lathes used for sale

turning diameter:1250 mmswing diameter:1100 mmturning height:1000 mmtotal power requirement:37/45 kWweight of the machine ca.:18 tdimensions of the machine ca.:4500x2520x4605 mmStandard accessories:Chips Conveyor & Coolant TankOil/Water SeparatorMachine Cover (High guarding)Heat exchanger For Electrical CabinetAuto Lubrication in Guide way4 Jaw Manual Chuck 1000mmHydraulic UnitBT50 Tool Connection in RAMMetal frame and case in machine shipment packing(Wooden packing with metal base)3 colors Warning Tower LightChamber lightAnti- Dropping in Z axis -- Auto Motor Brake Systeminstalled options:Air Conditioner For Electrical BoxCoolant Through SpindleFilter Of Coolant WaterCE MarkTransformer

Available from 01.08.2024 ... more information

turning diameter:700/410 mmturning length:800 mmspeeds spindle 1:5000 1/minspeeds spindle 2:6000 1/minMain spindle capacity:32/25 kWhollow clamping cylinder:77 mmy-Axis min./max.:+/- 100 mmtool magazin::48 Postool taper:HSK 63 milling head speed:12.000 1/minmilling spindle drive:22,5 / 19 kWtotal power requirement:74 kVAdimensions of the machine ca.:6,50 x 2,68 x 2,00 msub spindle power:14,5 / 12,5 kWCNC - Turnmill with B-axis (torque-motor) and subspindle,5-axis simultaneously machining,alternating speed,MPC 1.0,3-D touchprobe BLUM TC62, Main spindle ISM 76, C axis and brake Subspindle ISM 52, C axis and brake Partly hollow clamping device for subspindle ( D = 52 ),Differential pressure device for main- and subspindle coolant device 8/20bar, 20/25 l/min, paperfilter,coolant through subspindle,Chip conveyer,Chuck flushing device (main- and subspindle), oilmist suction,flush gun,pneumati ...

swing diameter:320 mmcontrol:840 D SIEMENSturning speeds:5000 1/minspindle drive:20 / 27 kWchucking diameter:250 mmtravel -x axis:650 mmtravel -z axis:300 mmturret head:12 Pos.tool holder:VDI 40 toolpiece turning speed range:4000 1/minwork piece power:max. 11,7 kWweight of the machine ca.:8 tCNC vertical lathe,live tools,C-axis,high pressure pump 20 bar, 500l, filter,flush gun,3-jaw chuc,EWAB loading station right,chipconveyor,approx. 23.500h "machine on", approx. 8.000h "spindle on"

turning diameter:620 mmturning length:2.000 mmturret (x-stations):8 tool taper:VDI 40 turning diameter over bed slide:415 mmcontrol:8055 TC FAGOR spindle bore:80 mmrapid power traverse in X-and Z direction:10 m/minspeeds:0-650 / 650-2.500 1/mintotal power requirement:28 kVAweight of the machine ca.:3,6 tdimensions of the machine ca.:4,6 x 2 x 1,8 mteach-in lathe with tailstock MT 5, 8-hole turret,3 jaw-chuck

bar material dia.:38 mmturning length:350 mmturning speeds:7.000 / 7.000 U/minnumber of tools:30 (3 x 10) driven tools:ja / yes control:FANUC 31i-B5 rapid traverse:30 m/mintotal power requirement:10,5 kVAweight of the machine ca.:6,5 tdimensions of the machine ca.:2,50 x 1,45 x 1,75 plus Lademagazin mwork piece power:4 kWtoolpiece turning speed range:5.700 1/minmain spindle power:11 kWsub spindle power:7,5 kWCNC sliding headstock machine STAR ST 38,3 turrets,12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3,Fireextinguisher KRAFT und BAUER FB 703,partscatcher and conveyor belt (for long parts),LTA oilmist suction,chiller for oil,machining with oil as coolant,reading hours:approx. 14.500 hours "machine on", approx. 4.100 hours "machining"

