fruits, vegetables, delicatessen, instant-meals machines used for sale

Used filling and packaging line for delicatessen products, In use for mayonnaise, 500 g - jars,, Output: up to a maximum of 170 glasses/minute, consisting of:, OSMEKA - empty glass - depalletizing, pit design, year 2004, Output: 2 layers / minute,, buffer table with separation,, Turning and blowing machine, make Engler, year 2001, Output: max. 170 glasses/min,, Piston filling machine, make Engler, year 1998, Output: up to max. 200 glasses/min,, SAFELINE (METTLER TOLEDO99 metal detector, Drying tunnel, make ACI, Dri-Line Series, CLEVER sleever + shrink tunnel, LANGGUTH labeling machine, type E212/R-235, year 2000, Output: up to max. 170 glasses/min,, MR labeling technology, seal labelling, year 1998, Output: up to max. 200 glasses/min,, MEYPACK tray packer, year 1996, with foil wrapping machine + shrink tunnel, Output: 14,400 glasses / h - 20 cycles per minute

suitable for tomatoes and other soft fruits and vegetables, sawtooth-shaped cutting blades that move back and forth at high speeds move, low cutting pressure, max. product dimensions: 100 x 70 mm, Existing blade set: 4.76 mm cutting thickness, WILLICH BEARING. ... more information

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punch crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover

New device!, Completely made of stainless steel, for a daily output of max. 200 cans, suitable for can diameters: max. 157 mm and max. can height: 366 mm, Output: approx. 6-10 cans/min, opens cans with a single manual movement, no sharp edges (burrs) on the can. ... more information

New device!, O Opens cans with a single manual movement, O Powerful manual lid punch (crown punch), O Recommended for a daily output of up to a maximum of 200 cans/day., O No sharp edges on the can by using semi-blunt knives., O For extra large cans (Requires custom tools. Sold separately), completely made of stainless steel,, suitable for can diameters: max. 230 mm and max. can height: 328 mm, Output.: approx. 6-10 cans/min,

Plug and play potato scrambler., TECHNISCHE GEGEVENS, - Capaciteit :± 450 kg per uur input. Afhankelijk van soort product, gewenste schrap/schiltijd, de kwaliteit van het product en snelheid van de operator., - Constructie : RVS 304., - Vulinhoud : ± 25 kg., - Maximale productdiameter : 150 mm.Capaciteit ± 100 – 600 kg. per uur afhankelijk van soort en kwaliteit van het product en de gewenste snijmaat, - Schakelkast : Geïntegreerd in machine., - Voeding : 400 Volt, 50 Hz, 3 fase + aarde + nul (Europese norm). 24 Volt op bedieningsknoppen., - Aantal motoren : 1, - Totale electriciteitsconsumptie : max. 1,1 kW/uur., - Aansluitwaarde : 3,3 Amp., - Stekker : 16 A CEE, 5 polig., - Waterverbruik : Max. ca. 450 ltr/uur (naar behoefte regelbaar)., - Luchtverbruik (alleen bij automaat) : Afhankelijk van schraptijd., - Gewicht : ± 200 kilo, onverpakt., - Keurmerk : CE genormeerd., Construc ...

De-stemming machine, make Engler, type Supra E 10, overhauled, for removing stems or stalks, e.g. for cherries, mirabelles, plums and various berries, peeling pearl onions, removing petals from gherkins,, Capacity: depending on the raw material up to approx. 1 t/h, power: up to approx. 1 tonne / h, Dimensions / weight: L x W x H: approx. 2.5 x 1.2 x 1.7, approx. 450 kg

FAM piston filling machine for pasty products,, below level filling,, rotary machine with 10 stations,, Cylinder diameter: approx. 100 mm, cylinder length: approx. 390 mm,, Piston: diameter: approx. 100 mm, height: approx. 250 mm,, set up for container diameter: approx. 56 mm,, 2 sets of filling nozzles: filling opening 11 and 17 mm, filling tube length: approx. 162 mm,, Plastic conveyor belt, belt width: 85 mm,, Overall dimensions: 2,750mm x 1,500mm x 2,400mm., With pallet with s/s tank and control cabinet,, Internal tank dimensions: Ø 580 m x 690 mm,, Tank dimensions: 770 mm x 600 mm x 1570 mm,, Dimensions control cabinet: 800 mm x 600 mm x 2100 mm, and with trolley with parts,, Dimensions trolley: 1150mm x 600mm x 950mm and pallet with parts., Stainless steel platform with galvanized steel plate, dimensions: 2050mm x 1700mm x 3500mm

