filling machines used for sale

1) Powder Mixing Plant Consisting Of: -n°2 Powder Dispensers+clochee For Dust Extraction; -n°1 Horizontal Mixer For Dosing Powders, Complete With Extraction Vents And Dust Filters; -n°2 Horizontal Mixer Accumulation Dust Materials Mixed, Complete With Extraction Vents And Dust Filters; - Support frame plus ladder. -almost new, used for a few hours. 2) Bl Packaging Machine For Plastic Bags 5/30 Kg: - Packaging Machine With Horizontal And Vertical Sealing Bars; - Complete With Electrical Panel And Support Frame. 3) Vertical Bucket Elevator: - Bevini brand; -mod. et4; - Measures 1.15m x 0.55m; - Height 6.70 m; - Almost new, used for a few hours.

LINE DATA CONTAINER: Bottle MATERIAL: Pet SHAPE: Cylindrical, Square and Orthogonal CAP: EUME 29.21 by Embalatap, bicolor Plastic material MAXIMUM PRODUCTION 36,000 BOT / HOUR PRINCIPAL FUNCTIONS  control of the minimum filling level  control of maximum fill level  predisposition for the management of other controls in the same position or remote  rejection for “external cause” of the level control (calculation in a separate category)  routine for management of the ejection device BASE CHARACTERISTICS  display of the filling value of the last container  graphic display of the mean filling error and standard deviation referred to the batch of product  visualization of the results and production statistics (total containers produced, total containers accepted, total container ...

Manufacturer: Bertolaso Model: Olimpia 32 Year: 1985 Speed = 3500 bottles/h Equipment in Working Conditions Safety Systems: Yes Technical Documentation: Available ... more information

The single-head screwdriver is currently adapted for screwing 5L PET bottles. The device can be adapted to screw on other PET or HDPE packaging. The screwdriver is equipped with an automatic screw feeder. Device in very good condition. Capacity: 1600 - 2000 b / h Production year: 2014 Manufacturer: PUH NITRAS

Fill & Seal Ilpra 8000 2008 400V The machine is located in Spain. ... more information

Bottle filling machine Year 2012. The machine is located in Spain. ... more information

Siem RCS 9/1 S First Line filling and capping machine Filling and capping machine Filling machine 9 nozzle Machine is in very good condition ... more information

ALAFTRE edible oil bottling line 1 N. 1 bottling line for 1 liter bottles: Tribloc model < PUP 20/16/3>- Rinser (16 heads), Filler (20 heads), Capper (30 heads). Hourly production (x1000) max 4.500, bottle diameter min. 55 max. 100, bottle height min. 240mm max 340mm. Diameter tolerance -0+2 mm, height tolerance +2 mm. Automatic labeling machine MOD. RO extension. SYNADHA 540/S. N. 1 can filling monoblock system MOD. RVP 12/1 composed of filler (heads nr. 12) and capper hourly capacity LT 3 Nr. 1500, Lt. 5 nr. 1200.

DOSIMAQ filling line We currently have this equipment modified from 4 nozzles to 8 nozzles to increase production and stability in the dosage. Productive data: 250ml / 330ml / 500ml FORMATS · SPEED 2700-3000 units/h (you can press a little more) ... more information

Filling line for PET, HDPE bottles (Bulgaria) - volume of bottles 0.5; 1.0l, productivity 6000 bph. The line consists of Rinser mod. IND-Wash 55-32 RR for rinsing bottles with ozonized water, capacity 6000 bph. Grabbing by the throat. Filling monoblock model IND-DOSE 49 RWTC-20/6 capacity 6000 bph with built-in CIP internal washing (additional two-section bath for directing solutions and circulation along the internal circuit of the machine), external manual washing. Dosing type is weight. UV lamp for screw cap processing. Shrink wrapping machine with buncher and flow divider, model IND-Pack, blocks 2 3, 3 4. Film width 490mm. Thickness 80 microns. Transport system model IND Trans 71 (13m) Ozone station made of stainless steel Labeling machine for circular polypropylene labels model IND-GM 360 Dismantled in 2021. In working condition.