turning diameter:220 mmturning length:200 mmcontrol:Fanuc 0i TD mit Manual guide, 10,4" LCD spindle speeds:4800 1/min.spindle nose:A2- 6bar material dia.:44 mmC-axis:0,001 °x-travel:155 mmz-travel:220 mmrapid power traverse in X-and Z direction:20 m/minspindle drive:11/15 KW ( FANUC ßiL12/10000 )coolant:8 barWeight approx.:2,4 tMachine size (LxWxH):1560x1450x1760 mm3-jaw hydraulic chuck:200 mmturret:12-fach, VDI 40 hydraulic unit:mit Lufkühler soft jaw:1 Satz CNC controller:Fanuc 0i TD mit Manual guide, 10,4" LCD Boring bar holder:2 St. 90°-Halter; 2 Stk. Fräshalter, VDI-40 Tool setter:manuell Automatic Pallet :14 Stk. Paletten mit Sicherheitseinrichtung soft jaw:1 Satz+SPECIAL PRICE+SPECIAL OFFER+main features:-high speed-high spindle torque-big spindle bore-automatic forced lubrication-hardened and ground guideways-brand-new design eterior-CE certificate of TÜV Rheinland, Germany ...

turning diameter:220 mmturning length:200 mmcontrol:Fanuc 0i-TF Manual Guide bar material dia.:26 mmspindle speeds:6000 1/min.spindle drive:7,5/11 kWrapid speed:20 m/mintravel -x axis:155 mmtravel - z:200 mmCNC controller:Fanuc 0i-TF Manual Guide (Werkstattprogrammierung) + 10,4" LCD turret:12 (hydr.) fachhydraulic unit:mit Lufkühlung hollow chuck:hydraulisch, 150 mmtool holder:4 Stück Innen (Ø32mm), 6 Stück Außen, 2 Stück Plan bar loader:optional Tool setter:manuel soft jaw:1 Satz BORING SLEEVES :6 Stk. (Durchm. 8, 10, 12, 16, 20, 25 mm) Contains:1.Control system Fanuc 0i-TD (8.4"COLOR LCD)2.Spindle motor 7.5/11KW Fanuc â8/8000i3.Spindle speed 6.000 RPM (Bar capacity: Dia 26mm)4.X/Z-Axis stroke 155/220 mm5.X/Z Axis rapid traverse 20/20 m/min6.Hyd.hollow chuck 6" x 3 jaws7.Hydraulic turret system 12 stations8.Hyd. Unit for chuck with air cooler9.Without tailstock10.Standard spla ...

max. turning diameter:102 mmturning length:450 mmswing dia.:494 mmbar material dia.:65 mmspindle turning speed - stepless:S1 / S2: 4.000 1/minspindle drive:S1 / S2: 18,6 / 11 kWTurret No.1 stations / rotary tools:10/10 VDI 30 Turret No.2 stations / rotary tools:10/10 VDI 30 Driven Tools:8.000 1/minwork piece power:3,7 kWtotal power requirement:90 kVAweight of the machine ca.:10 tdimensions of the machine ca.:6 x 2,5 x 2, mCNC-turning-center with 2 turrets,8 axis,2x 10-pockets turrets with live-tools, C-axis on both spindles,Y-axis +-35mm turret 1,2pcs. collet-chucks,chipconveyor,barfeeder,tooleye,approx. 60.000h "machine on", approx. 17.500h "spindle on"

turning diameter:340 mmturning length:480 mmweight of the machine ca.:5,2 ttransport dimensions LxWxH:2200 x 1720 x 2200 mdist. between centers:500 mmspindle diameter:100 mmspindle bore:62 mmno. of tools in turret 1:12 c-axis:360 grad 4-axis Okuma LB 300 built in 2004 with a large turret type V12 for 12 x L or M tools and a hydraulic tailstock.

turning diameter:50 mmturning length:40mm bei Automatisierung; sonst 100 mmcontrol:Fanuc Oi-TF (8,4 '' LCD-Monitor) greates pass round over bed:230 mmBar capacity:26 mmspindle speeds:6000 1/minspindle nose:A2-4 spindle drive:3.7/5.5 KW (Fanuc ?3/10000i) spindle bearing diameter:70 mmrapid power traverse in X-and Z direction:30 m/mintravel -x axis:220 mmtravel - z:220 mmautomatic feeds:0,001-5000 mm/minMachine size (LxWxH):1370x1630x1750 mmhydraulic motor:0,75 kWhydraulic pump:30 L/minhydraulic tank:30 lservo motor X-axis:0,75 kwservo motor Z-axis:0,75 kwweight of the machine ca.:1,5 tmachine dimensions:1490x1870x1610 xxcoolant system:100 Ltool holder:innen, außen, Bohrhülse etc. collet chuck:mit Adapter (hydraulisch) GANG TOOLING SYSTEM:(Linearschlitten; kein Revolver) facing tool holder:3 Stk.OD tool holder:2 Stk.I.D. TOOL HOLDER :(Ø 20 MM) X 4 Stk. BORING SLEEVES :10 Stk. (Ø 6, 8, ...

