- Automatics (Lathes) For Bars (21)
- Bench Lathes For Precision Mechanics (24)
- Carousel Turning Machines (Lathes) (52)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (25)
- CNC Cycle Turning Machines (53)
- CNC Double Spindel Turning Maschines (Lathes) (15)
- CNC Long Turning Automatics (30)
- CNC Long Turning Machines (25)
- CNC Multiple Spindel Turning Lathes (11)
- CNC Sloping Beds (3)
- CNC Turning Automatics (26)
- CNC Turning Centers (212)
- CNC Turning Machines (484)
- Cutting-Off Machines (11)
- Cycle Lathes (35)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (278)
- Facing Disks (2)
- Facing Lathes (15)
- Facing Lathes With Tailstock (4)
- Feed Automatics (3)
- Heavy Lathes (26)
- High Precision Lathes (5)
- High Precision Turning Machines (Lathes) (9)
- Hollow Spindle Turning Machines (Lathes) (2)
- Horizontal Turning Centres (19)
- Horizontal Turning Machines (Lathes) (4)
- Longitudinal Turning Machines (Lathes) (6)
- Lunettes (13)
- Multi Spindle Automatics For Bars (14)
- Multi-spindle turn automatics (22)
- NC Universal Turning Machines (Lathes) (1)
- Other Turning Machines (35)
- Pointed Turning Automatics (Lathes) (4)
- Rotating Benches (16)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (7)
- Sloping Bed Turning Machines (Lathes) (1)
- Special Purpose Turning Machines (2)
- Spindle Turning Automatics (Lathes) For Bars (2)
- Thread Turning Machines, External (1)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (14)
- Turning Benches (3)
- Turning Machines (Lathes) (142)
- Turning Machines (Lathes) And Turning Automatics (4)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (5)
- Universal Lathes > 800 Mm Diameter (10)
- Universal Lathes Up To 800 Mm Diameter (10)
- Universal Turning Machines (Lathes) (28)
- Vertical Turning Centres (3)
- Vertical Turning Machines (35)
- Vertical Turning Machines With Pick-Up Spindle (3)
- Vertical Turning Machines, Open Gap And Straight-Sided (2)
- Vertikal Turning Machines (Lathes) (42)
- more
- A.I. HEMBRUG (1)
- AB (1)
- abb (3)
- ACCUWAY (3)
- AERO (1)
- AFM (3)
- AI (2)
- AJAX (1)
- Alex Tech (2)
- ALFING (1)
- ALLG (1)
- AMUTIO (1)
- AMUTIO-CAZENEUVE (1)
- ARAD (2)
- ARAD ELITE (1)
- ARGUS - FLOWSERVE (1)
- ARIX (1)
- AVM (1)
- AVM ANGELINI (5)
- AX SUPER PRECISION (1)
- AYEL-TECH (1)
- BARUFFALDI (1)
- BAUER (2)
- Benzinger (9)
- BERG (1)
- Bernardo (19)
- Berthiez (4)
- BEZINGER (1)
- BIGLIA (23)
- Binns + Berry (2)
- BISON (1)
- BOEHRINGER (15)
- BOEHRINGER MAZA (1)
- BOLEY (8)
- BORUI (1)
- BOST (1)
- BRAUN (1)
- BRAUN ZERBST (1)
- BREUNING IRCO (1)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUDAPESTI (1)
- Buffalo (2)
- BUFFALO CHALLENGER (1)
- BULLERI (1)
- Bulmak (3)
- BULMAK / ZMM (3)
- BUMOTEC (1)
- BÖHRINGER (3)
- CAORLE (1)
- CARNAGHI (1)
- CATALANO (1)
- CAZENEUVE (34)
- CAZENUEVE (1)
- CEGIELSKI (1)
- CELORIA (1)
- CHALLENGER (1)
- Chevalier (4)
- Chiron (2)
- CHOCIANÓW (1)
- CHOLET (1)
- CINCINNATI (3)
- CINCINNATI-MILACRON (1)
- CINNCINATI (1)
- Citizen (30)
- CITIZEN CINCOM (1)
- CKD BLANSKO (4)
- CLOVIS (1)
- CMIDURANGO (1)
- CMT (1)
- CMT MASCHINENBAU (1)
- CMT URSUS/EMCO (1)
- CMZ (15)
- CNC GORBREX (5)
- Colchester (71)
- COLOMBO (2)
- COLOMBO + LENNA (1)
- COMBI (1)
- Comev (9)
- CONTUR DIALOG (1)
- CORTINI (1)
- CRAVEN (2)
- CS (1)
- D160 (1)
- Daewoo (15)
- DAEWOO (DOOSAN) (1)
- Dainichi (2)
- DANOBAT (1)
- DE BERNARDI (1)
- DE MOOR (1)
- DECKEL MAHO (1)
- DECKEL-MAHO (1)
- DEFUM (1)
- DEMOOR (1)
- Diedesheim (2)
- Dimitrov (2)
- DINN SPINNING LATHE (1)
- DIVERS (1)
- DMC (1)
- DMG (23)
- ... more
Manufacturer:
(Category: 102)
New in: 2007
used
Length: 2600mm, width: 1700mm, height: 1800mm, connected load: approx. 12.5kW, on-site inspection is possible. ... more information
New in: 1995
used
Length: 2300mm, width: 800mm, height: 1500mm, weight: 1.5t, supply voltage: 400V, on-site inspection is possible. ... more information
New in: 1985
used
Weight: 1.5t, connected load: approx. 1.5t, on-site inspection is possible. ... more information
used
Center height: 160mm, center distance: 900mm, with various accessories, an inspection is possible. ... more information