Pace Packaging Corporation Omni-line mobile bottle unscrambler, model: M400SSDCE, 230 V, 1 PH, 50 Hz, 7.4 F.L.A., infeed roller, roller width: 330 mm, total dimensions: 3200 mm x 1700 mm x 1850 mm. Omni-Line M400 running 16 oz HDPE dairy bottles at 200 bpm. The Omni-Line model M400 is shown here running 16-ounce dairy bottles at 200 bottles per minute. The unit shown is designed in a left-hand configuration. In the rotating disk, bottles are spun by centripetal force into neck-leading and base-leading positions for introduction to the infeed tooling.

MAIN FEATURES: In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a bulit-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. TECHNICAL PARAMETERS: • only 3 persons per shift are required to operate the whole production process • production capacity: 500 - 1250 liters / hour • product  ...

Smf Combi 400 Rinsing,Filling and Capping Machine Rinsing,Filling and Capping Machine Machine is in good working condition All maintenance has been done regularly Number of head : 20 Capacity : 8000 pieces per hour(0.5 liter) ... more information

Pneumatic dosing machine from the OSM brand Model: DCE TYPE ELECTRO 100 Year: 2015 ... more information

Dosimaq LF-600-L Vial / ampoules filler 8 dispensers Year of construction 2015 The dosage works through valves Has CE plate It has manual Speed with which 3,000 units/hour were worked at 500ml + 250 ml +330 ml. ... more information

Monoblock TECH-PACK NZ-2500 filling machine year 2010 Function: pouring juices into bottles Dimensions Length: 3.1 m Height: 2.2 m Width: 1.4 m Weight: 800 kg ... more information

Dispenser - pouring machine, semi-automatic, for liquid and semi-liquid products. Data: - capacity up to 300 cycles/h. with a capacity of 180 ml - number of dosing heads 2 - dosing range from 10 ml - dosing tolerance ±1.0% - diameter of packages up to 450 mm - height of packages up to 350 mm - power supply 1 x 240V 50Hz - installed power 0.70 kW. No photos of the connected filler, the device is dismantled in the warehouse, secured.

Liquid and Viscous Products Filling Line Model: 2021 Model Combo (filling, capping, labeling, collection tray) full filling line. Control: Touch PLC screen Electricity Supply: 3 Phase 380 Volt / 50 Hz Filling System: Hydraulic unit. Product feeding: The machine automatically fills its own reservoir. Products that can be filled: It fills liquid or all kinds of viscous products. Filling Capacity: 10 ml 250 ml. Capacity: 1200 – 1800 Pieces / Hour (Software supported for 500 ml filling if desired) Closing Module: It closes all the covers including the triggers. Packing feeding manual. Automatic filling, capping and labeling. Filling line structure: Chrome stainless quality

OMAG STICK PACKAGING MACHINE mod. DIVA/5 for sugar packing 2006 Specification PRODUCT: Sugar DOZE: 3-7 gr. DOZING SYSTEM: RECIPROCATING & OSCILLATING FILLER STICK SIZE: width – fixed 17 mm B37ksybvpz length - adjustable 60-135 mm for example, 17 x 110 mm OUTPUT: 50 – 60 bags/min 1 line equal to 250 - 300 bags/min on 5 lines

NEW packaging machine for preformed trays with aroma protection lid between 100-150 gr. The machine was never used and it was bought in 2015. It can fill 2 trays at a time with volumetric dispensers, performs the vacuum and the introduction of the inert gas, welds the upper seal film and puts the aroma-saving lid on. The machine is equipped with a loader for the trays and a loader for the lids. The productivity of the machine is about 20 trays per minute, equal to 1,200 trays per hour. The machine is completed by an automatic labeling unit, capable of affixing 2 labels, one on the bottom of the tray and one above the aroma-saving lid. The labeller is equipped with an ink jet marker for batch and expiration, and has a rotating accumulation plate for the labeled and marked trays. The machine was exclusively used for initial commissioning, but it never produced anything. The inert ...