turning diameter:160 mmturning length:500 mmweight of the machine ca.:4 tThis machine comes from a training workshop.Technically, the machine is fully functional and in a well-maintained condition.  ... more information

bar material dia.:51 mmturning length:644 mmturning dia. over bed:600 mmturning diameter over slide:430 mmy-axis:100 (+-50) mmturning speeds:2x 5.000 1/minpositive location each:2x C-Achse, 0,001° GradSub spindle:ja/yes turret (x-stations):2x 12 VDI 30 Pos.driven tools:2x 12 Pos.turning speeds:2x 4.000 1/mincontrol:FANUC 18 iTB total power requirement:30 kVAweight of the machine ca.:8 tdimensions of the machine ca.:3,5 x 2,5 x 2,3 mturning- milling center with Y-axis,collet device on main and subspindle,high pressure pumps 2x 14bar,parts catcher/conveyor,barloader ENTL 10-65,chip conveyor,lot of accessoriesapprox. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding"

turning diameter:300 mmturning length:320 mmcontrol:Fanuc 0i TD MG max. swing diameter:520 mmspindle speeds:4800 1/min.spindle passage:44 mmspindle drive:7,5/9 kWbrand new CNC slant bed lathe with 1. Control system Fanuc Oi-TD (8,4" LCD monitor)2. X/Z-axis stroke 170/600 mm3. X/Z-axis rapid traverse 30/30 M/MIN4. Spindle motor 11 / 15 Kw5. Spindle speed 4500 rpm (Belt driven type)6. Spindle bearing dia. Ø 100 mm7. Bar capacity Ø dia 51 mm)8. Hydraulic Hollow chuck 8" x 3 jaws9. Hyd. unit for chuck with air cooler10. Servo driven turret system 12 stations11. Manual tailstock stroke 500 mm + quill stroke 100 mm12. Electrical cabinet with heat exchanger13. Standard splash guide14. Coolant unit15. Transformer (power source 380V)16. Chip conveyor H=1100 MM with trolley (chain type)17. Machine color Tongtai white/Dark grey18. Safety foot switch19. Tricolor lamp20. Fanuc warranty (western Eur ...

turning diameter:300 mmturning length:600 mmcontrol:Fanuc 0i TD swing diameter over bed slide:320 mmswing over bed:520 mmbar material dia.:64 mmspindle speeds:4500 1/min.spindle drive:11/15 kWturret:12-fach Tool setter:manuell brand new CNC turning center with Contains:1 CONTROL SYSTEM FANUC 0i-T (10.4" DISPLAY)2 X/Z AXIS STROKE 170/600 MM3 X/Z AXIS RAPID TRAVERSE 30/30 M/MIN4 SPINDLE MOTOR 11/15 KW5 SPINDLE SPEED 3,500 RPM (BELT-DRIVEN TYPE)6 SPINDLE BEARING DIA. F 120 MM7 BAR CAPACITY DIA. F 64 MM8 HYD. HOLLOW CHUCK 10" X 3 JAWS9 HYD. UNIT FOR CHUCK WITH AIR COOLER10 SERVO-DRIVEN TURRET SYSTEM 12 STATIONS11 MANUAL TAILSTOCK STROKE 500 MM + QUILL STROKE 100 MM12 ELECTRICAL CABINET WITH HEAT EXCHANGER13 STANDARD SPLASH GUARD14 COOLANT UNIT15 TRANSFORMER (POWER SOURCE 380V)16 CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE)17 MACHINE COLOR TONGTAI WHITE/DRAK GREY18 TRICOLOR LAMP19 FANUC  ...