New in: 1957
used
Center height: 360mm, bed width: 430mm, turning length: 1500mm, with documentation. ... more information
used
Turning length: 250mm, center height: 240mm, swing/ over slide: 280/ 185mm, operational hours counter: 55,325h, with documentation, without tools, was maintained regularly, an inspection is possible. ... more information
used
Connected load: 58.5kVA, operational hours counter: 50,559h, with documentation, without tools, was maintained regularly, an inspection is possible. ... more information
New in: 2007
used
A single-spindle pick-up lathe is available, max. swivel diameter: 250mm, working spindle nose: ASA 6 inch, spindle in front bearing: 110mm, max. chuck diameter: 250mm, weight: 13t, operating hours: approx. 82,400h, with documentation, an on-site inspection is possible. ... more information
New in: 2006
used
A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible. ... more information
New in: 1996
used
Max. turning diameter: 340mm, turning length: 300mm, control: OSP 700 L, length: 4500mm, width: 2500mm, height: 2800mm, on-site inspection is possible. ... more information
New in: 2007
used
X-travel: 425mm, swing/ over bed/ slide: 970/ 710/ 370mm, spindle rotational speed: 125-1480/min, max. load: 3t, width: 2630mm, height: 2170mm, with tools, was maintained regularly, an inspection is possible. ... more information
New in: 2017
used
Spindle opening: 2x 65mm, turning diameter: 230mm, turning length: 673mm, turning chuck diameter: 210mm, max. rotational speed: 5000/min, spindle power: 11kW, controls: FANUC Series 31i-MODEL B, connected load: 60kVA, weight: 8.5t, operational hours counter: 9860h, with documentation, accessories, various tools, clamping devices and bar loader, without robot, was maintained regularly, an inspection is possible.
New in: 1988
used
Swing ober bed/ slide: 600/ 360mm, center height: 350mm, bed width: 450mm, width: 2050mm, height: 2000mm, weight: 7,4t, including documentation, various tool holders, two stands, base jaws, counter tips and various spare parts. ... more information
New in: 1996
used
X-travel: 520mm, z-travel: 200mm, circumferential diameter: 325mm, spindle bore: 60mm, rapid traverse: 30m/min, number of tool positions: 25, control: Index C200-4, including three-jaw chuck, pallet circulation system, coolant tank, scraper belt conveyor, tool holder and documentation, on-site inspection is possible.
New in: 1965
used
Center height: 450mm, maximum turning diameter: 700mm, maximum turning length: 4000mm, chuck range for the four-jaw chuck: 100 - 700mm, additional clamping cartridge span range: 500mm, spindle speed ranges: 8, adjustable from 1 to 75 rpm, feed rates: continuously adjustable from 1 to 200mm per minute. The feed drives were upgraded in 2009 to Siemens 1FK7, including all necessary electrical work, which allowed for the elimination of the PIV feed gearbox. An on-site inspection is possible.
New in: 1990
used
Turning diameter cross slide/bed: 170mm/400mm, turning length: 550mm, spindle bore: 42mm, bar length: 3200mm. Tool turret: 12-position turret, control: TX8F, loading magazine: LNS Hydrobar, spindle hours: 30707. Including chip conveyor, tailstock (not in use). Available from May, 2024. ... more information
New in: 2007
used
Traverse paths facing slide/top slide/tailstock quill: 345mm/125mm/190mm, longitudinal/face feed per revolution: 56mm/28mm, speed: 2240rpm, max. workpiece weight: without setting block: 500kg, 1 setting block: 630kg, 2 setting blocks: 800kg. Circumferential diameter over bed/plane slide/bed spreading: 570mm/365mm/600mm. The automatic plan feed is defective. Documentation available.
used
Center width: approx. 1400mm, center height: approx. 550mm, spindle diameter: approx. 100mm, faceplate: 1000mm/820mm. Speed: 560rpm, lathe chuck: 400mm/320mm. ... more information
New in: 1995
used
Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016.
New in: 2003
used
Max. turning diameter: 200mm, max. turning length: 400mm, spindle speed: 6000rpm, bar capacity: 42mm, weight: approx. 4300kg. ... more information