lathes used for sale

Lathe with bezel and two heads.  ... more information

-Peak height 240mm -Peak width 1000mm -Control Siemens -Circular permes.about bed 490mm -Umlaufdurchmes.ü.Planschlitten 195mm -Crumpling 520mm -Spindeldurchmes.im in front. Bearing 100mm -Spindle bore 63mm -Torque 736Nm  ... more information

Ladies and gentlemen, below we offer the following machine for sale: from a tool making, single-layer run and very well maintained. Still under power. CNC lathe Voest - Alpin - Weipert WNE 490 X 1000, peak height 240mm, tip width 1000mm, control Siemens, circulating through mes.over bed 490mm, circulating permes.via plan slide 195mm, crimping 520mm, Spindeldurchmes.im front. Bearing 100mm, spindle bore 63mm, torque 736Nm.

Cam controlled multi spindle automatic lathe, used 6 main spindles, control: Siemens S5 PLC, electronical trip dog control type „Balluff gear box for thread milling (2 pieces) pick up for rear machining in pos. 6, work piece sorting shute, barloader: IEMCA-PRA 40/33 P -rack type- coolant pump, threading clutches, stock stand and reel, tooling: could be different like pictures partly revised

8 main spindles, Chucker AFH130 for complete machining means front- and back side, Control Siemens Sinumerik 840DI, complete revising and new configuration of this machine in year 2010, loading arm, for loading and disloading, Workpiece turn around station in pos. 4 , position 4 with workpiece length control, CNC compound slide in pos. 5, coolant pump with magnet candle filter, tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo

Control Sinumerik 810 D Circulation diameter over bed 490 mm Circulation diameter over face carriage 280 mm Turning length 1,000 mm Spindle bore 93 mm Speed ranges 1-625 / 1-3,000 rpm Drive power 16 kW Dimensions approx. 3.0 m / 1.8 m / 2.0 m Machine weight 3.6 t Tailstock stroke 180 mm  ... more information

Control Fanuc 0iTF Main spindle: bar passage 45 mm, drive power 13 kW, 0-6,300 rpm Counter spindle: drive power 7.5 kW, speed range 0 -6,300 rpm Tool turret with 12 positions for driven tools VDI 25 radial Drive power of the driven tools 4 kW Travel range of the y-axis + 40 / - 30 mm C-axis for the main and counter spindle Machine with precast dust edge, spindle extension, tool measurement, chip conveyor, additional high-pressure coolant pump 14 bar, Accessories: Short bar feeder for bar material length 100-1200 mm, Irco ILS KUL 5012 -II, as well as a material layer Breuninger ILS-MUK-70-IV, new tool accessories, clamping heads, chucks and connection adapter worth €18,000, chip conveyor, operating instructions

Inv. Num. : 7587 Type: GLS 150 Producer: Goodway Created: 2013 Parameters: Control system: Fanuc Maximum turning length: 500 mm Maximum turning diameter over bed: 310 mm Maximum length of travel in the X-axis: 180 mm Maximum feed in the Z-axis: 520 mm Weight: 3200 kg  ... more information

Inv. Num. : 7604 Type: LC 380 Produzent: Hardinge Erzeugt: Parametern: Steuerungssystem: FANUC Series 21-T Betriebsstunden: 95841 h Maximaler Drehdurchmesser über Bett: 380 mm  ... more information

Inv. Num. : 7563 Type: S90/200 Produzent: PINACHO Erzeugt: 2002 Parametern: Maximale Drehlänge: 400 mm Maximaler Drehdurchmesser über Bett: 400 mm Abstand zwischen Spitzen: 1150 mm Länge: 2880 mm Breite: 995 mm Höhe: 1620 mm Gewicht: 1100 kg  ... more information

Inv. Num. : 7546 Type: 125-CCN Produzent: Schaublin Erzeugt: 1996 Parametern: Steuerungssystem: FANUC Series 20 T Einschaltstunden: 7352 h Maximal-Drehlänge: 500 mm Maximaler Drehdurchmesser über Bett: 270 mm  ... more information

Inv. Num. : 7547 Type: SV 18 RD/750 Producer: TOS Generated:- Parameters: Maximum turning length: 750 mm Maximum turning diameter over bed: 380 mm Maximum turning diameter over support: 215 mm  ... more information

