- A. MEIER (1)
- ABAKUS (1)
- ABAWERK (1)
- ABSOLUTE (1)
- ABUS (1)
- AC-MOTOREN (1)
- Adixen (2)
- ADL (1)
- AERO-LIFT (1)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIRFLEX (1)
- AIRMEX (1)
- AIRPEL (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTRONIC (1)
- AMADA (3)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- ANGELANTONI (1)
- ANYCUBIC (1)
- APV (1)
- ARI (1)
- ARP (1)
- ARZUFFI (1)
- ASSFALG (1)
- AT (2)
- ATEC (1)
- ATLAS COPCO (1)
- AVK (1)
- AVOCENT (1)
- BAC (1)
- BACHER (1)
- BAKA (2)
- BANK (1)
- BARTH (4)
- BAUER (4)
- BAUTERMIC (1)
- BAYERN TOOLS (5)
- BBC (1)
- BEER-FÖRDERTECHNIK (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BESSEY (2)
- BETTER PACKAGES (1)
- BIG (7)
- BIO RAD (1)
- Bito (2)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BONNET (1)
- BORG WARNER (1)
- BOSCH (6)
- BOSCH REXROTH (1)
- BOSCHE (1)
- BOSCHERT (2)
- BOSTITCH (1)
- BRAZILIAN SHIPYARDS (1)
- BRINKMANN PUMPS (4)
- BRONSWERK (1)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BRÃœHL (1)
- BUDERUS (1)
- BUSCH (1)
- BWB (1)
- BWF (2)
- BÃœHLER WÃœRZ (1)
- CA-02 (1)
- CALAMIT (1)
- CAME (1)
- Capstone (2)
- CARL STAHL (1)
- CASE TECH (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CODEMA SYSTEMS (1)
- COLD JET (1)
- COMAC (1)
- CONCEPT LASER (1)
- CONTEC (1)
- COYNCO (5)
- CTS (1)
- Custom made (2)
- DAEWOO (4)
- DAF (1)
- DANFOSS (1)
- DANOBAT (1)
- DANTHERM (1)
- DATACOLOR (1)
- DBK DAVID+BAADER (1)
- DEHOUST (1)
- DELEKS (1)
- ... more
Manufacturer:
(Category: 2500)
New in: 2008
used
Description: The foaming machine described below is designed for foaming sandwich elements. PRODUCT Panels for cold rooms DIMENSIONS Length x width max. 2,400 x 1,350 mm min. 600 x 180 mm Thickness: 40 ... 120 mm CAPACITY Press type: 2 + 2 Press table dimensions: 6,500 x 1,600 mm Number of press tables: 4 pieces , Occupancy of press table: 1 piece Extension of pressing tables: 60 sec Curing time / dwell time in the press: 15 - 45 min Occupancy rate: 0.9 Shifts: 2 pieces , Working time per shift: 8 h Panels per shift: 48/72 pieces Depending on foam thickness and raw material GROUND DATA (this set-up) Mixing ratio: 100 : 140 (polyol : isocyanate) Dosage - max: 1100 g/s per mixing head Specific gravity: Polyol 1.0 Isocyanate 1,2 Density: 45 - 60 kg/mÑ Start time: 20 sec (Other raw material data can of course be used for other applications) SYSTEM COMPONENTS Components of the ...
New in: 2008
used
180 € Description: including base frameApprox. Onsite Dimension. (l x w x h): 850 x 330 x 1,070 mm, weight approx.: 150 kg ... more information
New in: 2008
used
180 € Description: Full load capacity 10 t, working pressure 52 mPaApprox. Onsite Dimension. (l x w x h): 320 x 250 x 330 mm, weight approx.: 32 kg ... more information
New in: 2008
used
140 € Description: Serial number 070830135, fuse 16 AApprox. Onsite Dimension. (l x w x h): 760 x 630 x 1,450 mm, weight approx.: 50 kg ... more information
New in: 2008
used
50 € Description: Article number: 0701 138 X Rated power: 1200 WApprox. Onsite Dimension. (l x w x h): 800 x 500 x 1,300 mm, weight approx.: 20 kg ... more information
New in: 2008
used
950 € Description: Lifting beam Serial number 57.676.2 Maximum load capacity: 8.000 Kg 7 positions per side Distance between positions: 160 mm Manual positioning Shackles and chains includedApprox. Onsite Dimension. (l x w x h): 2,900 x 450 x 800 mm, weight approx.: 300 kg ... more information
New in: 2008
used
950 € Description: Lifting beam Serial number 57.677.2 Maximum load capacity: 10.000 Kg 7 positions per side Distance between positions: 160 mm Manual positioning Shackles and chains includedApprox. Onsite Dimension. (l x w x h): 2,900 x 500 x 800 mm, weight approx.: 300 kg ... more information
New in: 2008
used
950 € Description: Lifting beam Serial number 57.677.1 Maximum load capacity: 10.000 Kg 7 positions per side Distance between positions: 160 mm Manual positioning Shackles and chains includedApprox. Onsite Dimension. (l x w x h): 2,900 x 500 x 800 mm, weight approx.: 300 kg ... more information
