 engine HP 0.5 - Straight edge sander, HP 2 motor

SPECIFICATIONS: Workpiece thickness max mm: 60 Edge material thickness mm: min 0.5 - max 3.0 Minimum radius border min mm: 20 Solid wood max mm: 8 Cutting scissors CW: 2.5  ... more information

single-sided edge banding machine with pull-out workpiece support, end trimming unit and combi-unit. Power consumption: 400 V / 50 Hz / 3 pH / 7 kW Compressed air supply: 6 bar Dimensions: approx. 4,000 x 1.300 (1,780) x 1520 mm Edition extendable to 800 mm Working height: 820 mm Roller plate ø 700 mm

Edge banding machine OTT Type: ATLANTIC V 6 B.J.: 1998 Glue unit / also polyurethane adhesive can be Cut from the edge Green cut front and rear Simple milling Profile milling Profile cyclin Simple cyclin Speed 12 m / min Overall dimensions: 0.400 cm, 95 cm wide, 130 cm high; Weight: 1,400 kg

Description: • Edgebander • Serial number 14589/9-810 • Total installed power approx. 9 KW • Edge thickness from 0.40 mm up to 8 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 0.75 KW • Control • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1976K end trimming unit, 2 x motor 0.22 KW-9000 rpm • HOLZ-HER 1942M fine trimming unit, 2 x motor 0.60 KW-9000 rpmApprox. Onsite Dimension. (l x w x h): 4,000 x 1,450 x 1,250 mm, weight approx.: 1,000 kg

Manufacturer: Simmpianti, Year: 1998, Longitudinal through running press: yes, Stages: 1, Work piece width min-max mm: 2700 mm X 3200 mm, Min.-max. workpiece height in mm: 3-80, Press length mm: 3200, Pressing width mm: 2700, Press power kg /cm²: 4-6, Warmwasser beheizt: yes, Feeding: yes, Automatical glue supply: yes, Veneer applicaition table: yes, Through running machine: yes, Destacking: yes, Year :1998

Manufacturer: Schäfer Folienkaschiermaschiermaschine, Type: SIK 1250/R,, Year: 1999, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: endlos, Min.-max. workpiece height in mm: 3-40, Working widht max mm: 1300, Working width min min mm: 100, Working widht mm: 1300, Working hight mm: 880, Feeding speed min-max m/min: 3-20, Roller diameter mm: 120, Lamination calender: yes, Diameter of lamination calender in mm: 120, Roller diameter mm: 120, at top and bottom: gummiert, pre-coated foil: yes, Main engine kW: 0,37 , FREE TEXT: inkl. Einlaurollgang und Auslaufrollgang 2 mal 3000 mm, Year :1999

Manufacturer: Costa, Type: Strettoio, Year: 1999, Work piece width min-max mm: 180, Min.-max. workpiece length in mm: 2200, Stages: 5, Year :1999 ... more information

Equipment and technical data: Edge banding machine for pre-coated edge material High-performance heat gun Roll capping electromagnetic Edge milling machine Sytem Hebrock End capping: Cross-cut module for flush cutting the front Edge protrusion Feed: 3-roller system Boom on both sides Add-on trolley, mobile max. edge thickness approx. 1 mm max. workpiece height approx. 50 mm min. workpiece length approx. 170 mm min. workpiece width approx. 50 mm Feed rate approx. 4 m/min. Ready for use: approx. 1 minute Dimensions 1730 x 690 x1240 mm Weight approx. 115 kg Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well  ...

Description: • Edgebander • Serial number 147/9-909 (1999) • Edge thickness in strips up to 13 mm • Edge thickness in roll from 0.30 mm up to 5 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 1.50 KW • PLC control system • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1918 end trimming unit, 2 x motor 0.35 KW-9000 rpm, tilting up to 10° • HOLZ-HER 1942 M fine trimming unit, 2 x motor 0.60 KW-9000 rpm, tilting up to 15° • HOLZ-HER 1929 profile scraping unit • HOLZ-HER 1940 edge buffing unit, 2 x motor 0.12 KW-1640 rpmApprox. Onsite Dimension. (l x w x h): 4,200 x 1,200 x 1,750 mm, weight approx.: 2,000 kg

Manufacturer: Sergiani, Type: LAS 230, Year: 1999, Stages: 10, Heizplattenmasse ca.mm: 2500x1300, Anzahl der Etagen: 10, Heated by: Warmwasser, Press length mm: 2500, Pressing width mm: 1300, Press power kg /cm²: 7,69, Electrically heated kW: 21, Work piece thickness max mm: 80, Year :1999 ... more information

AUTOMATIC EDGE BANDING machine type HOLZ-HER SPRINT 1411 work hours : 380 work meters : 32.000 CE mark : YES volt. 380/50 composition : 1. gluing unit with cartridge and comb nozzle 2. end trimming unit 3. edge trimming unit 4. tilting edge trimming unit 5. glue scraper  ... more information

SPECIFICATIONS: Execution: - Gluing machine - Cross-cut saw unit - Flush milling - Scraper unit - Brushing unit  ... more information

Description: • Edgebander • Serial number 2697 • Edge thickness in roll from 0.40 mm up to 3 mm • Worpiece thickness from 8 mm up to 40 mm • Feed motor 0.37 KW • Edge feeder, edge magazine for one edge coil • Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+2) rollers • End trimming unit • Fine trimming unit, 2 x motor 0.36 KW-12000 rpm, tiltingApprox. Onsite Dimension. (l x w x h): 2,800 x 980 x 1,450 mm, weight approx.: 700 kg

Description: Cross-cut saw unit : 1 motor / Flush trimming / Raidus trimming / Flat scraper blade Buffing unit Glue thickness max : 8 mm Thickness of roll material max : 3 mm Units synchronised : pneumatic Gluing height max : 50 mm Workpiece length min : 300 mm - Workpiece width min : 90 mm Feed rate max : 10 m/min Strip magazine : Yes Total connection : 12.6 kW ' Some of the technical data is taken from the manufacturer's brochure. Actual values may differ' Machine length : 4,300 mm Milling motors have slight bearing noises - tools must be changed - slight leakage at the DL cylinders. PRICED IN FUNCTIONALLY TESTED CONDITION , SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. , If the photo shows obje ...

Manufacturer: Hess , Type: Centro, Year: 2000, Hydraulical/pneumatical: yes, High / low pressure: yes, Press length mm: 3050, Press height in mm: 2200, Press depth mm: 100, Cylinder vertical: 2, Cylinder horizontally: 2, Vertikaldruckzylinder: 2, Haltezylinder zum Fixieren der Hölzer: yes, Mitteldruckbalken: no, Querdruckeinrichtung: yes, Funk-Handpanel: Handpanell, Elektronische Einzeldruckregelung (zum Verpressen von Kreuzsprossenfenster): yes, Year :2000

Manufacturer: Italpresse, Year: 2000, Type: Lock Form SS AIR , Control: 1330, Number of tables: 2680, Automatisches Rüsten: 55, Work piece width min-max mm: elektrisch, Min.-max. workpiece height in mm: 150, Press length mm: 2, Membrane: 1450 x 2800, Foil magazin spaces: no, Foil types: yes, Brushing machine: yes, Year :2000