turning diameter:520 mmturning length:600 mmcontrol:Fanuc 0i TF swing diameter over bed slide:320 mmmax. turning diameter:280 mmBar capacity:51 mmspindle speeds:4500 1/min.x-travel:200 mmz-travel:600 mmrapid power traverse in X-and Z direction:30 m/mintailstock quill stroke:100 mmtailstock adjustment:500 mmspindle drive:11/15 kWMachine size (LxWxH):3,440x1,820x2,380 mmmachine weight:4100 kglive center:4 MKturret:12-fach, VDI 40 Boring bar holder:BMT 65 hollow chuck:hydr. 250 mmbrand new CNC turning center with Contains:1. Control system Fanuc Oi-TD (8,4" LCD monitor)2. X/Z-axis stroke 200/600 mm3. X/Z-axis rapid traverse 30/30 M/MIN4. Spindle motor 11 / 15 Kw5. Spindle speed 3500 rpm (Belt driven type)6. Spindle bearing dia. Ø 120 mm7. Bar capacity Ø dia 64 mm8. CS axis function 0.001 degree spindle positioning9. Hydraulic Hollow chuck 10" x 3 jaws10. Hyd. unit for chuck with air cool ...

turning diameter:520 mmturning length:500 mmcontrol:Fanuc Oi-TF max. swing diameter:520 mmspindle speeds:4500 1/min.spindle drive:11 / 15 kWbrand new CNC slant bed lathe with Contains:1. Control system Fanuc Oi-TF (8,4" LCD monitor)2. X/Z-axis stroke 170/400 mm3. X/Z-axis rapid traverse 30/30 M/MIN4. Spindle motor 11 / 15 KW5. Spindle speed 4500 rpm (Belt driven type)6. Spindle bearing dia. 100 mm7. Bar capacity dia 51 mm)8. Hydraulic Hollow chuck 8" x 3 jaws9. Hyd. unit for chuck with air cooler10. Servo driven turret system 12 stations11. Manual tailstock stroke 275 mm + quill stroke 100 mm12. Electrical cabinet with heat exchanger13. Standard splash guard14. Coolant unit15. Transformer (power source 380V)16. Chip conveyor H=1100 MM with trolley (chain type)17. Machine color Tongtai white/Dark grey18. Safety foot switch19. Tricolor lamp20. Fanuc warranty (western Europe)Standard acces ...

turning diameter over bed:530 mmturning diameter over slide rest:320 mmturning length:2000 mmcenter height over bed:275 mmspeeds:18 - 1600 U/minspindle bore:60 mmbed width:430 mmengine output:17 kWweight:2700 kgspindle taper:7 dimensions of the machine ca.:5,5 x 1,40 x 1,75 m- 3-chaw chuck Röhm D = 350 mm - tool holder system - approx. 10 pcs. tool holder- workpiece wheigt between centers 500 kg - many accessories in 2 pcs. tool cabinets

:GN-1000 | GN-1250 | GN-1500 | GN-1750 turning diameter:1000|1250|1500|1750 mmturning length:1500/2000/3000/4000/5000/6000/8000 mmcontrol:Siemens 828D turning diameter over slide:830|1080|1330|1580 mmbed width:820 mmspindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mmspindle turning speed - stepless:4-600/4-400/4-400/4-300 U/minx-travel:750 mmz-travel:2000/3000/4000/5000/6000/8000 mmrapid power traverse in X-and Z direction:6 m/minservo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mmtailstock quill diameter:200 (295 opt.) mmtaper in tailstock:6 MKtool turret:8/10/12 fachtool holder -shaft diameter:32 (40 opt.) mmmain drive motor:30 (37 opt.) kWweight of the machine ca.:9/10/11/12/13 tpositioning accuracy:+0.01 / 300 mmrepeating accuracy:+0,005 mmmachine length:5000/6000/7000/8000/9000/10000 mmmachine  ...

turning diameter:2000 mmturning length:1500/2000/3000/4000/5000/6000/8000 mmcontrol:Siemens 828D turning diameter over slide:1640 mmbed width:820 mmspindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mmspindle turning speed - stepless:4-600/4-400/4-400/4-300 U/minx-travel:750 mmz-travel:2000/3000/4000/5000/6000/8000 mmrapid power traverse in X-and Z direction:6 m/minservo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mmtailstock quill diameter:200 (295 opt.) mmtaper in tailstock:6 MKtool turret:8/10/12 fachtool holder -shaft diameter:32 (40 opt.) mmmain drive motor:30 (37 opt.) kWweight of the machine ca.:9/10/11/12/13 tpositioning accuracy:+0.01 / 300 mmrepeating accuracy:+0,005 mmmachine length:5000/6000/7000/8000/9000/10000 mmmachine width/height:2500 x 2400 mmmax. workpiece weight between centres:900 ...