New in: 2008
used
950 € Description: Lifting beam Serial number 57.677.3 Maximum load capacity: 10.000 Kg 7 positions per side Distance between positions: 160 mm Manual positioning Shackles and chains includedApprox. Onsite Dimension. (l x w x h): 2,900 x 500 x 800 mm, weight approx.: 300 kg ... more information
New in: 2008
used
140 € Description: Collecting volume 1110 litres, load capacity 1300 kg, serial number 1478/09, with digital flow meterApprox. Onsite Dimension. (l x w x h): 1,750 x 1,160 x 1,420 mm, weight approx.: 200 kg ... more information
New in: 2008
used
Description: Manual monorail system , Pneumatic switch points 2x jib crane with lifting capacity 250 kg incl. GIS electric chain hoist 4x travelling crane with lifting capacity 250 kg incl. GIS electric chain hoist 4x drop section Floor area: approx. 65 x 30 metres Structure height: approx. 4.5 metres Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
New in: 2008
used
65 € Description: Load capacity 5000 kgApprox. Onsite Dimension. (l x w x h): 2,100 x 1,100 x 1,920 mm, weight approx.: 200 kg ... more information
New in: 2008
used
Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg
New in: 2009
used
Atec stainless alginator serial: C10030 - 02 2009, 70Kg, digital timers and temperatures, high shear mixer, electrically heated, on stainless mobile skid ... more information
New in: 2009
used
Qty. 1 Second-hand laser tube wall thickness measurement unit Mfc.: MSG Maschinenbau GmbH Built: 2009 Determination of wall thickness using laser technology. Max. loupe dia.: 85 mm (can be modified) Wall thickness: 11 – 14 mm Loupe length: 250 – 600 mm Operation speed: 1.3 m/sec. Power: 6.5 kW, 400 V, 21 Amps., 50 Hz Air pressure: 6.0 bar Scope of supply: Removal device Feeder Saw inlet channel Vertical drivers Vertical & horizontal straightener Heavy-duty metal circular saw Blow-out and suction device Weighing device (calculation) Catchments Loupe crane Suction unit Hydraulic aggregat Collection stand
New in: 2009
used
This Rapid G500-60KU, manufactured in 2009, features a grinding chamber opening of 450x600 mm, and is equipped with a rotor speed of 430 1/min. It includes a robust 37 kW drive motor and comprehensive starting equipment with a Star-delta circuit. Ideal for intensive grinding tasks in plastics processing, the Rapid G500-60KU machine we have for sale ensures efficient material handling. Reach out for more information about this machine.
New in: 2009
new
Available in stock 1 x NEVER USED Air Liquide Pressure Regulator DCn 300/3 Suitable for all industrial gases, including oxygen, acetylene and propane. Non corrosive and toxic gases excepted. The equipment was never used and is still inside the original packing. Maximum Flow Rate: 350 Nm3/h (N2) Maximum Inlet Pressure: 50 bar Adjusting Outlet Pressure: 1 to 18 bar
New in: 2009
used
This ERMAKSAN RPP 12730 Punching machine was manufactured in the year 2009 in Turkey. It has 2 axis. The machine has a punching force of 300 kN. ... more information
New in: 2009
used
350 € Description: Battery powered manual sweeper. Working capacity up to m²/hour: 2600 Working width with central brush (cm): 50 Working width with side brush (cm): 65 Electric motor (V/W): 12/600 Motor (HP): 0 Type of unloading: manual Collection container capacity (l): 40 Approx. Onsite Dimension. (l x w x h): 1,200 x 700 x 1,200 mm, weight approx.: 29 kg
New in: 2009
used
used, good condition from plant disassembly 1x ELTRA DSG10.0 three-phase transformer - Year of construction: 09/10 Power: 10 kVA at 100% ED Prime: 3x 200 V - 210 V - 240 V / 3x 29.5A Sec.: 3x 400 V / 3x 14,4 A 50/60 Hz Isol.Kl.: ta40°C/B Circuit: Dyn5 Cooling: AN Space requirement LxWxH: 670 x 490 x 660 mm (mobile with rollers) Price is plus VAT free loading Warehouse Gießen - shipping possible by arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sales reserved The machine is electrically and mechanically tested before sale and receives a DIN VDE 0113 test report, which is part of our service.