rubber machines used for sale

Refer to code 1010 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.  ... more information

Refer to code 1009 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.  ... more information

Refer to code 1008 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.  ... more information

Refer to code 1007 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.  ... more information

Refer to code 1006 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.  ... more information

Refer to code 1004 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.  ... more information

Refer to code 1003 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.  ... more information

Refer to code 1002 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.  ... more information

available GK-110E / Intermix complete with hydraulic Hopper, gear Box and Motor Description attached!  ... more information

chamber volume: - literuseable volume: 1,6 literfriction: - motor drive power: 22 kWCondition: used - overhauledSpecification: Laboratory internal mixer - second-hand- chamber volume: approx. 1.6 l- closing system: front door with pneumatic piston- plunger: pneumatic- rotor geometry: tangential type- Oil-free self-lubricating sealing rings- New rotary union for water cooling- New main gearbox- New AC motor: 22 kW- Control cabinet: NEW- Control panel with OP 7: NEW- Wiring: NEW- New frequency converter for variable speed- Paintwork: according to customer specifications- With safety devices according to current standard- overhauled, with warranty 12 months, with CE-marking, Operating and maintenance instructions in EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamber volume: 170 literuseable volume: -- literfriction: -- motor drive power: 800 kWCondition: used -Specification: internal mixer used as additional option: Rubicon batch-off plant- capacity approx.: 170 litres- rotor model: tangential design- drive controller: Allen Breadley- Control: Mitsubishi- Motor speed: 1,000 rpm- Gearbox: Panamax 9000 make Sumitomo- Rotor speed: 5.6 - 55.6 rpm- Chamber hardness: 45 -50 HRC- Motor: 800 kW - 1000 rpm - 380 V, 50 Hz- Moror make: Teco- Output: 27 tons/day- Cycle time approx.: 4 - 8 min- Height approx.: 7,500 mm- Weight approx.: 35,000 kg, incl. gearbox and motorAvailable as an option:- Batch-off system Make: Rubikon / Mattech- Cooling bars max.: 300 mm / 2x 80 ...

Press force max.:: -- kNheating plates:: 600x600,500x500 mmelectrically heated:: -- °Cpiston stroke:: -- mmno. of stages:: 1-3 Condition: Used,Specification: 5x vulcanising press, second-hand consisting of: 2x make Simpelkamp, 2x make Reinartz, two-daylight presses 1x make Reinartz 1x crane system 1x pedestalsSimpelkamp presses:- Clamping force: 250 t- number of floors: 1- Closing: from bottom to top- Heating plates: 2 electric plates- Dimensions of heating platens: 600 x 600 mm- Distance between heating platens: 530 mm- Hydraulics: 200 bar- AC machine power oil pump: 7,5 kW- Dimensions approx.: 1,300 x 1,000 mm- Unit height approx.: 2,800 - 3,000 mmTwo similar  ...

clamping force: 350 kNinjection volume: 59 cm³screw diameter: 25 mmplaten size: 400 x 400 mmCondition: used,Specification: injection moulding machine for rubber - used International size: 350-90 clamping unit:- clamping force: 350 kN- clamping platen size: 400 x 400 mm- Clear distance between tie bars: 270 x 270 mm- Mould installation height min.: 225 mm- Distance between clamping platens: max. 550 mm- Opening stroke max.: 325 mm- Ejector stroke: 125 mmInjection unit:- Screw diameter: 25 mm x 20D- Injection volume max.: 49 cm³- Injection part weight: 59 g/hp- Max. injection pressure: 1,860 bar- Screw circumferential speed: 37 m/min- Cylinder heating: 4x 900 W- Nozzle heating:  ...

