subcategories
(3rd category level)
Manufacturer:
(Category: 703)
CAN SEAMER SOMME, MODEL: 444, ¼ CLUB FORMAT Technical description: With protective fairing Throughput rate: ± 80/90 Jars/min Power supply: 380-440V/50-60 Hz ... more information
RÜHLE FROZEN BLOCK CUTTER, TYPE GFR 450 Technical description: Guillotine for cutting frozen meat and other types of frozen blocks such as frozen fish blocks, frozen blocks of vegetables and fruits to minus 20 degrees Celsius. The Ruhle guillotine achieves a capacity of up to 3000 kg/h and has also been adapted for inclusion in the technological line. The device has been equipped with 4 vertical cutting knives, which allows fine shredded cut block. A separate container for felling and very accurate feeding of the trolley to the finished product minimizes the loss of raw material. Maximum cut dimensions of the block: 450×250 (mm)
PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-200 Technical features Output: up to 200 cans/minute Recommended output: 150 to 180 cans/minute (according the can type) Format: diameter 83,7 mm Cans height: 25-62 mm ... more information
124 needle (31x4) injector. 5,5 kW, 3x400 V, 50Hz ... more information
Spiral mixer from Spomazary 450 liters with 5,5KW V-belt. 1.25m high 0.90m wide 1.35m deep Used but 100% functional can be tested on site. No returns and no guarantee Pick-up in 13581 Berlin ... more information
Guillotine Magurite Type: Fromat 053 Efficiency: 4 000 kg/h Block size: 500 x 600 x 300 mm Operating temperature: to -18°C Engine power: 5.5 kW External dimensions: 2500 x 1150 x 1800 mm Entirely made of stainless steel Weight: 760 kg Power: 400V 50Hz 3N Magazine status: 1 piece Condition: used, ready to work
This Glass VSM 150 mixer is designed to handle all types of products ranging from the most delicate (salads) to the most compact (dry sausages). Technical details: - Manufacturer: Glass. - Type: VSM 150. - Year: 2011. - Machine n°3335 - Power: 1,375 kW. - Weight: 270 kg. - Frequency: 50 Hz. - Amperage: 3.58 A.
The versatile blender from RUHLE allows you to mix or marinate products in a short time, it is ideal for meat, poultry, fish, vegetables, fruits, nuts and other foods. The MKR 130 mixer has a capacity of 130 liters and is controlled by an external control panel based on LED technology. Ruhle has given its customers the ability to adjust the mixing speed to the needs of the product. The maximum speed is 50 rpm. Technical details: - Manufacturer: RUHLE. - Type: MKR 130. - Capacity: 130 L. - Weight: 320 kg. - Power: 3.2 kW. - Voltage: 400 V / 50 Hz. - Machine dimensions (L x W x H): 1200 × 900 × 1250 mm - Vacuum churn. -Stainless steel. - Manual failover. - Cooling system. - Variable speed from 0 to 25 rpm. - Churning arm and mixing arm. -Microprocessor.
Item Condition Wear Function active Location Soest Dismantling by buyer Price 1650,00 € VB ... more information
Item Condition: Signs of Use Availability: as of now Disassembly: by buyer Location: Soest Ceiling Air Cooler: GEA - DEA 081D Power ratings: 230 V, 50/60 Hz Internal dimensions approx.: W 2400 x H 2400 x L 3296 Price: 1450 € VB System: in operation Location: near Soest ... more information
4 loading trolleys with lids Quantity 4 Availability: immediately ... more information
A lifting-tilting device for loading trolleys made of stainless steel is sold Year of construction 2018 Max. load capacity up to 300 kg The plant is in very good condition and has been dismantled Price from stock 4000.-€ net ... more information
Piston Filling Machine/Sausage Filling Machine/Piston Filler Manufacturer: FREY Type: KOMPAKTA 2-30 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and twisting of all types of casing. Particularly gentle filling with a clear filling pattern. Equipment: 30 litre filling volume Machine solid stainless steel Speed, rev speed and break length can be infinitely selected Level indicator, unit counter, number of units switch-off Serving Addition 1st Serving Portioning range 5 - 10,000 g Portioning speed up to 250 portions/min. Filling cylinder with a capacity of approx. 30 litres, solid stainless steel with sliding lining Piston made of high-quality, wear-resistant plastic Connected load 3.70 kW Three-phase 400 volts, 50 Hz, 3 phases LCD3 c ...
Used vacuum filler HANDTMANN, type: VF 628 with lifting device -partially overhauled- - for filling, portioning and twisting meat or dough products - Microcomputer controller PCK-4 - New colour display - Funnel divisible - with lifting device - Filling capacity: up to 6,000 kg/h - Maximum filling pressure: up to 72 bar General overhaul - New conveyor curve - new sprocket - Lifting device remounted - new chain - all bearings new The machine is in very good condition. Viewing and test run are possible by arrangement.
DMS DF25C Piston Filler used Machine was built in 2017 and is equipped with 3 grommets The machine is completely made of stainless steel (body, cylinder, piston and cover) and is in good condition, but should still be thoroughly cleaned before use Video about test run available ... more information
Combi steamer Manufacturer: UNOX / Type: BAKERTOP Specifications: Model oven: XEBC-06EU-E1R Including base frame & extractor hood 400V / 50/60Hz / 9.9 kW / 16 A CEE plug 230V Schuko plug for the extractor hood Year of construction: 2019 RRP with base: approx. EUR 10,000 General: BAKERTOP MIND. Maps Bakery Oven / Combi Steamer by Unox Body made of stainless steel Low energy consumption due to high-quality insulation Door with double security pane Air gap prevents strong heating of the outer pane inner glass pane can be opened for cleaning Door with carbon fiber door lock and long-bend door hinges Door hinge left / door handle right (door hinge can be changed to the right – see accessories) with condensate tray under the door (direct drain connection) Safety thermostat height-adjustable screw feet Baking chamber: ...
Aufschnittmaschine / Slicer Bizerba Type: VS 12 Specifications: 220-240 Volt / 50/60 Hz /1 A Year of construction: 2016 Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated including original Bizerba knife sharpener with normal carriage for sausage or cheese Luminous flux / 230V Schuko plug Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call. 03423-706493
Vacuum machine KOMET PlusVac 21 Specifications: Type: PlusVac 21 400 Volt / 50/60 Hz / 0.75 kW Total dimensions: H/D/W 100 x 65 x 50 cm Weight: approx. 65 kg Year of construction: 2004 Equipment: Dimensions welding chamber: H/W/D = 175 x 430 x 505 mm Welding length: 420 mm 20m³h Busch Vacuum Pump Plexiglass lid with shop window and curvature including 2 inserts Function checked condition see original pictures.
Fully automatic slicer Bizerba Type: A404 Specifications: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of construction: 2000 Function checked, machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call. 03423-706493