Manufacturer:
(Category: 308)
BORA ROOTS VACUUM PUMP WITH FRAME AND FILTER UNIT / SILENCER Ser. No.: 2048.09 // Type: 353 C Equipment / Additional information: 800 m3/h // -500 mbar RPM: 2300 // kW: 14.5 ... more information
CONSTANT SPEED FOOD GRADE CONVEYOR BELT (SUITABLE FOR HAND PRODUCT REMOVAL) Equipment / Additional information: Size (cm): 310x70x90 // 150 KG Belt width: 55 ... more information
CUP LABELING / LABELER BLINK RM 50 (FOUR OR TWO CUP / SIDE AND GROUND) M. No.: 950136 Voltage: 380 V // 50 Hz // 6A ... more information
M. No.: 560037 Colours: 6 Equipment / Additional information: Consists: • stacker • printing machine • Cup feeding • stapler Max. cup rim diameter 130 mm Min. cup rim diameter 55 mm production speed each according to cup size, quality and Raw materials with UV drying up to 24,000 cph (without positioning) With positioning 12'000/h - 15'000/h depending on cup, format and flap. El connection value with drying approx. 26 kVA Electrical connection 3 x 400 V, 50 Hz Air connection / consumption 6 bar / approx. 50 m3/h Weight approx. 7,800 kg
BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 216 105 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL
BORA ROOTS VACUUM PUMP WITH FRAME AND FILTER UNIT / SILENCER Ser. No.: 552.03 // Type: 293 E Equipment / Additional information: 440 m3/h // -400 mbar RPM: 1722 // kW: 7 ... more information
WATER TREATMENT PLANT CONSISTING OF WELLMATE WATER SOFTENING & REVERSE OSMOSIS SYSTEM MERLIN RO-EASY 40 S. No.: RO-EASY40 – 151557/201 Equipment / Additional information: V 230 // Hz 50 // A 2,4 // KW 0,55 Permeate output at feed water temperature 15 ° C and 4 bar flow pressure: 40 I / h (incl. Pressure vessel 25 I)
M. Number: 405198 Item: 381021 Power supply: 230V / 50Hz Power: 0.55KW Max pump pressure: 14 bar Max operating pressure: 14 bar Mediumstem min / max: 5/35 C Min concentrate flow: 84l / h Permeate Max: 250l / h Permeat backpressure max: 0.3 bar ... more information
Screw: Ø100 mm x 30 L/D Screw speed: 10-60 min-1 Cylinder: Feed zone 80 mm , without feed roller Filling hopper with sight glass and min. sensor Temperature control by electric heating sleeves Dosing stroke: 350 mm max. Plasticizer weight: approx. 2400g max. at PPGF30 Head: Cutting head with pneumatic knife cleaning Rod nozzle Ø100mm, wide slot nozzle 220x18mm Drive: hydraulic, with Rexroth components Motor: SEVA, SEV-160L4, 15 kW, 1460 rpm/1, 400 / 690 V Electrical control: Siemens S7-300, visualization Siemens Simatic OP27 Dimensions: 6850 x 1500 x 2000 mm (LxWxH) Weight: 3,500 kg
Side seal bag machine for carrier bags with glued-in grip hole reinforcement (patch handle). servo machine. The machine is ready for transport, new backup batteries have been installed. Max. welding width: 850mm Min. Feed: 200mm Max. feed: 600mm Max. power: 150 pc/min Main voltage: 400V Control voltage: 230V Connected load: 42 KVA Pre-fuse: 80 A
Year: 2014 - technically efficient, ready to work - after full service - disc diameter: 500 mm - cutting angles -45°/90°/+45° - operator panel with Windows - working direction from left to right - label printer - chip extraction and waste transporter ... more information
Specifications: Saw blade 5600 mm Conveyor belt, width 1000 mm Roll diameter 600 mm Cutting height above the conveyor belt approx. 5 mm - 150 mm Drive power saw motor 1.5 kW Cutting speed approx. 350 – 1500 m/min, infinitely variable Drive power conveyor belt approx. 0.12 kW Feed speed conveyor belt infinitely variable
Calender with stretching line Roll width: 450 mm Diameter of roller: 252 mm Stretching line length: 2500 mm incl. 4 GWK temperature control units, 12 kW heating capacity ... more information
Laboratory Heating Press EHSP20H – Used Demonstration Machine Table press / electric screw press with pressing pressure 20 KN (2 tons) With heating device up to 200 °C from above and below. Press drive with screw jack gear, reduction ratio 1 : 12, spindle diameter 32 mm, Pitch 6 mm, pressing area approx. 100 150 mm, clear height and stroke approx. 300 mm. Geared motor 0.37 KW, 1,390 rpm, 4-pole, with spur gear i = 1 : 5, Speed 150 mm / min. Max. dynamic load 20 kN. With reversing control, control box and motor protection plug. Sturdy press frame made of steel. Undertable made of high-quality aluminium profiles 4545 mm, table surface 600600 mm, Table top made of multiplex board. Total weight approx. 100 kg. The table press has a pressing pressure of 20 kN (dynamic load). Typical applications are pressing work with exact lining. Suitable for pressing bonding, embo ...
STRATASYS OBJET30 PRIME V3 3D PRINTING (year 2015) 3D printing of medical implements that require prolonged contact with the skin, such as headsets or surgical guides. Prototypes of joints, connections and sealants. The Objet30 Prime printer offers 12 different materials so you can create accurate prototypes of consumer products with smooth surfaces and flexible components from your desktop. Printing time: 1102 Specifications: layer thickness 28 microns for Tango materials; 16 microns for all other materials Precision 0.1 mm could vary depending on part geometry, size, orientation, material, and post-processing method model materials Biocompatible (MED610) Material for high temperature (RGD525) Rigid and opaque white material (VeroWhitePlus) Rigid and opaque blue material (VeroBlue) Rigid and opaque black material (VeroBlack) Rigid and opaque gray material (VeroGray) ...
Tensile testing machine for plastics, textiles, etc., type Z 653, built 1974, measuring range: 0 - 50 kp / 0 - 500 N. Pulling speed: 25 - 500 mm /min. ... more information
Side seam bag machine for carrier bags with glued-in grip hole reinforcement. servo machine. The machine is ready for transport, new backup batteries have been installed. Mother role diam. : 800mm Max. welding width: 850mm Min. Feed: 200mm Max. feed: 600mm Max. power: 150 pc/min Main voltage: 400V Control voltage: 230V Connected load: 42 KVA Pre-fuse: 80 A
Year: 2001 - technically efficient, ready to work (directly from the client) - corner cleaning machine SV 494 CNC - for-head welding machine AKS 6110 - turning station - cooling station - flash limitation: 0.2 - 2 mm ... more information
- technically efficient, ready to work - after full service - 1 kW engine - doorknob function - pneumatic horizontal pressure - copy template ... more information
Washing basin: 4 x 1.2 m. In stainless steel, with endless sludge. Electrical panel. ... more information