DESMA 400 ton rubber injection molding machine -Model : SIGMA 4000  ... more information

available Cracker Mill Rolls dia 600 x 800mm Description attached!  ... more information

clamping force: 11000 kNinjection volume: 12500 cm³screw diameter: -- mmplaten size: -- mmCondition: used,Specification: injection moulding machine for rubber - used, in very good condition machine was serviced annually by manufacturerclamping unit:- Euromap (size): 11000-25600- clamping force: 11.000 kN- size of heating platens L/W/H: -- x -- x mmInjection unit:- Injection volume max.: 12,500 cm³- Injection pressure: 2050 bar- Dosing force: 118 kN- Control: Siemens S7- Connected load: 3x 400 V, 50 Hz, N- Total current: 276 A- Back-up fuse: 300 A- Pump drive: 277 bar- Driving power: 45 kW- Weight approx.: 43.8 tOperating hours approx.: 33,130 hoursThe data for this ad was created with ModulMWS - t ...

clamping force: 350 kNinjection volume: 58,5 cm³screw diameter: 28 mmplaten size: 260 x 254 mmCondition: used,Specification: injection moulding machine for TPE - usedclamping unit:- clamping unit: vertical- clamping force: 350 kN- opening stroke max.: 300 mm- platen distance max.: 500 mm- Mould installation height min.: 200 mm- Clear width between tie bars: 260 x 254 mm- Ejector stroke max.: 80 mm- Clamping unit: VV- Lift of protective bonnet: 500 mmInjection unit:- Screw diameter: 28 mm- Screw L/D ratio: 18.6- Screw stroke max.: 95 mm- Injection volume max.: 58.5 cm³- Injection pressure: 1577 bar- Plasticising flow: 8.6 g/s- Injection flow: 85.5 g/s- Connected load: 3x 400 V, 50 Hz- Max. heating power: 5.8 kW- Drive power: 7,4 kW- Total power:  ...

clamping force: 1.013 kNinjection volume: 400 cm³screw diameter: 25 mmplaten size: 335 x 400 mmCondition: used,Specification: injection moulding machine for rubber - usedclamping unit:- clamping unit: vertical- clamping force: 1.013 kN- size of heating platen: 335 x 400 mm (standard) core turning unit Injection unit:- screw diameter: 25 mm- Barrel diameter: 51 mm- Injection volume max.: 400 cm³- Injection pressure: 1,500 bar- Connection value: 3x 400 V, 50 Hz 42A fuse protection (incl. periphery)- Electrical power: 29,1 kVA- Control: G8 Control- Hydraulics: 250 bar (tank 200 litres)- Further connections: Cooling water inlet/outletDimensions L/W/H approx.: 2,300 x 3,400 x 2,250 mmWeigh ...

TECHNICAL DATA INTERNAL MIXER: MODEL: GK 255 N - with tangential geometry ZZ2 VOLUME OF THE MIXING CHAMBER: approx. 250 ltr. USABLE VOLUME: approx. 190 ltr. BATCH WEIGHT: approx. 230 kg ROTOR speeds (standard): 0-60 rpm DRIVE POWER: 1500 kW Hydraulic feeding with 2 hydr. Cylinders The machine consists of 3 parts: substructure, housing and hydraulic funnel. The transmission is also part of the offer (engine and FU can be offered). ______________________________________________________________________ _____________ TECHNICAL DATA INTERNAL MIXER: MODEL: GK 255 N - with tangential geometry ZZ2 VOLUME OF MIXING CHAMBER: approx. 250 ltrs. USEFUL VOLUME: approx. 190 ltrs. BATCH WEIGHT: approx. 230 kgs ROTOR SPEEDS (standard): 0-60 rpm DRIVE POWER: 1500 kW RAM ACTUATION: hydraulic The machine is in 3 piece design including basement, body  ...

TECHNICAL DATA INTERNAL MIXER: MODEL: GK 135 E - with interlocking rotor geometry VOLUME OF THE MIXING CHAMBER: 140 ltr. USABLE VOLUME: approx. 100 ltr. BATCH WEIGHT: approx. 120 kg SPEEDS: 10/10-50/50 rpm DRIVE POWER: 600 kW RAM ACTUATION: hydraulic The machine consists of 3 parts: substructure, housing and hydraulic funnel. The transmission is also part of the offer (engine and VFC can be offered). ______________________________________________________________________ _____ TECHNICAL DATA HEAVY DUTY INTERNAL MIXER: MODEL: GK 135 E - with intermeshing rotor geometry VOLUME OF MIXING CHAMBER: 140 ltrs. USEFUL VOLUME: approx. 100 ltrs. BATCH WEIGHT: approx. 120 kgs ROTOR SPEEDS: 10/10-50/50 rpm DRIVE POWER: 600 kW RAM ACTUATION: hydraulic The machine is in 3 piece design including basement, body and hydraulic hopper. The gearbox  ...