for removing the stone from fruits,, equipped with pitting insert for cherries - plate hole diameter 21-12,, The machine has 40 pitting plates, each with 108 holes., These holes are tapered and have an upper diameter of 21mm and a lower diameter of 12mm,, The machine is equipped with the following engines:, Main drive: 2.20 kW 1,500 rpm, Brush drive: 0.37 kW 3,000 rpm, Vibrator drive: 0.75 kW 1,500 rpm, The speed of the machine is infinitely adjustable via a hand wheel., Output: 12 - 80 / minute - depending on the type of fruit and the ripeness of the fruit, power: 12 - 80 strokes / min (stepless), Dimensions / weight: 1.6 tons

pitting plate for cherries 21-12,, Original Ferrum plate,, 108 holes,, outer diameter: 21 mm,, inner diameter: 12 mm,, very good condition. ... more information

pitting plate for cherries 21-12,, Original Ferrum plate,, 50 holes,, outer diameter: 29 mm,, inner diameter: 20 mm,, very good condition. ... more information

41 pitting plates for plums 34-20,, Original Ferrum plates,, 50 holes,, outer diameter: 34 mm,, inner diameter: 20 mm,, very good condition. ... more information

Slitting device for Ferrum Entsteinmaschine, type EA,, equipped with 25 new circular knives,, suitable for plates with 50 holes, e.g. 34/20 (plums), With this device, the fruits, which are still divided during pitting, are cut on the underside by the scoring knives. As a result, the fruits are not injured when the stone is ejected.

Slitting device for Ferrum Entsteinmaschine, type EA,, equipped with 25 new circular knives,, suitable for plates with 50 holes, e.g. 34/20 (plums), With this device, the fruits, which are still divided during pitting, are cut on the underside by the scoring knives. As a result, the fruits are not injured when the stone is ejected.

automatic rotary machine,, in use for mustard,, set up on round plastic cups with a diameter of 70 mm and a height of 80 mm,, additional format for rectangular cups: 55 x 43 x 17.7 mm, Filling volume: 5 - 200 ml, Output: up to 1,500 cups per hour,, Rotary consisting of:, Cup magazine, automatic unstacking of the cups,, filling station,, Lid station with corresponding lid magazine and automatic unstacking of the lids,, Output of the filled and sealed containers to an integrated collection table

Gear for Herbort drum cutting machine, type 120S, This is the first plastic gear wheel with a hub for a knife shaft., The gear has 58 teeth. ... more information

used to cut cabbage heads for sauerkraut production,, diameter of the cutting discs: 800 mm,, 4 pieces with 0.9 mm cutting thickness ... more information

Sorting, cleaning, blanching and peeling plant for carrots and beetroot, make Komen & Kuin, Blancher capacity:, 10 tons of carrots per hour up to 80°C,, 5 tons of beetroot per hour up to 80°C,, max. throughput time: 35 minutes,, Dimensions, approx.:, Height: 3.50 m, Width: 3.20 m, Length: 8.20m, matching:, 1) Sorting machines for beetroot, celery, etc. …., Dimensions, approx.:, Height: 2.60 m, Width: 2.40 m, Length: 6.90m, Fraction 1 to 3 cm, Fraction 2 to 7.5 cm, Fraction 3 to 10 cm, Fraction 4 Overflow, 2) washing machines, Washing machine 1: drum diameter approx. 80 cm,, Distance between the bars about 5 mm,, Length drum approx. 200 cm, Washing machine 2: drum diameter approx. 90 cm,, Distance between the bars about 10 mm, Length drum approx. 300 cm, 3) Stoner, 4) heat exchanger, 5) various ascending belts, 6) Read tape, 7) different pipes, 8) Different pumps

Linear runner for applying sign or wrap-around labels (wet glue) to cylindrical containers., Perfomance:, approx. 25-100 labelings/min freely adjustable via frequency converter, Design type:, Left-hand machine (The overlapping direction of the wrap-around labels depends on this), gluing:, 210 mm brass glue roller with quick change device with one pitch, from 19 to 3 mm (horizontal stripe gluing over the entire length of the label), label magazine:, Up to 3,500 labels with a length of 80-380mm, Working height of the conveyor belt:, 1,000mm, adjustable +-50mm, Carrier:, 80.5mm chain, length approx. 3m/ with snail, glue supply:, pleumatic glue pump with heating, Paintwork:, light gray Ral 7042, unless stainless steel, Electrical equipment according to VDE regulation: 400 volts, 3 phases, 50 Hz, control voltage 24, Volts / PLC Siemens, Degree of protection: IP-54, Connection value: approx. 0 ...

Length: approx. 7,000 mm, diameter: approx. 200 mm,, Distance between the screw flights: approx. 150 mm,, Working height: approx. 500 mm,, was used to remove cherry stones behind Ferrum pitting machines. ... more information