Inv. Num. : 7575 Type: VL7 Produzent: Emag Erzeugt: 2010, GO 2012 Parametern: Steuerungssystem: Fanuc 32i TB Max. Drehdurchmesser: 420 mm Maximale Drehzahl der Spindel: 3400 1/min Verfahrwege X: 850 mm Verfahrwege Z: 315 mm Spannfuttergröße: 400 Länge: 5250 mm Breite: 3500 mm Höhe: 3500 mm Gewicht: 9000 kg Ausstattung: Kühlung Späneförderer Angetriebene Werkzeuge Messsonde

Inv. Num. : 7067 Type: GA-2600 Producer: Goodway Created: 2005 Parameters: Maximum turning diameter: 350 mm Max. turning length: 606 mm Maximum main spindle power: 15 kW Maximum spindle speed: 4000 1/min Spindle bore: 76 mm Max. rod diameter: 66 mm Clamping diameter: 254 mm Length: 2445 mm Width: 1630 mm Height: 1890 mm Weight: 4000 kg

Inv. Num. : 5839 Type: PUMA TT 1800 SY Producer: DOOSAN Created: 2013 Parameters: Control system: FANUC 31i-B Duty cycle: 8981 h Maximum turning length: 600 mm Maximum turning diameter over bed: 300 mm Maximum turning diameter over support: 230 mm Number of spindles: 2 pieces Maximum main spindle power: 22 kW Spindle clearance: 76 mm Maximum spindle speed: 5000 1/min Maximum workpiece weight: 120 kg Max. rod diameter: 65 mm Axis X1/X2: 165/190 mm Axle Z1/Z2: 700/720 mm Axis Y: 100 mm B-axis: 770 mm C1/C2 axis: 360 Weight: 7800 kg Equipment: Bar feeder SS 2500 Conveyor Feeder/Dispenser

Inv. Num. : 5837 Type: LYNX 220 LSYC Producer: DOOSAN Created: 2018 Parameters: Control system: DOOSAN FANUC-i Duty cycle: 8205 h Maximum turning length: 510 mm Max. turning diameter: 300 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 400 mm Controlled axes: X/Z/Y/C1/C2/B Maximum travel length in the X-axis: 205 mm Maximum feed rate in the Z-axis: 560 mm Axis Y: 105 mm C1/C2 axis: 360 Maximum main spindle power: 15 kW Spindle clearance: 76 mm Minimum main spindle speed: 45 1/min Maximum spindle speed: 4500 1/min Maximum workpiece weight: 300 kg Maximum travel length in the B-axis: 560 mm Max. passage of bar material: 65 mm Length: 2880 mm Width: 1710 mm Height: 1920 mm Weight: 4200 kg Equipment: Bar feeder SS 2500 Conveyor

Inv. Num. : 7470 Type: INTEGREX 35 Producer: MAZAK Created: 1998 Parameters: Control System: Mazatrol T Plus Hours: 8305 h Maximum turning length: 720 mm Maximum turning diameter over bed: 315 mm Maximum travel length in the X-axis: 450 mm Maximum travel length in the Y-axis: 180 mm Maximum feed rate in the Z-axis: 1065 mm Minimum main spindle speed: 35 1/min Maximum spindle speed: 3300 1/min Number of axle: 4 Power consumption: 50 kW Tool magazine: 80 pieces Rapid traverse X/Y/Z: 12000/11547/18000 mm/min Length: 4500 mm Width: 3200 mm Height: 2600 mm Weight: 6500 kg Equipment: chuck TOS Svitavy UIS 315/6-1-M1

Inv. Num. : 7432 Type: SW 32 Producer: Goodway Created: 2017 Parameters: Side length: 315 mm Max. turning diameter: 32 mm Weight: 3200 kg  ... more information

Inv. Num. : 7447 Type: NT 2000 SY Producer: YCM Created: 2015 Parameters: Control System: FANUC TXP-200FB Maximum turning diameter: 350 mm Max. turning length: 519 mm Spindle diameter: 52 mm Number of tools: 12 pieces Axis Y: 50 mm Weight: 7600 kg Equipment: Technical Documentation Conveyor Shovel Spacesaver SS2220 Bar Feeder Tool Probe BMT65 Brackets (External/Front/Internal/2pcs Powered) High Pressure Pump 2x universal chuck for both spindles 3x collet clamp for both spindles Preparation for the connection of the mist collector

Inv. Num. : 7421 Type: SL 30 HE Producer: HAAS Created: 2001 Parameters: To GO Control system: HAAS Spindle bore: 65 mm Max. turning length: 660 mm Number of tools in the storage container: 12xVDI40 pieces Maximum turning diameter over bed: 533 mm Spindle speeds: 3400 1/min Maximum main spindle power: 22.4 kW Equipment: Bake Tool Holder High-pressure cooling Tool Probe